Handleiding Pioneer AVH-280BT (pagina 43 van 45) (Engels)

649351

Verklein

Vergroot

Pagina terug

1/45

Pagina verder

Owner’s Manual

AVH-280BT

AVH-180DVD

DVD RDS AV RECEIVER

RÉCEPTEUR A/V RDS DVD

RADIO AV RDS CON DVD

English

1< QRD3356-A >

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and

convenience, be sure to record this number on the enclosed warranty card

English

Installation using the screw holes on the side of

this product ...............................................36

Installing the microphone ...............................36

Mounting on the sun visor ..............................36

Installation on the steering column.................37

Adjusting the microphone angle.....................37

■Appendix..........................37

Troubleshooting .............................................37

Error messages .............................................38

Handling and care of discs.............................39

Playable discs ................................................40

Detailed information for playable media .........40

Bluetooth .......................................................43

WMA..............................................................43

DivX ...............................................................43

AAC ...............................................................43

Detailed information regarding connected iPod

devices

......................................................43

Using app-based connected content..............44

Notice regarding video viewing ......................44

Notice regarding DVD-Video viewing .............44

Notice regarding MP3 le usage ....................44

Using the LCD screen correctly......................44

Specications.................................................45

Thank you for buying this Pioneer product.

Please read through these instructions so you

will know how to operate your model properly.

After you have finished reading the instruc-

tions, keep this document in a safe place for

future reference.

Important

The screens shown in the examples may

differ from actual screens, which may be

changed without notice for performance and

function improvements.

■Precaution ..........................4

Information to User ..........................................4

License, Warranty Disclaimer & Limitation of

Liability

........................................................5

Important safety information ............................5

Parking brake interlock .....................................5

When using a display connected to V OUT ......6

To avoid battery exhaustion ..............................6

Rear view camera ............................................6

Handling the USB connector ............................6

Failure to operate .............................................6

Visit our website ...............................................6

Protecting the LCD panel and screen...............6

Notes on internal memory

................................6

About this manual ............................................7

■Basic operation ..................7

Checking part names and functions .................7

Remote control ................................................7

Inserting/ejecting/connecting media.................7

On rst-time startup

.........................................7

How to use the screens ....................................9

Supported AV source .....................................10

Selecting a source .........................................10

Using the touch panel ....................................10

■Registration and

connection of Bluetooth

device ...............................11

Displaying the “Bluetooth” screen ...................11

Registering your Bluetooth devices ................11

Connecting a registered Bluetooth device

manually ...................................................11

Switching visibility ..........................................11

Entering the PIN code for Bluetooth wireless

connection

................................................11

Displaying the device information ...................11

Clearing the Bluetooth memory......................11

Updating Bluetooth software

..........................12

Displaying the Bluetooth software version ......12

■ Hands-free phoning .........12

Displaying the Phone menu screen ................12

Making a phone call .......................................12

Receiving a phone call ...................................13

Changing the phone settings .........................13

Notes for hands-free phoning .........................13

■ Setup for iPod ..................14

iPod compatibility ...........................................14

Information on the connections and

functions

...................................................14

■ Radio ................................15

Starting procedure .........................................15

Storing the strongest broadcast

frequencies

...............................................15

Tuning into strong frequencies .......................15

■ Disc ...................................16

Starting procedure .........................................17

Selecting les from the le name list ..............17

Switching the media le type ..........................17

Searching for the part you want to play ..........17

Operating the DVD menu ...............................17

Switching the subtitle/audio language ............17

■ Compressed audio

les ...................................18

Starting procedure (for Disc) ..........................18

Starting procedure (for USB) ..........................18

Selecting les from the le name list ..............18

Switching the media le type ..........................18

■ Compressed video

les ...................................19

Starting procedure .........................................19

Selecting les from the le name list ..............19

■Stillimageles ................20

Starting procedure .........................................20

Selecting les from the le name list ..............20

Switching the media le type ..........................20

Setting the slideshow interval .........................20

■iPod ..................................21

Connecting your iPod .....................................21

Starting procedure .........................................22

Selecting song or video sources from the

playlist screen

...........................................22

■ Bluetooth audio player ....22

Starting procedure .........................................22

Selecting les from the le name list ..............22

■AUX source ......................23

Starting procedure .........................................23

Setting the video signal ..................................23

■System settings ...............23

Displaying the “System” setting screen ..........23

Activating the Bluetooth audio source ............23

Setting the ever scroll .....................................23

Setting the rear view camera ..........................23

Setting the camera for Rear View mode .........24

Selecting the system language ......................24

Setting the beep sound ..................................24

Adjusting the response positions of the touch

panel (touch panel calibration)

