Handleiding Pioneer AXM-P90RS (pagina 16 van 41) (Engels)

649408

Verklein

Vergroot

Pagina terug

1/41

Pagina verder

Operation Manual

AUDIO MASTER UNIT

AXM-P90RS

English

Thank you for buying this Pioneer product.

Please read through these operating instruct ions so you will know how to operate

your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

About this unit 3

Visit our website 3

In case of trouble 4

Use and care of the remote control 4

Resetting the microprocessor 5

What’s What

Display unit 6

Card remote control 6

Steering remote control 7

Basic Operations

Turning the unit on 8

Selecting a source 8

Adjusting the volume 8

Turning the unit off 8

Initial Settings

Adjusting initial settings 9

Setting the clock 9

Setting the display appearance 10

Configure the general settings 11

Setting the menu lock 11

Setting the audio processor 11

Available accessories

Playing songs on iPod 13

Multi-CD Player 15

DVD Player 18

TV tuner 21

Auxiliary (AUX) devices 22

Audio unit control

Controlling the audio processor 24

Differentia of the audio function 24

Other Functions

Other Functions 25

Connections

Connecting the power cable 27

Connecting the audio processor 28

Connecting the Pioneer IP-BUS devices 29

Connecting the AUX devices 30

Selecting the input setting switch 31

Using the speaker-RCA conversion cable 31

Installation

Installing the hide-away unit 32

Installing the display unit 33

Installing the steering remote control 37

Additional Information

Troubleshooting 39

Specifications 40

Contents

If you want to dispose this product, do not mix

it with general household waste. There is a se-

parate collection system for used electronic

products in accordance with legislation that re-

quires proper treatment, recovery and recy-

cling.

Private households in the member states of

the EU, in Switzerland and Norway may return

their used electronic products free of charge

to designated collection facilities or to a retai-

ler (if you purchase a similar new one).

For countries not mentioned above, please

contact your local authorities for the correct

method of disposal.

By doing so you will ensure that your disposed

product undergoes the necessary treatment,

recovery and recycling and thus prevent po-

tential negative effects on the environment

and human health.

About this unit

This unit is designed to control the Pioneer

Audio Processor (e.g. RS-A9 or DEQ-P90).

Using this unit converts the sound from your

car audio into the high quality sound of the

Pioneer audio processor without combining

the Pioneer ODR series CD Player or Pioneer

Reference series CD Player.

Also, the supplied remote control can control

the separately sold Pioneer DVD player (e.g.

XDV-P6), Pioneer Multi-CD player, Pioneer

iPod adaptor (e.g. CD-IB100B) and Pioneer TV

tuner.

! This unit can control five devices as AUX

sources. The following devices can be con-

nected to this unit.

— Devices with RCA output; This unit con-

trols them as AUX1 Main or

AUX2 AUX.

— Devices with digital output; This unit

controls it as AUX3 Digital.

— Devices with 3.5 mm mini plug; This

unit controls it as AUX4 MiniPlug.

— Devices with Pioneer IP-BUS; This unit

controls it as AUX5 IP-BUS.

! If the equipment you want to connect as an

AUX unit does not have an RCA output, the

supplied speaker-RCA conversion cable

can be used. For details, refer to Using the

speaker-RCA conversion cable on page 31.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with liquids.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture.

! If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

Visit our website

Visit us at the following site:

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

insurance claim such as loss or theft.

! We offer the latest information about

Pioneer Corporation on our website.

Before You Start

Section

Before You Start

In case of trouble

Should this product fail to operate properly,

contact your dealer or nearest authorized

Pioneer Service Station.

Use and care of the remote

control

Installing the battery

Slide the tray on the back of the remote con-

trol out and insert the battery with the plus (+)

and minus (–) poles pointing in the proper di-

rection.

! When using for the first time, pull out the

film protruding from the tray.

Card remote control

Steering remote control

WARNING

Keep the battery out of the reach of children.

Should the battery be swallowed, consult a doc-

tor immediately.

CAUTION

! Use one CR2025 (3 V) lithium battery.

! Remove the battery if the remote control is not

used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the

same or equivalent type.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic objects.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a

new battery.

! When disposing of used batteries, please

comply with governmental regulations or en-

vironmental public institutions’ rules that

apply in your country/area.

! Always check carefully that you are loading

the battery with its plus (+) and minus (–)

poles facing the proper directions.

Using the remote control

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

! If any of the following problems occur, imme-

diately stop using the unit and consult the

dealer from whom you purchased it.

— Smoke is coming from the unit.

— Abnormal odor is coming from the unit.

— A foreign object has entered the unit.

— Liquid has been spilled on or into the unit.

If you continue to use this unit without finding

a remedy, the unit may be damaged badly, re-

sulting in a serious accident or fire.

! Do not disassemble or modify this unit. To do

so may cause a malfunction.

! Do not operate this unit while manipulating

the steering wheel as it might result in a traffic

accident.

Before You Start

Section

! If you need to operate this unit while driving,

look ahead carefully to avoid being involved in

a traffic accident.

! Do not leave this steering remote control free

(unattached). When stopping the car or turn-

ing, the unit might drop on the floor. If the unit

rolls under the brake pedal, it might prevent

the driver from braking properly, causing ser-

ious problems. Be sure to fix the steering re-

mote control to the steering wheel.

Card remote control

! Point the remote control in the direction of

the remote control sensor to operate.

! The remote control may not function prop-

erly in direct sunlight.

Steering remote control

! Key assignment can be changed by select-

ing the DIP switch.

DIP switch

! Key assignment conversion chart

DIP

switch

1-3

1-4

2-3

2-4

1 cd

2 ba

3 da

4 ab

5 ATT ATT

6 VOLUME (–) VOLUME (+)

DIP

switch

1-3

1-4

2-3

2-4

7 SOURCE SOURCE

8 VOLUME (+) VOLUME (–)

! If DIP switch is selected to 1-3 or 2-3, the

steering remote control controls this unit.

! If DIP switch is selected to 1-4 or 2-4, this

steering remote control can be used as a

general purpose for Pioneer unit.

Resetting the microprocessor

The microprocessor must be reset under the

following conditions:

! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

% Press RESET with a pen tip or other

pointed instrument.

RESET button

Before You Start

Section

Before You Start

Display unit

1 Display off indicator

Lights up when the display indication is

turned off.

2 Information display

Display information for each connected-

source and its settings.

Card remote control

1 CD/DVD button

Press to select a iPod (iPod), Multi CD (CD

player) or DVD (DVD player) source .

2 TV button

Press to select a TV (TV) source.

3 AUX/EXT button

Press to select an AUX (AUX) or External

(external) source.

4 SOURCE button

Press to cycle through all the available

sources. Press and hold to turn the source

off.

5 PAUSE button

Press to turn pause on or off.

6 BAND button

Press to select among two TV bands and to

cancel the control mode of functions.

