34
Audio Adjustment <Network>
Inputting the distance to be corrected (Delay Time)
Scope of adjustment: 0 cm to 192.5 cm (0.77 cm/1 step)
(S.W.: 0 cm to 385 cm (1.54 cm/1 step))
Note:
• The correct distance can not be input unless these operations are conducted.
S.W. (ultrabass-range) Ô LOW (low-range) Ô MID (mid-range) Ô HIGH (high-
range)
5. Press FUNCTION buttons 1 or 2
and select the band to input.
Each press of the FUNCTION buttons
1 or 2 select the desired band in the
following order:
4. Press FUNCTION buttons 3 or 5
and select the speaker channel to
input.
Press the buttons to switch between left
(L) and right (R).
3.
Press the FUNCTION button 6
and select the driver’s seat (posi-
tion).
Press the buttons to switch between
“FRONT-R” and “FRONT-L”. Select
the position when measuring the
distance to be corrected as shown on
the page 33.
2. Press the FUNCTION button 2.
The display switches to time alignment adjustment screen, allowing time alignment
adjustment.
1. Open the cover of the remote control in the network menu (refer to page 5).
This switches to network menu setting screen.