..................24

Setting the dimmer .........................................24

Adjusting the picture ......................................25

■Audio adjustments ..........26

Displaying the “Audio” setting screen .............26

Using fader/balance adjustment .....................26

Using balance adjustment

..............................26

djusting source levels ..................................26

Adjusting loudness .........................................26

Using the subwoofer output............................26

Adjusting the subwoofer settings

....................26

Switching the rear speaker output ..................26

Switching the RCA rear output .......................26

Boosting the bass ..........................................27

Setting the high pass lter ..............................27

Using the equalizer ........................................27

■Theme menu ....................27

Selecting the theme color ...............................27

■ Setting up the video

player ................................28

Setting the top-priority languages ..................28

Setting the angle icon display .........................28

Setting parental lock ......................................28

Setting the DivX Subtitle ................................29

Displaying your DivX VOD registration

code

..........................................................29

Displaying your DivX VOD deregistration

code

..........................................................29

Automatic playback of DVDs ..........................29

Setting the video signal for the rear view

camera

......................................................29

■Favorite menu ..................30

Creating a shortcut ........................................30

Selecting a shortcut .......................................30

Removing a shortcut ......................................30

■Common operations ........30

Setting the time and date ...............................30

Changing the wide screen mode ....................30

■ Other functions ................31

Resetting various settings/Restoring this

product to the default settings ...................31

■ Connection .......................31

Precautions ....................................................31

Precautions before connecting the system .....31

Before installing this product ..........................32

To prevent damage ........................................32

Notice for the blue/white lead .........................32

This product ...................................................32

Power cord .....................................................33

Speaker leads ................................................33

Power amp (sold separately) ..........................34

iPod / iPhone ..................................................34

iPod / iPhone with Lightning connector ..........34

iPod / iPhone with 30-pin connector ...............34

Camera ..........................................................34

External video component and the display .....35

■Installation .......................36

Precautions before installation .......................36

Before installing .............................................36

Installation notes ............................................36

2 < QRD3356-A >< QRD3356-A >

Contents

Installation using the screw holes on the side of

this product ...............................................36

Installing the microphone ...............................36

Mounting on the sun visor ..............................36

Installation on the steering column .................37

Adjusting the microphone angle .....................37

■Appendix ..........................37

Troubleshooting .............................................37

Error messages .............................................38

Handling and care of discs .............................39

Playable discs ................................................40

Detailed information for playable media .........40

Bluetooth .......................................................43

WMA ..............................................................43

DivX ...............................................................43

AAC ...............................................................43

Detailed information regarding connected iPod

devices

......................................................43

Using app-based connected content ..............44

Notice regarding video viewing ......................44

Notice regarding DVD-Video viewing .............44

Notice regarding MP3 le usage ....................44

Using the LCD screen correctly ......................44

Specications.................................................45

■Setting up the video

player................................28

Setting the top-priority languages ..................28

Setting the angle icon display.........................28

Setting parental lock ......................................28

Setting the DivX Subtitle ................................29

Displaying your DivX VOD registration

code

..........................................................29

Displaying your DivX VOD deregistration

code

..........................................................29

Automatic playback of DVDs ..........................29

Setting the video signal for the rear view

camera

......................................................29

■Favorite menu..................30

Creating a shortcut ........................................30

Selecting a shortcut .......................................30

Removing a shortcut ......................................30

■Common operations........30

Setting the time and date ...............................30

Changing the wide screen mode....................30

■Other functions................31

Resetting various settings/Restoring this

product to the default settings ...................31

■Connection.......................31

Precautions....................................................31

Precautions before connecting the system.....31

Before installing this product..........................32

To prevent damage ........................................32

Notice for the blue/white lead .........................32

This product ...................................................32

Power cord.....................................................33

Speaker leads................................................33

Power amp (sold separately)..........................34

iPod / iPhone..................................................34

iPod / iPhone with Lightning connector ..........34

iPod / iPhone with 30-pin connector ...............34

Camera..........................................................34

External video component and the display.....35

■Installation .......................36

Precautions before installation.......................36

Before installing .............................................36

Installation notes............................................36

3< QRD3356-A >

Contents

BE SURE TO OBSERVE THE FOLLOWING

GUIDELINES:

 Do not turn up the volume so high that you can’t hear what’s

around you.