7 Thumb pad

Move to perform manual seek tuning, fast

forward, reverse and track search controls.

Also used for controlling functions.

Click and hold to change between normal

playback display and menu setting display.

! Clicking and holding thumb pad corre-

sponds to the opening or closing opera-

tion of the remote control cover

described in the audio processor’s man-

ual. For details, refer to audio processor’s

owner’s manual.

What’s What

Section

8 DISPLAY button

Press to display different information on the

selected channel. Press and hold to switch

the scroll setting.

9 DISPLAY OFF button

Press and hold to turn the display indication

off or on to reduce noise.

a FUNC 1 to FUNC 6 buttons

Press to select and control functions.

b RETURN button

Press to change to the menu setting display

from the detail setting display.

c SHIFT button

Press to change to the detail setting display

from the menu setting display.

d VOLUME buttons

Press to increase or decrease the volume.

e MENU button

Press to cycle through audio menus; Main

(main menu), Equalizer (equalizer menu) or

Network (network menu).

f ATT button

Press to quickly lower the volume level by

about 90%. Press once more to return to the

original volume level.

Steering remote control

g a/b/c/d buttons

Press to perform manual seek tuning, fast

forward, reverse and track search controls.

Also used for controlling functions.

g df 4

What’s What

Section

What’s What

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source, the unit is turned

on.

Selecting a source

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

TV (television)—S-DVD (DVD player/multi-

DVD player)—Multi CD (multi-CD player)—

iPod (iPod)—External (external unit 1)—

External (external unit 2)—AUX1 Main

(AUX1)—AUX2 AUX (AUX2)—AUX3 Digital

(AUX3)—AUX4 MiniPlug (AUX4)—

AUX5 IP-BUS (AUX5)

% Press CD/DVD, TV or AUX/EXT to select

a source.

Press each button repeatedly to switch be-

tween the following sources:

! CD/DVD:

S-DVD (DVD player/multi-DVD player)—

Multi CD (multi-CD player)—iPod (iPod)—

Sources off

! TV:

Television (television)—Sources off

! AUX/EXT:

External (external unit 1)—External (exter-

nal unit 2)—AUX1 Main (AUX1)—

AUX2 AUX (AUX2)—AUX3 Digital (AUX3)

—AUX4 MiniPlug (AUX4)—AUX5 IP-BUS

(AUX5)—Source off

Notes

! In the following cases, the sound source will

not change:

— When no unit corresponding to the se-

lected source is connected.

— When there is no magazine in the multi-

CD player.

— When there is no magazine in the multi-

DVD player.

— When there is no disc in the DVD player.

— When AUX (auxiliary input) is set to off

(refer to page 11).

! External unit refers to a Pioneer product (such

as ones available in the future) that, although

incompatible as a source, enables control of

basic functions with this unit. Two external

units can be controlled with this unit. When

two external units are connected, the alloca-

tion to external unit 1 or external unit 2 is auto-

matically set by this unit.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Press to increase or decrease the volume.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Basic Operations

Section

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Initial setting screen

Shows the function names and status.

1 Press SOURCE and hold until the unit

turns off.

# Pressing CD/DVD, TV or AUX/EXT can also

turn this unit off.

2 Press SHIFT to display the initial setting

display.

Clock adjustment menu, display setting menu,

general setting menu and menu lock can be

selected from this screen.

3 Press FUNC 1 to FUNC 5 to select the de-

sired setting.

FUNC 1: Press to switch to the clock adjust-

ment menu. (Setting the clock on this page)

FUNC 2: Press to switch to the display setting

menu. (Setting the display appearance on the

next page)

FUNC 3: Press to switch to the general setting

menu. (Configure the general settings on page

11)

FUNC 4: Press to turn the menu lock on or off.

(Setting the menu lock on page 11)

FUNC 5: Press to switch to the audio proces-

sor setting menu. (Setting the audio processor

on page 11)

4 Press BAND to exit the initial setting

display.

Setting the clock

Use these instructions to set the clock.

Switching to clock adjustment

screen

% Press FUNC 1 on the initial setting

screen.

Clock adjustment screen is displayed and the

clock can now be set.

Setting the clock

1 Move the thumb pad to select the seg-

ment of the clock display you wish to set.

Moving the thumb pad left or right will select

one segment of the clock display:

Hour—Minute

2 Move the thumb pad to set the clock.

Moving the thumb pad up will increase the se-

lected hour or minute. Moving the thumb pad

down will decrease the selected hour or min-

ute.

Setting the clock by the time signal

% Press FUNC 2 on the clock adjustment

screen.

Pressing FUNC 2 will reset the minutes seg-

ment.

If 00 to 29, the minutes are rounded down.

(e.g., 10:18 becomes 10:00.)

If 30 to 59, the minutes are rounded up. (e.g.,

10:36 becomes 11:00.)

Initial Settings

Section

Initial Settings

Turning the off clock display on

or off

If the off clock display is turned on, the clock

appears on the display when the sources are

off.

% Press FUNC 1 on the clock adjustment

screen.

Pressing FUNC 1 repeatedly will turn the clock

display on or off.

Returning to the initial setting

screen

% Press RETURN.

Pressing RETURN takes you back to the initial

setting display.

Setting the display

appearance

Switching to display setting screen

% Press FUNC 2 on the initial setting

screen.

Display setting screen is displayed. Display

settings can now be set.

Adjusting the brightness

You can adjust the display brightness.

% Move the thumb pad to adjust the

brightness level.

Moving the thumb pad left or right increases

or decreases the brightness level.

Switching the dimmer setting

To prevent the display from being too bright at

night, the display is automatically dimmed

when the car’s headlights are turned on. You

can turn the dimmer on or off.

% Press FUNC 1 on the display setting

screen.

Pressing FUNC 1 repeatedly will turn the dim-

mer on or off.

Selecting the wallpaper pattern

You can select a display wallpaper.

% Press FUNC 2 on the display setting

screen.

Pressing FUNC 2 repeatedly will switch the

display wallpaper.

Switching the reverse mode

If you do not perform an operation for about

30 seconds, screen indications start to reverse,

and continue reversing every 10 seconds.

% Press FUNC 3 on the display setting

screen.

Pressing FUNC 3 repeatedly will turn the re-

verse mode on or off.

Returning to the initial setting

screen

% Press RETURN.

Pressing RETURN takes you back to the initial

setting display.

Initial Settings

Section

Configure the general settings

Switching to general setting

screen

% Press FUNC 3 on the initial setting

screen.

General setting screen is displayed and gener-

al settings are now available.

Switching the auxiliary setting

This unit can control up to five auxiliary de-

vices. Each auxiliary device’s setting must be

activated independently in order to connect

and use with this unit. Before using auxiliary

devices, be sure to configure this setting.

1 Press FUNC 1 on the general setting

screen.

AUX setting screen is displayed and AUX set-

tings are now available.

