Notes:
• Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
• When using a subwoofer of 70 W (2 Ω) , be sure to connect with
Violet and Violet/black leads of this unit. Do not connect
anything to Green and Green/black leads.
Dock connector
Connect to separately sold iPod.
Interface cable (e.g., CD-IU205V)
(sold separately)
80 cm
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
• The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that piece of equipment. If not, keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the parking brake. This
lead must be connected to the power supply side of the parking
brake switch.
Blue/white
Connect to system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (7*)
Connect to auto-antenna relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO
connector will differ depending
on the type of vehicle. Connect
6* and 7* when Pin 5 is an
antenna control type. In other
types of vehicles, never connect
6* and 7*.
Blue/white (6*)
Ground side
Power supply side
Parking brake
switch
IP-BUS input
(Blue)
IP-BUS cable
Tuner box (supplied)
Multi-CD player
(sold separately)
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
Antenna cable
(supplied)
80 cm