 Use caution or temporarily discontinue use in potentially

hazardous situations.

 Do not use headphones while operating a motorized vehicle;

the use of headphones may create a traffic hazard and is

illegal in many areas.

License, Warranty Disclaimer &

Limitation of Liability

SAFETY PROVISIONS

Disclaimer

THE WARRANTIES SET FORTH IN PIONEER’S LIMITED

WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER

OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER

AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE.

Limitation of Liability

TO THE MAXIMUM EXTENT PERMISSIBLE UNDER

APPLICABLE LAW, NEITHER PIONEER NOR ITS LICENSORS

WILL BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR

ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE,

OR SPECIAL DAMAGES, REGARDLESS OF THE FORM OF

ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING

NEGLIGENCE, EVEN IF SUCH PARTIES HAVE BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE

LAW, PIONEER’S, OR ITS LICENSORS’, TOTAL LIABILITY OF

ANY KIND ARISING OUT OF OR RELATED TO YOUR USE

OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO,

ANY WARRANTY CLAIMS, OR ANY CLAIMS FOR PROPERTY

DAMAGE, DEATH OR DISABILITY, REGARDLESS OF THE

FORUM AND REGARDLESS OF WHETHER ANY ACTION

OR CLAIM IS BASED ON CONTRACT, TORT, (INCLUDING

NEGLIGENCE), STRICT PRODUCT LIABILITY, OR ANY OTHER

LEGAL THEORY, WILL NOT EXCEED ONE THOUSAND DOLLARS

(USD$1 000).

Information to User

 MODEL NO. : AVH-280BT

Contains FCC ID : AJDK083

Contains/Contient IC : 775E-K083



This device complies with Part 15 of FCC Rules and

Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device

must accept any interference, including interference that

may cause undesired operation of this device.



The Bluetooth antenna cannot be removed (or replaced)

by user.

 This equipment complies with FCC/IC radiation exposure

limits set forth for an uncontrolled environment and

meets the FCC radio frequency (RF) Exposure Guidelines

and RSS-102 of the IC radio frequency (RF) Exposure

rules. This equipment has very low levels of RF energy

that it deemed to comply without maximum permissive

exposure evaluation (MPE). But it is desirable that it

should be installed and operated keeping the radiator at

least 20 cm or more away from person’s body (excluding

extremities: hands, wrists, feet and ankles).

 This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.



Alteration or modifications carried out without

appropriate authorization may invalidate the user’s right

to operate the equipment.



NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:



Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician

for help.

CAUTION:

USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT

WILL INCREASE EYE HAZARD.

CAUTION

This product is a Class 1 laser product classified under the

Safety of laser products, IEC 60825-1:2007, and contains a

class 1M laser module. To ensure continued safety, do not

remove any covers or attempt to gain access to the inside of

the product. Refer all servicing to qualified personnel.

CAUTION—CLASS 1M VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN, DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

WARNING

This product contains chemicals known to the State of

California and other governmental entities to cause cancer

and birth defects or other reproductive harm. Wash hands

after handling.

The Safety of Your Ears is in Your

Hands

Get the most out of your equipment by playing it at a safe level—

a level that lets the sound come through clearly without annoy-

ing blaring or distortion and, most importantly, without affecting

your sensitive hearing. Sound can be deceiving. Over time, your

hearing “comfort level” adapts to higher volumes of sound, so

what sounds “normal” can actually be loud and harmful to your

hearing. Guard against this by setting your equipment at a safe

level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

 Set your volume control at a low setting.

 Slowly increase the sound until you can hear it comfortably

and clearly, without distortion.

 Once you have established a comfortable sound level, set

the dial and leave it there.

Precaution

4 < QRD3356-A >< QRD3356-A >

Precaution Precaution

BE SURE TO OBSERVE THE FOLLOWING

GUIDELINES:

 Do not turn up the volume so high that you can’t hear what’s

around you.

 Use caution or temporarily discontinue use in potentially

hazardous situations.

 Do not use headphones while operating a motorized vehicle;

the use of headphones may create a traffic hazard and is

illegal in many areas.