2 Press the button (FUNC 1 to FUNC 5)

that has auxiliary device assigned.

Pressing the button (FUNC 1 to FUNC 5) re-

peatedly will turn the auxiliary device on or off

independently.

Setting the battery voltage

indication

Shows the battery voltage.

! Voltage indicator may differ from the actual

voltage level.

% Press FUNC 2 on the general setting

screen.

Pressing FUNC 2 repeatedly will turn the bat-

tery voltage indication on or off.

Setting the confirmation sound

The short beep that sounds when operating

this unit can be turned on or off.

! This function is effective only when the re-

mote control sensor is installed.

% Press FUNC 3 on the general setting

screen.

Pressing FUNC 3 repeatedly will turn the con-

firmation beep sound on or off.

Returning to the initial setting

screen

% Press RETURN.

Pressing RETURN takes you back to the initial

setting display.

Setting the menu lock

Menu lock avoids the readjusting of audio set-

tings. If menu lock is turned on, all audio ad-

justment are turned off.

Setting the menu lock

% Press FUNC 4 on the initial setting

screen.

Pressing FUNC 4 repeatedly will turn the

menu lock on or off.

Setting the audio processor

In order to use this system correctly, this unit

needs to be adapted to the connected audio

processor. Before using this system, set this

function correctly.

Initial Settings

Section

Initial Settings

Setting the audio processor

1 Press FUNC 5 on the initial setting

screen.

Audio processor setting screen is displayed

and audio processor settings are now avail-

able.

2 Press FUNC 1 to FUNC 4 to select the

connected audio processor.

! DEQ: When DEQ-P90 is connected.

! A9: When RS-A9 is connected.

! P90: When RS-P90 is connected.

! P70: When RS-P70x (

) is connected.

— RS-P70x (

) is only available in Japan.

Initial Settings

Section

Playing songs on iPod

Listening to songs on your iPod

You can use this unit to control an interface

adapter for iPod, which is sold separately.

1 2

1 Song number indicator

Shows the number of the song playing.

2 Play time indicator

3 Text information

1 Press SOURCE to select the iPod.

While connected to this unit, PIONEER (or

(check mark)) is displayed on the iPod.

# Pressing CD/DVD can also select iPod.

2 To perform fast forward or reverse,

hold the thumb pad left or right.

3 To skip back or forward to another

track, move the thumb pad left or right.

Moving the thumb pad right skips to the start

of the next song. Moving it left once skips to

the start of the current song. Moving it left

again will skip to the previous song.

Notes

! If an error message is displayed, refer to the

interface adapter for iPod owner’s manual.

! When the ignition switch is set to ACC or ON,

the iPod’s battery is charged while the iPod is

connected to this unit.

! While the iPod is connected to this unit, the

iPod cannot be turned on or off.

! Before connecting the dock connector to the

iPod, disconnect the headphones.

! The iPod is turned off about two minutes after

the ignition switch is set to OFF.

Browsing for a song

Operations to control an iPod with this unit is

designed to be as close to the iPod to make

operation and song search easy.

! If the characters recorded on the iPod are

not compatible with this unit, those charac-

ters will not be displayed.

1 Move the thumb pad up or down to se-

lect a category.

Moving the thumb pad up or down selects the

category in the following order:

PLAYLIST (playlists)—ARTIST (artists)—

ALBUM (albums)—SONG (songs)—GENRE

(genres)

List for the selected category is displayed.

2 Move the thumb pad right to deter-

mine the category.

List for the selected category is displayed.

# You can start playback throughout the se-

lected category by holding the thumb pad right.

3 Move the thumb pad up or down to se-

lect a playlist, song list, album list, artist list

or genre list from the lists.

Moving the thumb pad up or down switches

the list.

4 Move the thumb pad right to deter-

mine the list.

Lists for the selected list are displayed.

5 Repeat steps 3 and 4 to find a song you

want to listen to.

# When you selected GENRE, ARTIST, ALBUM

or SONG, you can start playback throughout the

selected list. To do this, hold the thumb pad right.

# To return to the previous group of list titles,

move the thumb pad left.

# To return to the category select display, hold

the thumb pad left.

Selecting a playlist

You can select a playlist from your iPod.

! If the characters recorded on the iPod are

not compatible with this unit, those charac-

ters will not be displayed.

Available accessories

Section

Available accessories

! If playlist has been selected, first, this unit

shows playlist of your iPod’s name. This

plays all the songs in your iPod.

% Move the thumb pad up or down to se-

lect a playlist.

# Playlist name is displayed for four seconds.

# If no songs have been stored in the playlist,

STOP is displayed and playback stops.

Displaying text information on

iPod

% Press DISPLAY to select the desired text

information.

Track number, play time and song title—track

number, play time and artist name—track

number, play time and album title

# If the characters recorded on the iPod are not

compatible with this unit, those characters will

not be displayed.

Note

You can scroll the text information to the left by

pressing and holding DISPLAY.

Function control

1 Function control screen

Shows the function names and status.

1 Click and hold the thumb pad to display

the function control screen.

2 Press FUNC 1 to FUNC 6 to control the

desired function.

FUNC 1: Press to control repeat play. (Repeat-

ing play on this page)

FUNC 2: Press to control shuffle play. (Playing

songs in a random order (shuffle) on this page)

FUNC 3: Press to control pause. (Pausing a

song on the next page)

FUNC 6: Press to control the display indica-

tion. (Switching the display on the next page)

3 Click and hold the thumb pad to exit

the function control screen.

Repeating play

For playback of the songs on the iPod, there

are two repeat play ranges: REPEAT ONE (re-

peat one song) and REPEAT ALL (repeat all

songs in the list).

! While REPEAT is set to REPEAT ONE, you

cannot select other songs.

% Press FUNC 1 on the function control

screen.

Pressing FUNC 1 repeatedly will turn repeat

play on or off.

Press FUNC 1 repeatedly until the desired set-

ting appears in the display.

! REPEAT ONE – Repeat the current song

! REPEAT ALL – Repeat all songs in the se-

lected list

Playing songs in a random

order (shuffle)

For playback of songs on the iPod, there are

two random play methods: SHUFFLE SONGS

(play back songs in a random order) and

SHUFFLE ALBUMS (play back albums in a

random order).

% Press FUNC 2 on the function control

screen.

Press FUNC 2 repeatedly until the desired set-

ting appears in the display.

! SHUFFLE SONGS – Play back songs in the

selected list in random order.

! SHUFFLE ALBUMS – Play back songs from

a randomly selected album in order.

! SHUFFLE OFF – Cancel random play

Available accessories

Section

Pausing a song

% Press FUNC 3 on the function control

screen.

Pressing FUNC 3 repeatedly will turn pause on

or off.

Switching the display

Display indication can be selected between

normal playback screen and simple screen.

When simple screen is selected, only the song

number is displayed.

% Press FUNC 6 on the function control

screen.

