Handleiding Pioneer CNDV-1000HD (pagina 6 van 8) (Engels)

649260

Verklein

Vergroot

Pagina terug

1/8

Pagina verder

Input screen for “Address Book”, “Phone

Book”, “LIBRARY (Music Library)”

Others, 0-9:

Touch to toggle the selection.

Small, Caps.:

This is a new feature. Either lowercase or

uppercase letters can be selected. Touch to

toggle the selection.

Input screen for “Edit VIN” and “Edit

Policy Number”

Small, Caps.:

This is a new feature. Either lowercase or

uppercase letters can be selected. Touch to

toggle the selection.

Time restrictions

This is a new feature. This setting controls

whether streets or bridges have traffic restric-

tions during a certain time should be taken

into account.

p If you want to set your route to avoid raised

draw bridges, select “On”.

p Settings marked with an asterisk (*) show

that these are default or factory settings.

1 Touch the key in the following order in

the navigation menu.

[Destination] d [Route Overview] d [Op-

tions]

p “Route Overview” is active only when the

route is set.

2 Touch [Time restrictions] to change the

route calculation conditions.

Touching this option switches the setting “ On”

or “Off”.

On*:

Calculates a route while avoiding streets or

bridges with traffic restrictions during a cer-

tain time.

Off:

Calculates a route while ignoring traffic re-

strictions.

3 Touch [OK].

The route is recalculated, and the Route con-

firmation screen appears.

p The system may calculate a route that in-

cludes streets or bridges that are subject to

traffic restrictions during a certain time

even if “On” is selected.

<IRB1021-A>21

Renewed points through

this upgrade

CAUTION

If the time difference is not set correctly, the na-

vigation system cannot consider traffic regula-

tions correctly. Set the time difference correctly

(For details, refer to the Operation Man ual of

your navigation system.)

shows for routes that contain streets or bridges

that are subject to traffic regulations during a certain

time when the setting “Time restrictions” is “On”.

2D Twin Map View and 3D

Twin Map View

Either “2D Twin Map View” or “3D Twin

Map View” can directly be selected in “View

Mode Selection” screen.

1 Press the MAP button to display a map

of the area around your current position.

2 Press the MAP button again.

3 Touch the mode name to select the

mode you want to display.

2D Twin Map View

The 2D map appears on the left screen.

3D Twin Map View

The 3D map appears on the left screen.

p Touching anywhere on the map changes

the map to the Scroll mode.

Address Book Icon

You can select whether to display the icons for

the entries of “Address Book” on the map.

p When you select “Address Book Icon Dis-

play” in “Short-Cut Selection”, you can

switch this setting with the shortcut menu.

p Settings marked with an asterisk (*) show

that these are default or factory settings.

1 Touch the key in the following order in

the navigation menu.

[Map] d [Displayed Info]

2 Touch [Address Book Icon].

Each time you touch the key changes that set-

ting.

! On*:

Displays the icon on the map.

! Off:

Hides the icon from the map.

<IRB1021-A>22

p Even if “Address Book Icon” is set to

“Off”, the alarm sounds when you ap-

proach the registered location and the

set image pops up. To turn off the sound

output and image pop up, select

“No Sound” and “No Picture” for the

entry.

p If you set

(dot), the registered name

of that entry can be displayed on the

map. The registered name does not ap-

pear if “Address Book Icon” is set to

“Off”.

3D Landmark

You can select whether to display the 3D land-

mark on the map.

p 3D landmark only appears when the view

mode is “3D Twin Map View” and the

map scale is set to 0.25 mile (200 m) or

lower.

p Settings marked with an asterisk (*) show

that these are default or factory settings.

1 Touch the key in the following order in

the navigation menu.

[Map] d [Displayed Info]

2 Touch [3D Landmark].

Each time you touch the key changes that set-

ting.

! On*:

Displays the 3D landmark on the map.

! Off:

Hides the 3D landmark on the map.

Traffic event icon and line

p Middle-sized icon is displayed on the map

scale between 1 mile to 2.5 miles (2 km to

5 km).

p The traffic-related items can be shown on

the detailed city map.

Browsing the XM special

contents

The following features have been modified to

enhance ease of operation.

Storing browsable information

XM special contents can be stored as “My Fa-

vorites” so that it can be accessed without

searching every time an update is needed.

p The displayed items depend on the infor-

mation that is sent from each station.

p “My Favorites” can store up to 50 items.

1 Touch [Information] in the navigation

menu, then touch [Set My Favorites].

The screen will display a list of categories. The

information appearing on screen is automati-

cally updated at regular intervals.

2 Touch a category you want to browse

from the list.

<IRB1021-A>23

3 Touch an item you wish to store.

If an item is divided into more detail cate-

gories, select the one from the list to narrow

down the category. After narrowing down, the

message confirming whether or not to register

the item will appear.

4 Touch [OK].

If the storing step is successful, the confirma-

tion screen will appear.

Touch [OK] to complete the storing and return

to the previous screen.

Displaying favorite browsable

Information

You can check and delete the browsable infor-

mation you registered.

1 Store the desired item (topic).

= For details, refer to Storing browsable infor-

mation.

2 Touch [Information] in the navigation

menu, and then touch [My Favorites].

A list of registered items (topics) appears on

the screen.

3 Touch an item to display the contents.

The texts appear on each items show the pro-

cess of storing in a hierarchical way.

Hands-free phoning

Device name

The default device name displayed on the cel-

lular phone changes “PIONEER NAVI” to

“PIONEER HDD NAVI”. (If you already con-

nected the Bluetooth unit, the name already

set remains. If you restore the default setting,

the device name becomes “PIONEER HDD

NAVI”.)

The display of an unknown user’s call

Depending on the caller ID service, the phone

number of the received call may not be dis-

played. [Unknown] appears instead in that

case.

Editing the entry in “Phone Book”

You can edit [ Pronunciation] to be used for

voice recognition along with [Name], [Phone

#], or [Picture].

<IRB1021-A>24

Pioneer CNDV-1000HD Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer CNDV-1000HD

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info