License, Warranty Disclaimer &

Limitation of Liability

SAFETY PROVISIONS

Disclaimer

THE WARRANTIES SET FORTH IN PIONEER’S LIMITED

WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER

OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER

AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE.

Limitation of Liability

TO THE MAXIMUM EXTENT PERMISSIBLE UNDER

APPLICABLE LAW, NEITHER PIONEER NOR ITS LICENSORS

WILL BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR

ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE,

OR SPECIAL DAMAGES, REGARDLESS OF THE FORM OF

ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING

NEGLIGENCE, EVEN IF SUCH PARTIES HAVE BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE

LAW, PIONEER’S, OR ITS LICENSORS’, TOTAL LIABILITY OF

ANY KIND ARISING OUT OF OR RELATED TO YOUR USE

OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO,

ANY WARRANTY CLAIMS, OR ANY CLAIMS FOR PROPERTY

DAMAGE, DEATH OR DISABILITY, REGARDLESS OF THE

FORUM AND REGARDLESS OF WHETHER ANY ACTION

OR CLAIM IS BASED ON CONTRACT, TORT, (INCLUDING

NEGLIGENCE), STRICT PRODUCT LIABILITY, OR ANY OTHER

LEGAL THEORY, WILL NOT EXCEED ONE THOUSAND DOLLARS

(USD$1 000).

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION

OF DAMAGES OR LIMITATION OF LIABILITY, SO THE ABOVE

EXCLUSIONS OR LIMITATIONS, TO THE EXTENT PROHIBITED

BY APPLICABLE LAW, MAY NOT APPLY TO YOU. YOUR SPECIFIC

RIGHTS MAY VARY FROM JURISDICTION TO JURISDICTION.

Important safety information

WARNING

 Do not attempt to install or service this product by yourself.

Installation or servicing of this product by persons without

training and experience in electronic equipment and

automotive accessories may be dangerous and could

expose you to the risk of electric shock, injury or other

hazards.



Do not allow this product to come into contact with liquids.

Electrical shock could result. Also, damage to the product,

smoke, and overheating could result from contact with

liquids.



If liquid or foreign matter should get inside this product,

park your vehicle in a safe place, turn the ignition switch

off (ACC OFF) immediately and consult your dealer or the

nearest authorized Pioneer Service Station. Do not use this

product in this condition because doing so may result in a

fire, electric shock, or other failure.



If you notice smoke, a strange noise or odor from this

product, or any other abnormal signs on the LCD screen,

turn off the power immediately and consult your dealer or

the nearest authorized Pioneer Service Station. Using this

product in this condition may result in permanent damage

to the system.



Do not disassemble or modify this product, as there

are high-voltage components inside which may cause

an electric shock. Be sure to consult your dealer or the

nearest authorized Pioneer Service Station for internal

inspection, adjustments or repairs.

Before using this product, be sure to read and fully understand

the following safety information:



Do not operate this product, any applications, or the rear

view camera option (if purchased) if doing so will divert your

attention in any way from the safe operation of your vehicle.

Always observe safe driving rules and follow all existing

traffic regulations. If you experience difficulty in operating

this product or reading the display, park your vehicle in a

safe location and apply the parking brake before making the

necessary adjustments.



Never set the volume of this product so high that you cannot

hear outside traffic and emergency vehicles.

 To promote safety, certain functions are disabled unless the

vehicle is stopped and/or the parking brake is applied.

 Keep this manual handy as a reference for operating proce-

dures and safety information.



Do not install this product where it may (i) obstruct the

driver’s vision, (ii) impair the performance of any of the

vehicle’s operating systems or safety features, including air

bags or hazard lamp buttons or (iii) impair the driver’s ability

to safely operate the vehicle.



Please remember to fasten your seat belt at all times while

operating your vehicle. If you are ever in an accident, your

injuries can be considerably more severe if your seat belt is

not properly buckled.



Never use headphones while driving.

Parking brake interlock

Certain functions (such as viewing of video image and certain

touch panel key operations) offered by this product could be

dangerous (possibly resulting in serious injury or death) and/

or unlawful if used while driving. To prevent such functions from

being used while the vehicle is in motion, there is an interlock

system that senses when the parking brake is set and when the

vehicle is moving. If you attempt to use the functions described

above while driving, they will become disabled until you stop

the vehicle in a safe place, and (1) apply the parking brake, (2)

release the parking brake, and then (3) apply the parking brake

again. Please keep the brake pedal pushed down before releas-

ing the parking brake.