Pressing FUNC 6 repeatedly will switch the

display indication.

Multi-CD Player

Basic Operations

You can use this unit to control a multi-CD

player, which is sold separately.

! Only functions described in this manual are

supported by 50-disc multi-CD players.

! This unit is not designed to operate disc title

list functions with a 50-disc multi-CD player.

For information about the disc title list func-

tions, refer to Selecting discs from the disc

title list on the next page.

1 2

1 Disc number indicator

Shows the number of the disc playing.

2 Track number indicator

Shows the number of the track playing.

3 Text information

4 Play time indicator

1 Press SOURCE to select the Multi CD.

# Pressing CD/DVD can also select Multi CD.

2 Move the thumb pad up or down to se-

lect a desired disc.

3 To perform fast forward or reverse,

hold the thumb pad left or right.

4 To skip back or forward to another

track, move the thumb pad left or right.

Notes

! When multi-CD player completes preparatory

operations, Ready is displayed.

! If an error message such as ERROR-11 is dis-

played, refer to the multi-CD player owner’s

manual.

! If there are no discs in the multi-CD player ma-

gazine, NO DISC is displayed.

Available accessories

Section

Available accessories

Function control

1 Function control screen

Shows the function names and status.

1 Click and hold the thumb pad to display

the function control screen.

2 Press FUNC 1 to FUNC 6 to control the

desired function.

FUNC 1: Press to select the repeat play range.

(Selecting a repeat play range on this page)

FUNC 2: Press to control random play. (Playing

tracks in random order on this page)

FUNC 3: Press to control scan play. (Scanning

CDs and tracks on this page)

FUNC 4: Press to control pause. (Pausing disc

playback on this page)

FUNC 5: Press to display the disc title list

screen. (Selecting discs from the disc title list

on this page)

FUNC 6: Press to control the display indica-

tion. (Switching the display on the next page)

3 Click and hold the thumb pad to exit

the function control screen.

Selecting a repeat play range

Repeat play plays the selected play range re-

peatedly.

Also, the repeat range determines the range of

random play and scan play.

% Press FUNC 1 on the function control

screen.

Press FUNC 1 repeatedly until the desired set-

ting appears in the display.

! MCD – Repeat all discs in the multi-CD

player

! D.REPEAT – Repeat the current disc

! REPEAT – Repeat just the current track

Playing tracks in random order

Tracks in a selected repeat range are played in

random order.

Refer to Selecting a repeat play range on this

page.

% Press FUNC 2 on the function control

screen.

Pressing FUNC 2 repeatedly will turn random

play on or off.

Scanning CDs and tracks

Scan play searches the song or disc within the

selected repeat range.

Refer to Selecting a repeat play range on this

page.

1 Press FUNC 3 on the function control

screen.

Pressing FUNC 3 repeatedly will turn scan

play on or off.

The first 10 seconds of each track of the cur-

rent disc (or the first track of each disc) are

played.

# After scanning is finished, normal playback of

the tracks will begin.

2 When you find the desired track (or

disc) press FUNC 3 to turn scan play off.

The track (or disc) will continue to play.

Pausing disc playback

% Press FUNC 4 on the function control

screen.

Pressing FUNC 4 repeatedly will turn pause on

or off.

Selecting discs from the disc

title list

Disc title list lets you see the list of disc titles

entered into the multi-CD player and select

one of them to play back.

Available accessories

Section

1 Press FUNC 5 on the function control

screen.

Disc title list screen is displayed.

2 Move the thumb pad left or right to se-

lect a desired disc.

# If no title has been entered for a disc,

No D.Title will be displayed.

# NO DISC is displayed next to the disc number

when there is no disc in the magazine.

3 Move the thumb pad up to determine

the list.

4 Press RETURN to switch to the function

control screen.

Switching the display

Display indication can be selected between

normal playback screen and simple screen.

When simple screen is selected, only the disc

number and track number are displayed.

% Press FUNC 6 on the function control

screen.

Pressing FUNC 6 repeatedly will switch the

display indication.

Selecting a disc directly

1 Press SHIFT on the function control

screen.

Disc direct select screen is displayed.

2 Press FUNC 1 to FUNC 6 to select the de-

sired disc number DISC 1 to DISC 6.

To select a disc stored in DISC 7 to DISC12,

press SHIFT again to switch the disc direct

screen. And then, press FUNC 1 to FUNC 6 to

select a desired disc.

3 Press RETURN to switch to the function

control screen.

The track for the entered number will play.

Using disc title functions

You can input CD titles and display the title.

The next time you insert a CD for which you

have entered a title, the title of that CD will be

displayed.

Entering disc titles

Use the disc title input feature to store up to

48 CD titles in the unit. Each title can be up to

20 characters long.

1 Play the CD that you want to enter a

title for.

2 Click and hold the thumb pad to display

the function control screen.

3 Press and hold SHIFT on the function

control screen.

Disc title edit screen is displayed.

4 Press FUNC 1 or FUNC 2 to select the

character type.

FUNC 1: Alphabet, numbers and symbols

FUNC 2: Numbers and symbols

5 Move the thumb pad up or down to se-

lect a letter of the alphabet.

6 Move the thumb pad left or right to

move the cursor to the previous or next

character position.

7 If you have completed entering the disc

title, press FUNC 5 to store in memory.

8 Press RETURN to switch to the function

control screen.

# Pressing FUNC 6 also switches to the function

control screen.

Notes

! Titles remain in the memory even after the

disc has been removed from the magazine,

and are recalled when the disc is reinserted.

! After data for 48 discs have been stored in the

memory, data for a new disc will overwrite the

oldest one.

Available accessories

Section

Available accessories

Displaying text information on

disc

! You can use this function only when CD

TEXT disc is playing.

% Press DISPLAY to select the desired text

information.

Play time and disc title—play time and disc ar-

tist name—play time and track title—play time

and track artist name

Notes

! You can scroll to the left of the title by pressing

and holding DISPLAY.

! If specific information has not been recorded

on a disc, title or name is not displayed.

DVD Player

Basic Operations

You can use this unit to control a DVD player or

multi-DVD player, which is sold separately.

! Multi-DVD player that has disc title func-

tions can also be connected to this unit. In

this case, disc title list and disc title input

can be controlled.

1 Disc number indicator

Shows the number of the disc currently play-

ing when using a multi-DVD player.

2 Title/Folder number indicator

Shows the title (when playing DVD video) or

folder (when playing compressed audio) of

the selection currently playing.

3 Chapter/track number indicator

Shows the chapter (when playing DVD video)

or track (when playing Video CD, CD or com-

pressed audio) currently playing.

4 Play time indicator

1 Press SOURCE to select the DVD.

# Pressing CD/DVD can also select DVD.

2 To perform fast forward or reverse,

hold the thumb pad left or right.

3 To skip back or forward to another

chapter/track, move the thumb pad left or

right.

