699655
184
Verklein
Vergroot
Pagina terug
1/223
Pagina verder
184
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Setting Item Default Value Setting Details
Subwoofer 0.0dB Control the effect of standing waves for the
subwoofer.
1. After selecting "Filter" with
/ , select the lter
to be adjusted from "1" to "3" with / and
press ENTER.
2. After selecting the central frequency with / ,
adjust the bandwidth with / , then adjust
the attenuation with / . The central frequency
can be selected between "63Hz" and "250Hz".
The bandwidth can be selected between "2.0"
and "9.8" (0.2 intervals). Attenuation can be
selected between "0.0dB" and "12.0dB" (0.5dB
intervals).
EQ Adjust
If you perform Full Auto MCACC then settings are automatic, but you can also
adjust the output volume of the range of each connected speaker to suit your own
preferences. You can adjust the volume of the different sound ranges for each of
the speakers. You can select up to 4 bands for the Subwoofer and 9 bands for all
other speakers. If the overall volume balance changes by adjusting the volume of
each frequency, you can readjust the balance in "Trim".
Setting Item Default Value Setting Details
Front Left 0.0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "–12.0 dB"
and "+12.0 dB" (in 0.5 dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Setting Item Default Value Setting Details
Center 0.0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "–12.0 dB"
and "+12.0 dB" (in 0.5 dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Conguration"
- "Speaker Channels" matches the number of
connected channels.
Front Right 0.0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "–12.0 dB"
and "+12.0 dB" (in 0.5 dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
184

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer SC-LX704 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer SC-LX704 in de taal/talen: Engels als bijlage per email.

De handleiding is 19,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer SC-LX704

Pioneer SC-LX704 Snelstart handleiding - Nederlands - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Nederlands - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Deutsch - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Deutsch - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - English, Français - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Français - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Italiano - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Italiano - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Espanõl - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Espanõl - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Svenska - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Svenska - 223 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info