To ensure safe driving

WARNING

 LIGHT GREEN LEAD AT POWER CONNECTOR

IS DESIGNED TO DETECT PARKED STATUS

AND MUST BE CONNECTED TO THE POWER

SUPPLY SIDE OF THE PARKING BRAKE SWITCH.

IMPROPER CONNECTION OR USE OF THIS LEAD

MAY VIOLATE APPLICABLE LAW AND MAY RESULT

IN SERIOUS INJURY OR DAMAGE.



Do not take any steps to tamper with or disable the

parking brake interlock system which is in place for

your protection. Tampering with or disabling the

parking brake interlock system could result in serious

injury or death.



To avoid the risk of damage and injury and the

potential violation of applicable laws, this product is

not for use with a video image that is visible to the

CAUTION

This product is a Class 1 laser product classified under the

Safety of laser products, IEC 60825-1:2007, and contains a

class 1M laser module. To ensure continued safety, do not

remove any covers or attempt to gain access to the inside of

the product. Refer all servicing to qualified personnel.

CAUTION—CLASS 1M VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN, DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

WARNING

This product contains chemicals known to the State of

California and other governmental entities to cause cancer

and birth defects or other reproductive harm. Wash hands

after handling.

The Safety of Your Ears is in Your

Hands

Get the most out of your equipment by playing it at a safe level—

a level that lets the sound come through clearly without annoy-

ing blaring or distortion and, most importantly, without affecting

your sensitive hearing. Sound can be deceiving. Over time, your

hearing “comfort level” adapts to higher volumes of sound, so

what sounds “normal” can actually be loud and harmful to your

hearing. Guard against this by setting your equipment at a safe

level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

 Set your volume control at a low setting.

 Slowly increase the sound until you can hear it comfortably

and clearly, without distortion.

 Once you have established a comfortable sound level, set

the dial and leave it there.

5< QRD3356-A >

Precaution Precaution

 Checking part names and functions on page 7

Settings and recorded contents are reset to the factory settings.

About this manual

This manual uses diagrams of actual screens to describe opera-

tions. However, the screens on some units may not match those

shown in this manual depending on the model used.

Meanings of Symbols Used in This

Manual

000BT

This indicates model name that are supported

the described operations.

This indicates to touch an appropriate soft key

on the touch screen.

HOLD

This indicates to touch and hold an appropriate

soft key on the touch screen.

This indicates that there is a reference or

supplementary for the key or screen.

driver.

 In some countries the viewing of video image on a display

inside a vehicle even by persons other than the driver may

be illegal. Where such regulations apply, they must be

obeyed.

If you attempt to watch video image while driving, the warning

“Viewing of front seat video source while driving is strictly

prohibited.” will appear on the screen. To watch video image

on this display, stop the vehicle in a safe place and apply the

parking brake. Please keep the brake pedal pushed down before

releasing the parking brake.

When using a display con-

nected to V OUT

The video output terminal (V OUT) is for connection of a display

to enable passengers in the rear seats to watch video images.

WARNING

NEVER install the rear display in a location that enables the

driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using

this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an

ACC wire or circuitry available.

Rear view camera

With an optional rear view camera, you are able to use this

product as an aid to keep an eye on trailers, or backing into a

tight parking spot.

WARNING

 SCREEN IMAGE MAY APPEAR REVERSED.

 USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE

REAR VIEW CAMERA. OTHER USE MAY RESULT IN

INJURY OR DAMAGE.

CAUTION

The rear view mode is to use this product as an aid to keep

an eye on the trailers, or while backing up. Do not use this

function for entertainment purposes.

Handling the USB connector

CAUTION

 To prevent data loss and damage to the storage device,

never remove it from this product while data is being

transferred.



Pioneer cannot guarantee compatibility with all USB mass

storage devices and assumes no responsibility for any loss

of data on media players, iPhone, smartphone, or other

devices while using this product.

Failure to operate

After-sales service for Pioneer products

Please contact the dealer or distributor from which you

purchased the product for after-sales service (including

warranty conditions) or any other information. In case the

necessary information is not available, please contact the

companies listed below.

Please do not ship your product to the companies at the

addresses listed below for repair without making advance

contact.



USA&CANADA

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. Box 1760 Long Beach, CA 90801-1760

800-421-1404

For warranty information, please see the Limited Warranty

sheet included with your product.