Selecting a folder

! You can operate this function only when a

DVD player compatible with compressed

audio playback is connected to this unit.

% Move the thumb pad up or down to se-

lect a folder.

Available accessories

Section

Function control

1 Function control screen

Shows the function names and status.

1 Click and hold the thumb pad to display

the function control screen.

2 Press FUNC 1 to FUNC 6 to control the

desired function.

FUNC 1: Press to select the repeat play range.

(Selecting a repeat play range on this page)

FUNC 2: Press to control random play. (Playing

tracks in random order on this page)

FUNC 3: Press to control scan play. (Scanning

folders and tracks on this page)

FUNC 4: Press to control pause. (Pausing disc

playback on this page)

FUNC 6: Press to control the display indica-

tion. (Switching the display on the next page)

3 Click and hold the thumb pad to exit

the function control screen.

Selecting a repeat play range

Tracks in a play range are played repeatedly.

Play range varies depending on the media.

Also, the repeat range determines the range of

random play and scan play.

% Press FUNC 1 on the function control

screen.

Press FUNC 1 repeatedly until the desired set-

ting appears in the display.

! DISC – Repeat the current disc

! REPEAT – Repeat the current track

! TITLE – Repeat the current title

! CHAPTER – Repeat the current chapter

Playing tracks in random order

Tracks in a selected repeat range are played in

random order.

Refer to Selecting a repeat play range on this

page.

! This function is available for CD and com-

pressed audio disc.

% Press FUNC 2 on the function control

screen.

Pressing FUNC 2 repeatedly will turn random

play on or off.

Scanning folders and tracks

Scan play searches the song or disc within the

selected repeat range.

Refer to Selecting a repeat play range on this

page.

! This function is available for CD and com-

pressed audio disc.

1 Press FUNC 3 on the function control

screen.

Pressing FUNC 3 repeatedly will turn scan

play on or off.

The first 10 seconds of each track of the cur-

rent disc (or the first track of each disc) are

played.

# After scanning is finished, normal playback of

the tracks will begin.

2 When you find the desired track (or

disc) press FUNC 3 to turn scan play off.

The track (or disc) will continue to play.

Pausing disc playback

% Press FUNC 4 on the function control

screen.

Pressing FUNC 4 repeatedly will turn pause on

or off.

Available accessories

Section

Available accessories

Switching the display

Display indication can be selected between

normal playback screen and simple screen.

When simple screen is selected, only the disc

and title/track numbers are displayed.

% Press FUNC 6 on the function control

screen.

Pressing FUNC 6 repeatedly will switch the

display indication.

Selecting a disc directly

1 Press SHIFT on the function control

screen.

Disc direct select screen is displayed.

2 Press FUNC 1 to FUNC 6 to select the de-

sired disc number DISC 1 to DISC 6.

3 Press RETURN.

The track for the entered number will play.

Using disc title functions

You can input CD titles and display the title.

The next time you insert a CD for which you

have entered a title, the title of that CD will be

displayed.

! This function is available for CD.

Entering disc titles

Use the disc title input feature to store up to

48 CD titles in the unit. Each title can be up to

20 characters long.

1 Play the CD that you want to enter a

title for.

2 Click and hold the thumb pad to display

the function control screen.

3 Press and hold SHIFT on the function

control screen.

Disc title edit screen is displayed.

4 Press FUNC 1 or FUNC 2 to select the

character type.

FUNC 1: Alphabet, numbers and symbols

FUNC 2: Numbers and symbols

5 Move the thumb pad up or down to se-

lect a letter of the alphabet.

6 Move the thumb pad left or right to

move the cursor to the previous or next

character position.

7 If you have completed entering the disc

title, press FUNC 5 to store in memory.

8 Press RETURN to switch to the function

control screen.

# Pressing FUNC 6 also switches to the function

control screen.

Notes

! Titles remain in the memory even after the

disc has been removed from the magazine,

and are recalled when the disc is reinserted.

! After data for 48 discs have been stored in the

memory, data for a new disc will overwrite the

oldest one.

Available accessories

Section

TV tuner

Basic Operations

You can use this unit to control a TV tuner,

which is sold separately.

1 2

1 Band indicator

2 Preset number indicator

3 Channel indicator

1 Press SOURCE to select the TV.

# Pressing TV can also select TV.

2 Press BAND to select a band.

Press BAND until the desired band (TV1 or

TV2) is displayed.

3 To perform manual tuning, move the

thumb pad left or right.

4 To perform seek tuning, hold the

thumb pad left or right for about one sec-

ond and release.

The tuner will scan the channels until a broad-

cast strong enough for good reception is

found.

# You can cancel seek tuning by moving the

thumb pad left or right.

# If you hold the thumb pad left or right, you

can skip broadcasting channels. Seek tuning

starts as soon as you release the thumb pad.

Function control

1 Function control screen

Shows the function names and status.

1 Click and hold the thumb pad to display

the function control screen.

2 Press and hold FUNC 1 to control the

function.

FUNC 1: Press and hold to control BSSM (best

stations sequential memory). (Storing the

strongest broadcast stations sequentially on

this page)

3 Click and hold the thumb pad to exit

the function control screen.

Storing the strongest broadcast

stations sequentially

% Press and hold FUNC 1 on the function

control screen.

BSSM begins to flash. While BSSM is flashing

the 6 strongest broadcast stations will be

stored in order from the lowest channel up.

When finished, BSSM stops flashing.

# To cancel the storage process, press FUNC 1

again.

Note

Storing broadcast stations with BSSM may re-

place broadcast stations you have saved using

FUNC 1 to FUNC 6.

Available accessories

Section

Available accessories

Storing and recalling broadcast

stations

You can easily store up to 6 broadcast stations

for later recall.

! Up to 12 stations, 6 for each of the two TV

bands, can be stored in memory.

Switching to the preset tuning screen

% Press SHIFT on the function control

screen.

Preset tuning screen is displayed.

# Press RETURN to switch to the function con-

trol screen.

Storing presets

% Press and hold FUNC 1 to FUNC 6 on the

preset tuning screen.

The broadcast station is stored in memory that

corresponds to FUNC 1 to FUNC 6.

Recalling presets

% Press FUNC 1 to FUNC 6 on the preset

tuning screen.

The broadcast station that corresponds to

FUNC 1 to FUNC 6 is tuned in.

# Moving the thumb pad up or down also recalls

the preset station.

Auxiliary (AUX) devices

Basic Operations

Up to five auxiliary devices can be connected to

this unit. Name for each auxiliary device can be

changed.

! Auxiliary devices connected to this unit can

be activated or deactivated individually. For

details, refer to Switching the auxiliary set-

ting on page 11.

! This unit can control five devices as AUX

sources. The following devices can be con-

nected to this unit.

— Devices with RCA output; This unit con-

trols them as AUX1 Main or

AUX2 AUX.

