577805
103
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
103
The System Setup and Other Setup menus
12
! 5.2 +ZONE 2+HDZONE – Select to use the surround back (ZONE 2) and front wide (HDZONE) speaker termi-
nals for an independent systems in another zone (see Using the MULTI-ZONE controls on page 84 ).
! 5.2ch + SP-B Bi-Amp – Select this setting if you’re bi-amping your B speakers (see Bi-amping your speakers
on page 25 ).
! 5.2ch F+Surr Bi-Amp – Select this setting if you’re bi-amping your front and surround speakers (see
Bi-amping your speakers on page 25 ).
! 5.2ch F+C Bi-Amp – Select this setting if you’re bi-amping your front and center speakers (see Bi-amping
your speakers on page 25 ).
! 5.2ch C+Surr Bi-Amp – Select this setting if you’re bi-amping your center and surround speakers (see
Bi-amping your speakers on page 25 ).
! Multi-ZONE Music – See Using Multi-ZONE Music on page 103 .
3 If you selected 7.2.2ch TMd/FW, 7.2.2ch TMd/FH, 7.2ch + Speaker B, 7.2ch + Front Bi-Amp,
or 7.2ch + HDZONE in Step 2, select the placement of the surround speakers.
In a 7.2-channel surround system with surround speakers placed directly at the sides of the listening position,
the surround sound of 5.1-channel sources is heard from the side. This function mixes the sound of the surround
speakers with the surround back speakers so that the surround sound is heard from diagonally to the rear as it
should be.
Depending on the positions of the speakers and the sound source, in some cases it may not be possible to
achieve good results. In this case, set the setting to ON SIDE or IN REAR.
! ON SIDE – Select when the surround speakers is positioned right beside you.
! IN REAR – Select when the surround speaker is positioned obliquely behind you.
4 When ‘Setting Change?’ is displayed, select Yes.
If No is selected, the setting is not changed.
You will return to the Manual SP Setup menu.
Using Multi-ZONE Music
Multi-ZONE Music can be used to play the same sound in the MAIN ZONE, ZONE 2 and ZONE 3, for example for
home parties. Normally set Speaker System to 5.2 +ZONE 2+ZONE 3 for multi-zone/multi-source playback, then
switch it to Multi-ZONE Music when having a home party. When this is done, the sound of the input function
selected for the MAIN ZONE is played in all zones (the MAIN ZONE, ZONE 2 and ZONE 3).
! There is virtually no delay in the sound.
! Switching of the input for only ZONE 2 or ZONE 3 is disabled, but the volume can be adjusted or muted for the
individual zones.
! This is only valid for ZONE 2 and ZONE 3 connections using the speaker terminals. No sound is output from the
ZONE 2 and ZONE 3 pre-out terminals. Nothing is output from the ZONE 2 and ZONE 3 COMPONENT VIDEO
output and VIDEO output terminals.
! The HDZONE setting does not apply to Multi-ZONE Music.
Speaker Setting
Use this setting to specify your speaker configuration (size, number of speakers and crossover frequency). It
is a good idea to make sure that the settings made in Automatically conducting optimum sound tuning (Full
Auto MCACC) on page 48 are correct. Note that this setting applies to all MCACC presets, and cannot be set
independently.
1 Select ‘Speaker Setting’ from the Manual SP Setup menu.
2 Choose the set of speakers that you want to set, then select a speaker size.
Use k/l to select the size (and number) of each of the following speakers:
! Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a
subwoofer. Select SMALL to send the bass frequencies to the subwoofer.
! Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to
send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO
(the center channel is sent to the front speakers).
! TMd – Select LARGE if your top middle speakers reproduce bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or subwoofer. When Dolby Enabled Speaker is used, select
Dolby Sp (page 23 ). If you didn’t connect the top middle speakers, choose NO (the top middle channel is
sent to the front speakers).
You can adjust this setting only when Speaker System setting is 7.2.2ch TMd/FW, 7.2.2ch TMd/FH,
5.2.4ch or 7.2ch + Speaker B.
If you change the setting from Dolby Sp to SMALL or LARGE, the set value for Speaker Distance
may be changed. This is because the maximum value of Speaker Distance when set to Dolby Sp is
bigger than the maximum value of Speaker Distance when set to SMALL and LARGE. If the value of
Speaker Distance set to Dolby Sp exceeds the maximum value of Speaker Distance for SMALL and
LARGE, Speaker Distance for SMALL and LARGE is set to its maximum value.
! TFw – Select LARGE if your top forward speakers reproduce bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or subwoofer. When Dolby Enabled Speaker is used, select
Dolby Sp (page 23 ). If you didn’t connect the top forward speakers, choose NO (the top forward channel is
sent to the front speakers).
You can adjust this setting only when Speaker System setting is 5.2.4ch.
When you set TBw to NO, this setting is automatically set to NO.
If you change the setting from Dolby Sp to SMALL or LARGE, the set value for Speaker Distance
may be changed. This is because the maximum value of Speaker Distance when set to Dolby Sp is
bigger than the maximum value of Speaker Distance when set to SMALL and LARGE. If the value of
Speaker Distance set to Dolby Sp exceeds the maximum value of Speaker Distance for SMALL and
LARGE, Speaker Distance for SMALL and LARGE is set to its maximum value.
! TBw – Select LARGE if your top backward speakers reproduce bass frequencies effectively, or select SMALL
to send bass frequencies to the other speakers or subwoofer. When Dolby Enabled Speaker is used, select
Dolby Sp (page 23 ). If you didn’t connect the top backward speakers, choose NO (the top backward chan-
nel is sent to the front speakers).
You can adjust this setting only when Speaker System setting is 5.2.4ch.
When you set TFw to NO, this setting is automatically set to NO.
If you change the setting from Dolby Sp to SMALL or LARGE, the set value for Speaker Distance
may be changed. This is because the maximum value of Speaker Distance when set to Dolby Sp is
bigger than the maximum value of Speaker Distance when set to SMALL and LARGE. If the value of
Speaker Distance set to Dolby Sp exceeds the maximum value of Speaker Distance for SMALL and
LARGE, Speaker Distance for SMALL and LARGE is set to its maximum value.
 
103

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer SC-LX58-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer SC-LX58-S in de taal/talen: Engels als bijlage per email.

De handleiding is 16,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer SC-LX58-S

Pioneer SC-LX58-S Snelstart handleiding - Nederlands - 76 pagina's

Pioneer SC-LX58-S Gebruiksaanwijzing - Nederlands - 145 pagina's

Pioneer SC-LX58-S Snelstart handleiding - Deutsch - 76 pagina's

Pioneer SC-LX58-S Gebruiksaanwijzing - Deutsch - 147 pagina's

Pioneer SC-LX58-S Snelstart handleiding - English, Français - 76 pagina's

Pioneer SC-LX58-S Gebruiksaanwijzing - Français - 144 pagina's

Pioneer SC-LX58-S Snelstart handleiding - Italiano - 76 pagina's

Pioneer SC-LX58-S Gebruiksaanwijzing - Italiano - 143 pagina's

Pioneer SC-LX58-S Snelstart handleiding - Espanõl - 76 pagina's

Pioneer SC-LX58-S Gebruiksaanwijzing - Espanõl - 143 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info