Handleiding Pioneer SC-2024 (pagina 90 van 126) (Engels)

611800

Verklein

Vergroot

Pagina terug

1/126

Pagina verder

The System Setup and Other Setup menus

Making receiver settings from the System Setup menu

The following section describes how to change the speaker-related settings manually and make various other

settings (input selection, OSD language selection, etc.).

! With factory default settings, the on-screen display will be output from all HDMI output terminals and

displayed on any TV connected via HDMI cable. You can change where the screen is output in the

MAIN/HDZONE (page 95 ) and HDMI output (page 72 ) settings.

1 Press u STANDBY/ON to switch on the receiver and your TV.

Make sure that the TV’s video input is set to this receiver.

2 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

! Press HOME MENU at any time to exit the HOME MENU.

3 Select ‘System Setup’ from the HOME MENU, then press ENTER.

4 Select the setting you want to adjust.

! Manual SP Setup – Sets the type of connection used for surround back terminals and the size, number dis-

tance and overall balance of the connected speakers (see Manual speaker setup on page 90 ).

! Input Setup – Specifies what you’ve connected to the digital, HDMI and component video inputs (see The

Input Setup menu on page 41 ).

! OSD Language – The GUI screen’s display language can be changed (see Changing the OSD display lan-

guage (OSD Language) on page 42 ).

! Network Setup – Conducts the setup necessary to connect this unit to the network (see Network Setup

menu on page 92 ).

! HDMI Setup – Synchronizes this receiver with your Pioneer component supporting Control with HDMI (page

63 ).

! MHL Setup – Changes the settings related to MHL (see MHL Setup on page 93 ).

! Other Setup – Makes customized settings to reflect how you are using the receiver (see The Other Setup

menu on page 94 ).

Manual speaker setup

This receiver allows you to make detailed settings to optimize the surround sound performance. You only need

to make these settings once (unless you change the placement of your current speaker system or add new

speakers).

These settings are designed to customize your system, but if you’re satisfied with the settings made in

Automatically conducting optimum sound tuning (Full Auto MCACC) on page 39 , it isn’t necessary to make all

of these settings.

CAUTION

! The test tones used in the Manual SP Setup are output at high volume.

1 Select ‘Manual SP Setup’, then press ENTER.

See Making receiver settings from the System Setup menu on page 90 if you’re not already at this screen.

2 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

! Speaker System – Specifies how you are using your surround back speaker terminals and B speaker termi-

nals (page 90 ).

! Speaker Setting – Specifies the size and number of speakers you’ve connected (page 90 ).

! Channel Level – Adjusts the overall balance of your speaker system (page 91 ).

! Speaker Distance – Specifies the distance of your speakers from the listening position (page 91 ).

! X-Curve – Adjusts the tonal balance of your speaker system for movie soundtracks (page 91 ).

3 Make the adjustments necessary for each setting, pressing RETURN to confirm after each

screen.

Speaker system setting

! Default setting: Normal(SB/FH)

There are several ways you can use the speaker terminals with this receiver. In addition to a normal home theater

setup where they are used for the front height speakers or front wide speakers, they can be used for bi-amping

the front speakers or as an independent speaker system in another room.

1 Select ‘Speaker System’ from the Manual SP Setup menu.

See Making receiver settings from the System Setup menu on page 90 if you’re not already at this screen.

2 Select the speaker system setting.

! Normal(SB/FH) – Select for normal home theater use with front height speakers in your main (speaker sys-

tem A) setup.

! Normal(SB/FW) – Select for normal home theater use with front wide speakers in your main (speaker system

A) setup.

! Speaker B – Select to use the B speaker terminals to listen to stereo playback in another room (see Switching

the speaker terminals on page 72 ).

! Front Bi-Amp – Select this setting if you’re bi-amping your front speakers (see Bi-amping your speakers on

page 22 ).

! ZONE 2 – Select to use the surround back speaker terminals for an independent system in another zone (see

Using the MULTI-ZONE controls on page 73 ).

! HDZONE – Select to use the surround back speaker terminals for an independent system in HDZONE (see

Using the MULTI-ZONE controls on page 73 ).

3 If you selected Normal(SB/FH), Normal(SB/FW), or Speaker B in Step 2, select the placement

of the surround speakers.

In a 7.1-channel surround system with surround speakers placed directly at the sides of the listening position,

the surround sound of 5.1-channel sources is heard from the side. This function mixes the sound of the surround

speakers with the surround back speakers so that the surround sound is heard from diagonally to the rear as it

should be.

Depending on the positions of the speakers and the sound source, in some cases it may not be possible to

achieve good results. In this case, set the setting to ON SIDE or IN REAR.

! ON SIDE – Select when the surround speakers is positioned right beside you.

! IN REAR – Select when the surround speaker is positioned obliquely behind you.

4 When ‘Setting Change?’ is displayed, select Yes.

If No is selected, the setting is not changed.

You will return to the Manual SP Setup menu.

Speaker Setting

Use this setting to specify your speaker configuration (size, number of speakers and crossover frequency). It

is a good idea to make sure that the settings made in Automatically conducting optimum sound tuning (Full

Auto MCACC) on page 39 are correct. Note that this setting applies to all MCACC presets, and cannot be set

independently.

1 Select ‘Speaker Setting’ from the Manual SP Setup menu.

2 Choose the set of speakers that you want to set, then select a speaker size.

Use k/l to select the size (and number) of each of the following speakers:

Pioneer SC-2024 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer SC-2024

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info