If the device you want to connect as an

AUX unit does not have an RCA output,

supplied speaker-RCA conversion cable

can be used. In this case, the connected

device is controlled as AUX1 Main or

AUX2 AUX.

— Devices with digital output; This unit

controls it as AUX3 Digital.

— Devices with 3.5 mm mini plug; This unit

controls it as AUX4 MiniPlug.

— Devices with Pioneer IP-BUS; This unit

controls it as AUX5 IP-BUS.

Device connected with IP-BUS-RCA inter-

connector is controlled as AUX5 IP-BUS.

% Press SOURCE to select the AUX1 Main,

AUX2 AUX, AUX3 Digital, AUX4 MiniPlug

or AUX5 IP-BUS.

# Pressing AUX/EXT can also select

AUX1 Main, AUX2 AUX, AUX3 Digital,

AUX4 MiniPlug or AUX5 IP-BUS.

Available accessories

Section

Editing the auxiliary (AUX)

device name

The name displayed for the AUX1 Main,

AUX2 AUX, AUX3 Digital, AUX4 MiniPlug

and AUX5 IP-BUS source can be edited.

! The animated source name displayed when

the source is selected cannot be changed.

1 Select an AUX source that you want to

edit a name for.

Press SOURCE to select any of AUX1 Main,

AUX2 AUX, AUX3 Digital, AUX4 MiniPlug or

AUX5 IP-BUS.

# If the auxiliary setting is not turned on,

AUX1 Main, AUX2 AUX, AUX3 Digital,

AUX4 MiniPlug or AUX5 IP-BUS cannot be se-

lected. For more details, see Switching the auxili-

ary setting on page 11.

2 Click and hold the thumb pad to display

the function control screen.

3 Press and hold SHIFT on the function

control screen.

Name edit screen is displayed.

4 Press FUNC 1 or FUNC 2 to select the

character type.

FUNC 1: Alphabet, numbers and symbols

FUNC 2: Numbers and symbols

5 Move the thumb pad up or down to se-

lect a letter of the alphabet.

6 Move the thumb pad left or right to

move the cursor to the previous or next

character position.

7 If you have completed entering the

auxiliary (AUX) device name, press FUNC 5

to store in memory.

8 Press RETURN to switch to the function

control screen.

# Pressing FUNC 6 also switches to the function

control screen.

Available accessories

Section

Available accessories

Controlling the audio

processor

This unit can control Pioneer Audio Processor

(e.g. RS-A9, RS-P90 or DEQ-P90) as an audio

unit. For details about audio functions, please

refer to the combined audio unit’s owner’s

manual. In this regard, some operations de-

scribed on these owner’s manuals are differ-

ent from this unit’s operation. This is caused

by the difference of remote control. Please see

the following chart and operate the audio unit.

Operations conversion chart

Audio unit This unit

a Move the thumb pad up

b Move the thumb pad down

c Move the thumb pad left

d Move the thumb pad right

Open the cover Click and hold the thumb pad

Close the cover Click and hold the thumb pad

Notes

! Audio unit adjustment requires technical

skills and knowledge of the automobile sound

system, acoustic field, amplifier characteris-

tics and speaker characteristics. If adjust-

ments are difficult or sound is unsatisfactory,

please contact an authorized Pioneer dealer.

! When adjustments have already been made at

your dealer, the optimum setup for the vehi-

cle’s particular interior has been installed in

the memory. In this case, recall the corre-

sponding memory for use. For details, refer to

the audio unit’s owner’s manual.

Differentia of the audio

function

Following functions are different from the

functions described in the audio processor’s

operation manual.

! When using source level adjustment (SLA)

function, volume level for each source is

set as follows:

— Multi-CD player, CD and AUX3 are set to

the same volume adjustment automati-

cally.

— AUX2, AUX5, external unit 1 and exter-

nal unit 2 are set to the same volume ad-

justment automatically.

— Discrete volume adjustment can be set

to television, DVD, iPod, AUX1 and

AUX4.

! Up to four audio settings can be stored in

memory.

— When using this unit with RS-A9 or RS-

P90 :

two base memories, two custom mem-

ories and a last memory can be used.

— When using this unit with DEQ-P90:

four memories can be used.

! Audio setting of AUX1 Main can be stored

in the custom memory 1 independently.

! Memory protection can be used only for

the base memory.

— Memory protection can be used only

when RS-A9 or RS-P90 is used with this

unit. DEQ-P90 doesn’t have this

function.

Audio unit control

Section

Other Functions

Sound muting

Sound from this unit is muted automatically in

the following cases:

! When a call is made or received using a

cellular telephone connected to this unit.

! When the voice guidance is output from a

Pioneer navigation unit connected to this

unit.

The sound is turned off, MUTE is displayed

and no audio adjustments are possible. Opera-

tion returns to normal when the phone con-

nection or the voice guidance is ended.

Switching the display indication

Display indication can be switched on or off.

To reduce noise, it is effective to switch off the

display indication.

% Press and hold DISPLAY OFF.

Pressing and holding DISPLAY OFF switches

the display indication on or off.

# While the display indication is turned off, dis-

play off indicator lights up.

# Even if the display indication is turned off, op-

eration can be conducted. If operation is con-

ducted while the display indication is off, display

will light up for a few seconds and then turn off

again.

Other Functions

Section

Other Functions

Important

! This unit can not be installed in a vehicle that

does not have an ACC (accessory) position on

the ignition switch.

ACC position No ACC position

! Use of this unit in conditions other than the

following could result in fire or malfunction.

— Vehicles with a 12-volt batter y and negative

grounding.

! To prevent a short-circuit, overheating or mal-

function, be sure to follow the directions

below.

— Disconnect the negative terminal of the

battery before installation.

— Secure the wiring with cable clamps or ad-

hesive tape. To protect the wiring, wrap ad-

hesive tape around them where they lie

against metal parts.

— Place all cables away from moving parts,

such as gear shift and seat rails.

— Place all cables away from hot places,

such as near the heater outlet.

— Do not pass the battery cable (translucent

with yellow stripe) through a hole into the

engine compartment to connect to a bat-

tery.

— Cover any disconnected cable connectors

with insulating tape.

— Do not shorten any cables.

— Never cut the insulation of the power cable

of this unit in order to share the power

with other devices. Current capacity of the

cable is limited.

— Use a fuse of the rating prescribed.

! Refer to the owner’s manual for details on

connecting the power amp and other units,

then make connections correctly.

! IP-BUS connectors are color-coded. Be sure

to connect connectors of the same color.

Cord function may differ according to the pro-

duct, even if cord color is the same. When con-

necting this system, be sure to check all

manuals and connect cords correctly.

Connections

Section

Connecting the power cable

Translucent with black stripe

(chassis ground)

Connect to a clean, paint-free

metal location.

Fuse (4 A)

Translucent with yellow stripe

Connect to the constant

12 V supply terminal.

Red

Connect to terminal controlled

by ignition switch (12 V DC).

ellow/black

If you use a device with a Mute function, connect

this lead to the Audio Mute lead on that device.

