573928
98
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
Playing and recording from a DV camcorder
09
98
En
Chapter 9
Playing and recording from a DV
camcorder
You can play back and record video from a DV camcorder
connected to the DV IN jack on the front panel of this
recorder.
Important
If you connect a second recorder using a DV cable,
you cannot control the second unit from this one.
You can’t control this unit remotely from a component
connected to the DV IN jack.
Playing from a DV camcorder
1 Make sure your DV camcorder is connected to
the front panel DV IN jack.
2 From the Initial Settings menu, check that the DV
audio input is setup as you require.
See DV Input on page 133 for more on this.
Check also that the Audio In settings for External
Audio and Bilingual Recording are as you want
them (see Audio In on page 133).
3 Select ‘DV’, then ‘DV Video Playback’
from the Home Menu.
4 Start playback on the camcorder.
Images from the camcorder should appear on your TV.
To record the incoming video, press HDD/DVD to select
the HDD or a DVD for recording, then press ì REC.
Press
STOP REC to finish recording.
If there is no signal from the device connected to the
DV jack, or the signal is copy-protected, recording
will pause. It will automatically restart once there is a
recordable signal.
The recorder will only start recording from the DV IN
jack if there is a valid signal. Recording will pause if
the signal is interrupted during recording.
If your source is copy-protected using Copy Guard,
you will not be able to record it. See Restrictions on
video recording on page 79 for more details.
Recording from a DV camcorder
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Important
The source signal must be DVC-SD format.
Some camcorders cannot be controlled using this
recorder’s remote.
You can’t record date and time information from DV
cassette.
During DV recording, if a part of the tape is blank, or
has copy-protected material on it, this recorder will
pause recording. Recording will restart automatically
when there is a recordable signal. However, if there is
more than 10 seconds of blank tape, this recorder will
stop recording and the camcorder should stop
(depending on the camcorder).
For best results when recording from a DV camcorder to
this recorder, we recommend cueing the camcorder to
the place you want to start recording from and setting the
camcorder to play-pause.
1 Make sure your DV camcorder is connected to
the front panel DV IN jack.
Also, set the camcorder to VTR mode.
2 Set the recording quality.
See Setting the picture quality/recording time on
page 82 for detailed information.
3 From the Initial Settings menu, check that the DV
audio input is setup as you require.
See DV Input on page 133 for more on this.
Check also that the Audio In settings for External
Audio and Bilingual Recording are as you want
them (see Audio In on page 133).
4 Select ‘DV’, then ‘Copy from a DV
Source’ from the Home Menu.
DV recording only works when the DV camcorder is
in VTR mode with a tape loaded.
5 Select ‘Record to Hard Disk Drive’ or
‘Record to DVD’.
HOME MENU
REC MODE
HOME MENU
ENTER
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer RCS-656HX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer RCS-656HX in de taal/talen: Engels als bijlage per email.

De handleiding is 9,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer RCS-656HX

Pioneer RCS-656HX Gebruiksaanwijzing - English - 156 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Français - 155 pagina's

Pioneer RCS-656HX Gebruiksaanwijzing - Dansk, Svenska, Suomi - 464 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info