Handleiding Pioneer CDJ-2000NXS (pagina 29 van 47) (Engels)

491982

Verklein

Vergroot

Pagina terug

1/47

Pagina verder

Advanced Operation

4 Press the [DELETE] button.

[ DELETE] or [ DELETE] is displayed on the main unit display,

and the selected point information is deleted.

! When a stored loop set as an active loop is deleted, the active loop is

also deleted.

Deleting points in units of discs

1 Load a disc in this unit.

When tracks from a medium other than a disc are loaded, load any track

from the disc.

2 Connect a storage device (SD, USB) to this unit.

The cue or loop in point is displayed on the playing address display with

a mark.

3 Press the [DELETE] button for over 5 second.

[DISC CUE/LOOP DATA-DELETE? PUSH MEMORY] appears on the

main unit display.

4 Press the [MEMORY] button.

All cue and loop points for the disc currently loaded in this unit are

deleted.

! The delete mode is canceled if any button other than [MEMORY] is

pressed.

Deleting all the disc information stored

on a storage device (SD, USB)

Connect the storage device (SD, USB) on which the disc information is

stored to this unit.

1 With no disc loaded on this unit, press the [DELETE]

button for over 5 seconds.

[DISC CUE/LOOP DATA-DELETE ALL? PUSH MEMORY] appears on the

main unit display.

2 Press the [MEMORY] button.

All the disc information stored on the storage device (SD, USB) is

deleted.

! The delete mode is canceled if any button other than [MEMORY] is

pressed.

Setting the cue point for auto

cueing

The cue point to be set as the auto cue can be selected using one of the

methods below.

Setting the cue point by the acoustic pressure level

identified as a silent section (8 levels)

–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB

Automatically setting stored cues as cue points

MEMORY: The stored cue point nearest the beginning of the track is set

as the cue point for auto cueing.

! When [MEMORY] is set, [A. CUE] lights in white on the main unit

display.

The setting of the cue point for auto cueing can be changed using one of

the methods below.

Using the [MENU (UTILITY)]button

1 Press the [MENU/UTILITY] button for over 1 second.

The [UTILITY] screen is displayed.

2 Turn the rotary selector then press it.

Select [AUTO CUE LEVEL].

3 Turn the rotary selector then press it.

Select the acoustic pressure level or [MEMORY].

Using the [TIME MODE (AUTO CUE)] button

1 Press the [TIME MODE/AUTO CUE] button for over 5

second.

The currently set value is displayed on the main unit display.

2 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or

[CUE/LOOP CALL d(LOOP 2X)] button.

Select the acoustic pressure level or [MEMORY].

Using the slip mode

When the slip mode is turned on, normal playback with the original

rhythm continues in the background while in the pause (vinyl mode),

scratch play, loop play, hot cue play and reverse play modes. When the

slip mode is canceled, normal playback resumes from the point reached

while the slip mode was turned on.

! When the quantize function is on, there may be a slight delay in

operation of this function in order to synchronize the beat.

(Slip beat loop, slip reverse and slip hot cue only)

Display of the position playing in the background

! When in the slip mode, the currently playing position is indicated

by a yellow line on the main unit display’s waveform display (overall

waveform or enlarged waveform). The position playing in the back-

ground is indicated by a white line on the main unit display’s wave-

form display (overall waveform).

! It is also displayed on the jog dial’s slip play display.

Slip pausing

1 Press the [JOG MODE] button.

Set the jog mode to VINYL.

2 Press the [SLIP] button.

The mode switches to the slip mode.

3 During playback, press the [PLAY/PAUSE f] button.

Normal playback continues in the background even while in the pause

mode.

The [SLIP] button flashes in beat with the sound playing in the

background.

4 Press the [PLAY/PAUSE f] button to cancel the

pause mode.

Normal playback of the sound that was playing in the background

resumes.

Slip scratching

1 Press the [JOG MODE] button.

Set the jog mode to VINYL.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Pioneer CDJ-2000NXS Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer CDJ-2000NXS

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info