Visit our website

Visit us at the following site:

http://www.pioneerelectronics.com

http://www.pioneerelectronics.ca

1 Register your product.

2 Receive updates on the latest products and technologies.

3 Download owner’s manuals, order product catalogs,

research new products, and much more.

4 Receive notices of software upgrades and software updates.

Protecting the LCD panel and

screen

 Do not expose the LCD screen to direct sunlight when this

product is not used. This may result in LCD screen malfunc-

tion due to the resulting high temperatures.



When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption

of the video in the form of spots, colored stripes, etc.



To protect the LCD screen from damage, be sure to touch the

touch panel keys only with your finger and do so gently.

Notes on internal memory

Before removing the vehicle battery

 Some of the settings and recorded contents will not be reset.

Data subject to erasure

The information is erased by disconnecting the yellow lead from

the battery (or removing the battery itself).



Some of the settings and recorded contents will not be reset.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded

contents to the factory settings.



Do not perform this operation when a device is connected

to this product.

 Some of the settings and recorded contents will not be

reset.

The microprocessor must be reset under the following

conditions:



Prior to using this product for the first time after installation.

 If this product fails to operate properly.

 If there appears to be problems with the operation of the

system.

 If your vehicle position is shown on the map with a signifi-

cant positioning error.

1 Turn the ignition switch OFF.

2 Press the RESET button with a pen tip or other

pointed implement.

6 < QRD3356-A >< QRD3356-A >

Precaution Precaution

 Checking part names and functions on page 7

Settings and recorded contents are reset to the factory settings.

About this manual

This manual uses diagrams of actual screens to describe opera-

tions. However, the screens on some units may not match those

shown in this manual depending on the model used.

Meanings of Symbols Used in This

Manual

000BT

This indicates model name that are supported

the described operations.

This indicates to touch an appropriate soft key

on the touch screen.

HOLD

This indicates to touch and hold an appropriate

soft key on the touch screen.

This indicates that there is a reference or

supplementary for the key or screen.

Checking part names and

functions

87 9

1 RESET

button

 Resetting the microprocessor on page 6

2 Volume (+/–) button

3 MUTE

button

Press to switch the mute setting to on or off.

button

Press to switch the display between the top

menu screen and the current source screen.

5 DISP

button

Press to turn the display on or off.

TRK (

/ )

button

Performs manual seek tuning, fast forward,

reverse and track search controls.

Press to answer or end a call.

button

8 Disc-

slot



Inserting and ejecting a disc on page 7

9 LCD screen

Remote control

The remote control CD-R33 is sold separately.

For details concerning operations, see the remote control

manual.

Inserting/ejecting/connecting

media

CAUTION

Do not insert anything other than a disc into the disc-loading

slot.

Inserting and ejecting a disc

Inserting a disc

1 Insert a disc into the disc-loading slot.

Ejecting a disc

1 Press button to eject a disc.

Plugging and unplugging a USB stor-

age device

p This product may not achieve optimum performance with

some USB storage devices.

p Connection via a USB hub is not possible.

p A USB cable is required for connection.

1 Pull out the plug from the USB port of the USB

cable.

2 Plug a USB storage device into the USB cable.

1 USB cable

2 USB storage device

Check that no data is being accessed before pulling out the

USB storage device.

On rst-time startup

1 Start the engine to boot up the system.

Basic operation

Protecting the LCD panel and

screen

 Do not expose the LCD screen to direct sunlight when this

product is not used. This may result in LCD screen malfunc-

tion due to the resulting high temperatures.



When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption

of the video in the form of spots, colored stripes, etc.



To protect the LCD screen from damage, be sure to touch the

touch panel keys only with your finger and do so gently.

Notes on internal memory

Before removing the vehicle battery

 Some of the settings and recorded contents will not be reset.

Data subject to erasure

The information is erased by disconnecting the yellow lead from

the battery (or removing the battery itself).



Some of the settings and recorded contents will not be reset.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded

contents to the factory settings.



Do not perform this operation when a device is connected

to this product.

 Some of the settings and recorded contents will not be

reset.

The microprocessor must be reset under the following

conditions:



Prior to using this product for the first time after installation.

 If this product fails to operate properly.

 If there appears to be problems with the operation of the

system.

 If your vehicle position is shown on the map with a signifi-

cant positioning error.

