573928
138
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
The Initial Setup menu
16
138
En
Additional information about the TV system
settings
About the input line system
This recorder is compatible with PAL, SECAM, 3.58 NTSC
and PAL-60 TV systems. The Input Line System and Input
Colour System settings determine how the recorder
treats incoming video signals from an external input.
Please note the following points when changing the
input line system:
When the current input is a built-in tuner channel
preset, changing the input line system will usually
also affect the input line system of the AV2(INPUT 1/
DECODER) input. However if the AV2/L1 In setting is
set to Decoder, then the L2 input is affected instead.
If, when the Input Line System setting is changed, the
screen goes blank (due to incompatibility with your
TV), you can switch back by pressing and holding the
front panel STOP button then pressing VIDEO IN
(also front panel) while the recorder is stopped.
When you switch the Input Line System setting the
Copy List is erased. If you switch the setting using the
STOP button and VIDEO IN buttons as described
above, there is no confirmation, so please use with
care.
You can’t mix recordings of different TV line systems
on the same disc.
When you change this setting, the Input Colour
System setting also changes (see below).
About NTSC on PAL TV
Depending on the Input Line System setting and the
NTSC on PAL TV setting, the signal format output when
the recorder is stopped varies as shown in the table
below.
Remote Control
Mode
Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same room, set them to
different IDs. This setting sets the recorder ID; to change the remote
controller ID, press and hold RETURN/EXIT then press 1, 2 or 3 to set. The
remote will only control a recorder with the same ID.
AV. Link This Recorder Only
Signals received through the AV input when the recorder is in standby are
not passed through to the AV output.
Pass Through
Signals received when in standby are passed though to the output for
connected devices. (Note that during EPG data download, the EPG data is
not passed through.)
When set to Pass Through, make sure to set Power Save (page 129) to Off.
DivX VOD Registration Code Use to display the recorder’s DivX registration code. See DivX video com-
patibility on page 43 and DivX® VOD content on page 43.
Set Preview
(HDD only)
Quick Preview • When in the Disc Navigator, the thumbnail video plays short excerpts from
throughout the selected title. (Note that edited titles that will play normally
from the beginning.)
Normal The thumbnail video plays from the beginning of the title.
CI Information Next Screen
This option displays a menu of CI card functions. Consult your service
provider for more information on the functions available.
Software Update Next Screen
The Software Update function can check for and download updated system
software for the digital tuner. See Using Software Update (Digital tuner) on
page 139.
Setting Options Explanation
Input Line System
NTSC on PAL
TV
Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
138

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer RCS-656HX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer RCS-656HX in de taal/talen: Engels als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer RCS-656HX

Pioneer RCS-656HX Gebruiksaanwijzing - English - 156 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Français - 155 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Dansk, Svenska, Suomi - 464 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info