If not, keep the Audio Mute lead free of any connections.

Blue/white

Connect to system control

terminal of the power amp

(max. 300 mA 12 V DC).

Orange/white

Connect to lighting switch terminal.

Fuse resistor

This unit

Covering

! Cover the back-up terminal and ground

terminal of the hide-away unit with the sup-

plied covering.

Connections

Section

Connections

Connecting the audio processor

This unit

Tweeter

Mid-range

Low-range

Subwoofer

Power amplifier

(e.g. PRS-A500) (sold separately)

Power amplifier

(e.g. PRS-A500) (sold separately)

Power amplifier

(e.g. PRS-A700) (sold separately)

Audio processor

(e.g. DEQ-P90) (sold separately)

Black

Blue

IP-BUS cable

Optical cable

RCA cable

(sold separately)

RCA cable

(sold separately)

! This illustration is a connection example.

For details concerning connection with

your audio processor, refer to audio proces-

sor’s owner’s manual or contact your

Pioneer dealer.

Connections

Section

Connecting the Pioneer IP-BUS devices

This unit

Display unit

Optical cable

Black

Hide-away TV tuner

(e.g. GEX-P5700TV)

(sold separately)

Multi-DVD player

(e.g. XDV-P6)

(sold separately)

iPod adapter

(e.g. CD-IB100II)

(sold separately)

Remote control sensor

IP-BUS cable

Blue

Black

IP-BUS cable

Blue

Black

Multi-CD Player

(sold separately)

Blue

25 pin cable

Blue

Display unit

extension cable

Connections

Section

Connections

Connecting the AUX devices

AUX 4 unit

(mini-plug-equipped unit)

(sold separately)

IP-BUS-RCA interconnector

(CD-RB10/CD-RB20) (sold separately)

AUX 5 unit

(RCA-output-equipped unit)

(sold separately)

AUX 3 unit

(optical-output-equipped unit)

(sold separately)

AUX 2 unit

(RCA-output-equipped unit)

(sold separately)

AUX 1 unit

(RCA-output-equipped unit)

(sold separately)

RCA cable

(sold separately)

TOSLINK digital cable

(sold separately)

COAXIAL (75 Ω) digital cable

(sold separately)

RCA cable

(sold separately)

mini plug (3.5 mm) cable

(sold separately)

Blue



! If the device you want to connect does not

have an RCA output, the supplied speaker-

RCA conversion cable can be used. For de-

tails, refer to Using the speaker-RCA conver-

sion cable on the next page.

* Select COAX-input or TOSLINK-input de-

pending on the connected device’s digital

output.

Connections

Section

Selecting the input setting

switch

Depending on the AUX devices connected to

this unit, select the input setting switch on the

under side of this unit.

1 Input level select switch (AUX1 Main)

Input level of AUX1 can be selected between

HIGH and LOW. If amplifier equipped unit is

connected to AUX1, select this switch to

HIGH.

2 Input level select switch (AUX2 AUX)

Input level of AUX2 can be selected between

HIGH and LOW. If amplifier equipped unit is

connected to AUX2, select this switch to

HIGH.

3 Digital input select switch (AUX3 Digital)

Depending on the AUX3 unit, select COAX.

(COAX digital cable) or OPT. (TOSLINK digital

cable).

4 Mixing setting switch

Sound from AUX1 Main and AUX2 AUX can

be mixed by selecting this switch.

Using the speaker-RCA

conversion cable

If the device you want to connect as an AUX

unit does not have an RCA output, the sup-

plied speaker-RCA conversion cable can be

used.

* If you want to connect the device to this

unit as AUX 1 or AUX 2, connect to AUX 1

or AUX 2 input. If IP-BUS-RCA interconnec-

tor is used, it is also possible to connect

the device as AUX 5.

AUX device

(speaker-output-equipped unit)

(sold separately)

Speaker output

Speaker-RCA

conversion cable

(supplied)

White:

Left 

Black:

Left 

Black:

Right 

Red:

Right 

To RCA input of this unit.



Connections

Section

Connections

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Install the unit where it will not get in the dri-

ver’s way and will not injure passengers if

there is a sudden stop.

! When mounting this unit, make sure none of

the leads are trapped between this unit and

the surrounding metalwork or fittings.

! Do not mount this unit near heater outlets

where it would be affected by heat, or near the

doors where rainwater might splash onto it.

! Before drilling any mounting holes, always

check behind where you want to drill the

holes. Do not drill into the gas line, brake line,

electrical wiring or other important parts.

! If this unit is installed in the passenger com-

partment, anchor it securely so it does not

break free while the vehicle is moving, caus-

ing injury or an accident.

! If this unit is installed under the front seat,

make sure it does not obstruct seat move-

ment. Route all leads and cords carefully

around the sliding mechanism so they do are

not caught or pinched in the mechanism and

cause a short-circuit.

Installing the hide-away unit

1 Attach the mounting brackets to the

hide-away unit.

1 Hide-away unit

2 Screw (4 mm × 8 mm)

3 Mounting bracket

2 Install the hide-away unit in the car.

1 Hide-away unit

2 Tapping screw (4 mm × 12 mm)

3 Drill a hole of 2 mm to 2.5 mm

4 Car mat or chassis

Installation

Section

Installing the display unit

Important

! Do not install the display unit where:

— it may interfere with operation of the safety

devices of the vehicle such as airbags.

— it may interfere with operation of the vehi-

cle such as steering wheel and gearshift.

— it may obstruct the driver’s view.

Otherwise, a fatal accident may result.

! Do not mount the display unit on a moving

part such as visor.

! Do not mount the display unit on the ceiling.

! Do not mount the display unit on an unstable

part.

There are four methods to install the display

unit.

! Installing with hook and loop fasteners

! Installing with double-sided tape

! Installing with mounting base

! Installing with flush mounting bracket

Installing with hook and loop

fasteners

Thoroughly wipe off the surface before affixing

the hook and loop fasteners.

1 Affix the hook and loop fastener

(rough surface) to the display unit.

1 Display unit

2 Hook and loop fastener (rough surface)

2 Affix the hook and loop fastener (soft

surface) to dashboard or console.

1 Dashboard or console

2 Hook and loop fastener (soft surface)

3 Attach the display unit.

1 Dashboard or console

2 Display unit

4 Route the display cable.

Secure the display cable so that it will not in-

terfere with operation of the vehicle.

Installing with double-sided tape

Thoroughly wipe off the surface before affixing

the double-sided tape.

Installation

Section

Installation

1 Affix the double-sided tape to the dis-

play unit.

1 Display unit

2 Double-sided tape

2 Attach the display unit.

1 Dashboard or console

2 Display unit

3 Route the display cable.

Secure the display cable so that it will not in-

terfere with operation of the vehicle.

Installing with mounting base

Thoroughly wipe off the surface before affixing

the double-sided tape.