1 Turn the ignition switch OFF.

2 Press the RESET button with a pen tip or other

pointed implement.

7< QRD3356-A >

Precaution Precaution Basic operation

How to use the screens

4821

6/10

Radio

Disc

iPodRadio

Phone Book

abcdefghi

ABC

System

Bluetooth

Audio

Rear View

AUXOFF

Month/Date

12hour 24hour

10 620162148

Time Format

d/m/y m/d/y

Top menu screen

Time and date setting screen

Setting menu screen

Phone menu screen

AV source icons

Current source

By pressing the button on any screen you can display the Top menu screen.

After a short pause, the splash screen comes on for a few

seconds.

The “Select Program Language” screen appears.

From the second time on, the screen shown will differ

depending on the previous conditions.

2 Touch the language that you want to use on

screen.

3 Touch

The top menu screen appears.

8 < QRD3356-A >< QRD3356-A >

Basic operation Basic operation

How to use the screens

4821

6/10

Radio

Disc

iPodRadio

Phone Book

abcdefghi

ABC

System

Bluetooth

Audio

Rear View

AUXOFF

Month/Date

12hour 24hour

10 620162148

Time Format

d/m/y m/d/y

Top menu screen

Time and date setting screen

Setting menu screen

Phone menu screen

AV source icons

Current source

By pressing the button on any screen you can display the Top menu screen.

9< QRD3356-A >

Basic operation Basic operation

280BT

Displaying the “Bluetooth”

screen

1 Press .

2 Touch

, and then .

The “Bluetooth” screen appears.

Registering your Bluetooth

devices

p If three devices are already paired, “Memory Full” is dis-

played. Delete a paired device first.



Deleting a registered device on page 11

1 Activate the Bluetooth wireless technology on

your devices.

2 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

3 Touch [Connection].

4 Touch

The system searches for Bluetooth devices waiting for a connec-

tion and displays them in the list if a device is found.

5 Touch the Bluetooth device name you want to

p If your device supports SSP (Secure Simple Pairing), a six-

digit number appears on the display of this product. Touch

[Yes] to pair the device.

Once the connection is established, the device name is

displayed. Touch the device name to disconnect.

After the device is successfully registered, a Bluetooth con-

nection is established from the system.

The Bluetooth connection can be also made by detecting

this product from the Bluetooth device. Before registration,

make sure that “Visibility” in the “Bluetooth” menu is set

to “On”. For details on a Bluetooth device operations, refer

to the operating instructions supplied with the Bluetooth

device.



Switching visibility on page 11

Registration and connection of Bluetooth device

Supported AV source

You can play or use the following sources with this product.

 Radio

 CD

 ROM (compressed audio files)

 DVD-Video

The following sources can be played back or used by connecting

an auxiliary device.



USB

 iPod

 Bluetooth audio (AVH-280BT)

 AUX

Selecting a source

Source on the Top menu screen

1 Press .

2 Touch the source icon you want to select.

p When you select “OFF”, the AV source is turned off.

Source on the source list

1 Display the source list.

4821

󰖃Track 99

9999’99” -9999’99”

Pause

6/10



1 Displays the source list.

2 Touch the source key you want to select.

p When you select “OFF”, the AV source is turned off.

Using the touch panel

You can operate this product by touching the keys on the screen

directly with your fingers.

To protect the LCD screen from damage, be sure to touch the

screen only with your finger gently.

Using the common touch panel keys

 : Returns to the previous screen.



: Closes the screen.

Operating list screens

ROOT

abcdefghi

1 Touching an item on the list allows you to narrow down the

options and proceed to the next operation.

2 Appears when all characters are not displayed on the display

area.

If you touch the key, the rest are scrolled for display.

Appears when items cannot be displayed on a single page.

Touch

or to view any hidden items.

Operating the time bar

9999’99” -9999’99”

1 You can change the playback point by dragging the key.

p This function is not available when the Bluetooth Audio is

selected as the AV source.

Switching the operation panel

1 : Switches the operation panel of AV

sources.

This key is not available on all sources.

10 < QRD3356-A >< QRD3356-A >

Basic operation Registration and connection of Bluetooth device

280BT

Displaying the “Bluetooth”

screen

1 Press .

2 Touch

, and then .

The “Bluetooth” screen appears.

Registering your Bluetooth

devices

p If three devices are already paired, “Memory Full” is dis-

played. Delete a paired device first.



