707105
14
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
En
14
Operation
Turning the power on
1 Make all the connections, then plug the power cord
into a power outlet.
= Connections (p. 12 )
2 Change the [POWER] switch to the [ON] side to turn
on the power of the unit.
This unit’s indicators light and the power turns on.
Turning the power off
Change the [POWER] switch to the [OFF] side to turn off
the power of the unit.
This unit’s power turns off.
Playback
Prepare as follows.
! Place a record on the turntable.
! Remove the stylus cover and arm clamper.
1 Change the [POWER] switch to the [ON] side to turn
on the power of the unit.
2 Select the rotation speed to match the record to be
played by pressing a speed change button.
3 Press the [START/STOP] button.
The turntable rotates.
4 Pull up the lifter lever and move the tone arm onto
the record.
5 Push down the lifter lever.
The tone arm slowly descends and playback begins.
Pausing playback
Pull up the lifter lever.
The stylus of the cartridge lifts away from the record.
! To resume playback, push down the lifter lever.
Finishing playback
1 Pull up the lifter lever to return the tone arm to the
arm rest and then push down the lifter lever.
2 Press the [START/STOP] button.
The turntable stops smoothly.
3 Change the [POWER] switch to the [OFF] side to turn
off the power of the unit.
Use the arm clamper to secure the tone arm.
To protect the stylus tip, attach the stylus cover.
Close the dust cover.
Adjusting the pitch
Move the [TEMPO] slider forward or backward.
Moving the slider forward increases the rotation speed and moving it
backward decreases the rotation speed.
! When the [TEMPO] slider is at the center, the indicator lights in
yellow-green and the rotation speed becomes the specified rpm
(33 1/3 rpm, 45 rpm, or 78 rpm).
! The scale of the [TEMPO] slider is a rough value. Please use it as a
guide.
! You can confirm that the rotation speed has become the specified
rpm by looking at the four rows of strobe patterns inscribed around
the turntable.
Strobe pattern
1 When the strobe pattern appears stopped, 33 1/3 rpm (50 Hz power
supply)
2 When the strobe pattern appears stopped, 45 rpm (50 Hz power
supply)
3 When the strobe pattern appears stopped, 33 1/3 rpm (60 Hz power
supply)
4 When the strobe pattern appears stopped, 45 rpm (60 Hz power
supply)
! A strobe illuminator (red LED light) is used to illuminate the strobe
pattern of this unit. When checking the pitch, always use the strobe
illuminator light.
Displaying a record jacket
Place the record jacket behind the stoppers attached to the dust cover
as shown in the figure.
StoppersRecord jacket
! Do not place anything other than a record jacket.
! Place the record jacket secured behind the stoppers properly.
! When using this feature during playback, be careful that the record
jacket does not fall. The record or stylus may be damaged.
! Be careful not to close the dust cover while a record jacket is placed
on it.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-PLX-500

Zoeken resetten

  • Beste,
    Vandaag mijn Pioneer 500 getest met een LP.
    Bij het einde van deze LP (groeven)blijft hij draaien ?
    Wat doe ik verkeerd?
    Kan er ook niets van vinden.
    Grtn jo.mast@telenet.be

    Gesteld op 21-12-2022 om 23:06

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer PLX-500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer PLX-500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info