649251
62
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
62
You can only update the firmware when the vehicle is
stopped and the handbrake is engaged.
1 Download the firmware update files into your
computer.
2 Connect a blank (formatted) storage device
to your computer, and then locate the correct
update file and copy it onto the storage device.
3 Set the external storage device to this product.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
4 Turn the source off.
Refer to Selecting a source on page 9
5 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
Follow the on-screen instructions to finish updating the
firmware.
p
If an error message appears on the screen, touch the display
and perform the above steps again.
Checking sensor learning status
and driving status
You can check the sensor learning status, such as the degree of
learning. You can also check the current sensor values and the
total number of speed pulses.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [System Information].
3 Touch [3D Calibration Status].
Clearing the status
You can delete the learned results stored in the sensor.
1 Display the “3D Calibration Status” screen.
2 Touch [Distance] or [Speed Pulse], and then
touch [Yes].
3 Touch [Learning] and then touch [Reset All].
p Touch [Reset All] to reset the sensor after changing the
installation position or angle.
p
If you touch [Reset Distance], all learned results stored in
Distance” are cleared.
Checking the connections of
leads
Check that the leads are properly connected between this
product and vehicle.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
58
2 Touch [System Information].
3 Touch [Connection Status].
GPS Antenna
Displays the connection status of the GPS aerial (“OK” or
NOK”) and the reception sensitivity.
p
If reception is poor, please change the installation position
of the GPS aerial.
Positioning Status
Displays the positioning status (3D positioning, 2D posi-
tioning, or no positioning), the number of satellites used for
positioning (orange), and the number of satellites whose
signal has been received (yellow). If signals from more than
three satellites are received, the current location can be
measured.
Refer to Positioning technology on page 75
Installation
Indicates whether the installation position of this product
is correct or not. If installed correctly, “OK” appears. When
this product is installed at an extreme angle exceeding
the limitation of the installing angle, “NOK(Inst. Angle)
will be displayed. If the installation of this product is
continually changed and it is not firmly fixed into place,
NOK(Vibration)” will be displayed.
Speed Pulse
The speed pulse value detected by this product is shown.
Illumination
Displays the status of headlights or small lamps of the
vehicle.
Back Signal
When the gearstick is shifted to “R” (reverse position), the
signal switches to “High” or “Low”. The signal displayed will
vary depending on the vehicle.
Vehicle Bus(*1)
Displays the status of the vehicle bus adapter.
p
(*1) F88DAB/F80DAB/F980DAB/F9880DAB
< CRB4818-B >
System settings
62

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-AVIC-F980DAB

Zoeken resetten

  • navigatie opstarten lukt niet. Blijft hangen bij licentie, kan niet scrollen en niet akkoord geven. Gesteld op 16-9-2017 om 19:59

    Reageer op deze vraag Misbruik melden
  • Graag verneem ik ook de oplossing van bovenstaand probleem. Wij blijven ook "hangen" op dit gedeelte.
    Geantwoord op 18-7-2018 om 21:43

    Waardeer dit antwoord Misbruik melden
  • Heb de pioneer avic f950ab diva dab. Nu is de accu eraf geweest en heb ik een wachtwoord nodig en die heb ik niet. Wat kan ik doen?
    Tips of iets mag u ook mailen bloem1970@hotmail.com Gesteld op 7-6-2017 om 18:19

    Reageer op deze vraag Misbruik melden
  • Mijn garage heeft het opgelost. Is gaan zoeken op Internet naar programmaatje die het kon ontcijferen. Verder kan ik er niets over vertellen. Geantwoord op 15-4-2019 om 21:23

    Waardeer dit antwoord Misbruik melden
  • hoe kan ik de stem wijzigen van het navigatiesysteem Gesteld op 22-5-2017 om 12:35

    Reageer op deze vraag Misbruik melden
    • Ik heb hetzelfde probleem, ik wil de stem ook wijzigen van het navigatiesysteem.
      Weet je toevallig al hoe dat moet en zou je dit ook aan mij kunnen uitleggen?
      Kan per mail op: jg.kampen@kpnmail.nl
      Alvast hartelijk dank.
      Groet.
      Gerard
      Geantwoord op 6-12-2017 om 13:46

      Waardeer dit antwoord (35) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer AVIC-F980DAB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer AVIC-F980DAB in de taal/talen: Engels als bijlage per email.

De handleiding is 16,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer AVIC-F980DAB

Pioneer AVIC-F980DAB Installatiehandleiding - Nederlands - 204 pagina's

Pioneer AVIC-F980DAB Gebruiksaanwijzing - Nederlands - 91 pagina's

Pioneer AVIC-F980DAB Installatiehandleiding - Deutsch - 204 pagina's

Pioneer AVIC-F980DAB Gebruiksaanwijzing - Deutsch - 95 pagina's

Pioneer AVIC-F980DAB Installatiehandleiding - English, Français - 204 pagina's

Pioneer AVIC-F980DAB Gebruiksaanwijzing - Français - 93 pagina's

Pioneer AVIC-F980DAB Installatiehandleiding - Italiano, Espanõl - 204 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info