1 Attach the mounting base to the dis-

play unit.

1 Hexagonal head screw (2.6 mm × 6 mm)

2 Mounting base

3 Flat washer

4 Display unit

2 Decide where to place the display unit.

1 Dashboard or console

2 Place to install

Installation

Section

3 Fix the display unit with the screw and

the double-sided tape.

1 Screw

2 Drill a hole of 1.5 mm

# Display unit and the mounting base should be

horizontal at this step. Otherwise, fixing with

screw is impossible.

4 Adjust the angle of the display unit.

1 Display unit

2 Hexagonal wrench

5 Route the display cable.

Secure the display cable so that it will not in-

terfere with operation of the vehicle.

Mounting with flush mounting

bracket

Thoroughly wipe off the surface before affixing

the double-sided tape.

Important

This installation method requires specialized

knowledge and skills. For the sake of safety, be

sure to consult your dealer about installation.

1 Detach the dashboard or console panel

where you want to install the display unit.

2 Make a hole in the dashboard or con-

sole as illustrated.

To make a hole, use a cut paper stenci l printed

on the contain box.

1 Dashboard or console

2 Cut paper stencil

# If the size of the hole is too big, the display

unit may be accidentally detached. In this case, a

traffic accident or injury may result.

# Before drilling any mounting holes, always

check behind where you want to drill the holes.

Do not drill into the gas line, brake line, electrical

wiring or other important parts.

3 Affix the double-sided tape along the

periphery of the behind of the mounting

bracket.

1 Double-sided tape

2 Mounting bracket

Installation

Section

Installation

4 Attach the display unit and mounting

bracket with the supplied screws.

1 Display unit

2 Mounting bracket

3 Screw (2.6 mm × 5 mm)

5 Bend the metal bands as illustrated.

Bend the metal bands to fit the place where

you want to install the display unit.

1 Metal band

# The metal bands are stiff. To bend the metal

bands, we recommend that you use pliers or vise.

6 Affix the double-sided tape to both

ends of the metal bands.

1 Metal band

2 Double-sided tape

7 Apply the display unit to the dashboard

or console panel.

1 Dashboard or console

2 Display unit

8 Attach the mounting bracket and metal

bands with the supplied screws.

! Make sure that the display unit is firmly

seated.

1 Screw (3 mm × 12 mm)

2 Metal band

3 Dashboard or console

4 Mounting bracket

9 Route the display cable.

Secure the display cable so that it will not in-

terfere with operation of the vehicle.

# To protect the display cable, wrap protection

tape around it where they lie against metal parts.

10 Fix the dashboard or console panel to

the original place.

Installation

Section

Installing the steering

remote control

Before installing the steering

remote control

WARNING

! Secure all cables so that they do not interfere

with operation of the vehicle. Otherwise, ser-

ious danger may result.

! Do not install the steering remote control

where:

— it may interfere with operation of the safety

devices of the vehicle such as airbags.

— it may interfere with operation of the vehi-

cle such as steering wheel and gearshift.

Otherwise, a fatal accident may result.

! If installation requires removal of the steering

wheel, be sure to consult your dealer. Wrong

installation or connection may result in fatal

accident.

CAUTION

! Depending on the type of the vehicle, the

steering remote control cannot be installed.

! Installation of the steering remote control re-

quires specialized knowledge and skills. Be

sure to consult your dealer about installation.

! Follow the instructions in this manual to in-

stall the steering remote control.

! Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

! Do not mount the steering remote control

near the doors where rainwater might splash

onto it.

! Use optional clamps to secure the cable

where necessary inside the vehicle.

Handling guidelines for the

steering remote control

! Replace the battery when the steering re-

mote control’s performance deteriorates.

! Do not install the steering remote control

in place that may obstruct the driver’s view.

Installing the steering remote

control

! When the steering remote control is in-

stalled on a right-hand-drive car, the hori-

zontal positions are inverted.

1 Decide where to place the steering re-

mote control.

1 Steering remote control

2 Attach the steering remote control be-

hind the steering wheel.

1 Steering remote control

2 Double-sided tape

Installation

Section

Installation

3 Decide where to place the battery box.

1 Battery box

4 Route the steering remote control

cable.

! If cables are too long, put the cables in the

groove on the surface of the battery box.

5 Attach the battery box to the underside

of the steering wheel.

! For your convenience, attach the battery

box so that the battery tray is pointed to-

wards the driver’s side.

1 Double-sided tape

2 Battery box

6 Secure the steering remote cables with

protection sheets.

1 Protection sheet

7 Attach the remote control sensor to the

underside of the steering column cover.

! Check that there are no objects between

the battery box and the remote control sen-

sor.

1 Steering remote control

2 Battery box

3 Remote control sensor

8 Route the remote control sensor cable.

! Secure the cable so that it will not interfere

with operation of the vehicle.

Installation

Section

Troubleshooting

Common

Symptom Cause Action (See)

Power doesn’t turn on.

The unit doesn’t operate.

Leads and connectors are incor-

rectly connected.

Confirm once more that all connections are

correct.

The fuse is blown. Rectify the reason for the fuse blowing, then

replace the fuse. Be very sure to install a fuse

with the same rating.

Noise and other factors are causing

the built-in microprocessor to oper-

ate incorrectly.

Turn the unit off and then on.

Operation with the remote con-

trol isn’t possible.

The unit does not operate cor-

rectly even when the appropriate

remote cont rol buttons are

pressed.

Battery power is low. Load new battery. (Page 4)

No sounds are heard.

The volume level will not rise.

Cables are not connected correctly. Connect the cables correctly.

There is no sound.

Volume level is low.

The volume level is low. Adjust the volume level.

The attenuator is on. Turn the attenuator off.

Additional Information

Appendix

Additional Information

Specifications

General

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system ................... Negative type

Max. current consumption

..................................................... 1.0 A

Display unit:

Dimensions (W × H × D)

........................................... 165 × 44 × 16.4 mm

Weight ................................ 0.13 kg

Hideaway unit:

Dimensions (W × H × D)

........................................... 252 × 40 × 152 mm

Weight ................................ 1.5 kg

Audio

Input

Analogue

Line ............................. 1.5 V

Speaker (AUX1, AUX2)

................................. 10 V

Digital

LPCM ......................... 44.1 kHz to 96 kHz

Output

Digital

LPCM ......................... 44.1 kHz

Note

Specifications and the design are subject to mod-

ifications without notice due to improvements.

Additional Information

Appendix

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU

TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundar y Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada

TEL: 1-877-283-5901

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

先鋒股份有限公司

總公司 : 台北市中山北路二段44號13樓

電話 : (02) 2521-3588

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心

9樓901-6室

電話 : (0852) 2848-6488

Published by Pioneer Corporation.

Printed in Japan

<CRB2420-A> EW

Pioneer AXM-P90RS Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer AXM-P90RS

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info