Deleting a registered device on page 11

1 Activate the Bluetooth wireless technology on

your devices.

2 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

3 Touch [Connection].

4 Touch

The system searches for Bluetooth devices waiting for a connec-

tion and displays them in the list if a device is found.

5 Touch the Bluetooth device name you want to

p If your device supports SSP (Secure Simple Pairing), a six-

digit number appears on the display of this product. Touch

[Yes] to pair the device.

Once the connection is established, the device name is

displayed. Touch the device name to disconnect.

After the device is successfully registered, a Bluetooth con-

nection is established from the system.

The Bluetooth connection can be also made by detecting

this product from the Bluetooth device. Before registration,

make sure that “Visibility” in the “Bluetooth” menu is set

to “On”. For details on a Bluetooth device operations, refer

to the operating instructions supplied with the Bluetooth

device.



Switching visibility on page 11

Connecting to a Bluetooth device

automatically

This function connects the last connected Bluetooth device to

this product automatically as soon as the two devices are less

than a few meters apart.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Auto Connect] to switch “On” (default)

or “Off”.

Deleting a registered device

CAUTION

Never turn this product off while the paired Bluetooth device

is being deleted.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Connection].

3 Touch

Connecting a registered

Bluetooth device manually

Connect the Bluetooth device manually in the following cases:

 Two or more Bluetooth devices are registered, and you want

to manually select the device to be used.

 You want to reconnect a disconnected Bluetooth device.

 Connection cannot be established automatically for some

reason.

1 Activate the Bluetooth wireless technology on

your devices.

2 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

3 Touch [Connection].

4 Touch the name of the device that you want to

connect.

Switching visibility

This function sets whether or not to make this product visible to

the other device.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Visibility] to switch “On” (default) or

“Off”.

Entering the PIN code for

Bluetooth wireless connection

To connect your Bluetooth device to this product, you need to

enter a PIN code.

You can change the PIN code with this function.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [PIN Code Input].

3 Touch [0] to [9] to input the pin code (up to

8 -digits).

4 Touch

p The default PIN code is “0000”.

Displaying the device

information

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Device Information].

The device name and address of the Bluetooth device and this

product are displayed.

Clearing the Bluetooth memory

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

CAUTION

Never turn this product off while the Bluetooth memory is

being cleared.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

Registration and connection of Bluetooth device

Switching the operation panel

1 : Switches the operation panel of AV

sources.

This key is not available on all sources.

11< QRD3356-A >

Basic operation Registration and connection of Bluetooth device

2 Touch .

3 Touch the item to switch the history list.

The following items are available:



: Received call list



: Dialed call list



: Missed call list

4 Touch the desired entry on the list to make a

call.

The dial screen appears and dialing starts.

5 Touch to end the call.

Using the preset dial lists

Registering a phone number

You can easily store up to six phone numbers per device as

presets.

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch or .

On the “Phone Book” screen, touch the desired name.

3 Touch .

Dialing from the preset dial list

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch .

3 Touch the desired item you want to dial.

The dial screen appears and dialing starts.

Receiving a phone call

1 Touch to answer the call.

 If you touch

while getting a call waiting, you

can switch to the talking person.

 Touch

to reject the call.

2 Touch

to end the call.

2 Touch [Bluetooth Memory Clear].

3 Touch [Clear].

The confirmation screen appears.

Updating Bluetooth software

This function is used to update this product with the latest

Bluetooth software. For details on Bluetooth software and updat-

ing, refer to our website.

The source is turned off and the Bluetooth connection is

disconnected before the process starts.

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

p You need to store the version up file to the USB storage

device in advance.

CAUTION

Never turn this product off and never disconnect the phone

while the software is being updated.

1 Connect the USB storage device stored the ver-

sion update file to this unit.

 Plugging and unplugging a USB storage device on page 7

2 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

3 Touch [BT Software Update].

4 Touch [Start].

Follow the on-screen instructions to finish updating the

Bluetooth software.

Displaying the Bluetooth soft-

ware version

If this product fails to operate properly, you may need to consult

your dealer for repair.

In such cases, perform the following procedure to check the

software version on this unit.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [BT Version Info].

The version of this product’s Bluetooth module appears.

280BT

Phone Book

abcdefghi

ABC

Bluetooth telephone

connected indicator

Reception status of

the cellular phone

The device number of the

connected device is displayed.

Battery status of

the cellular phone

Switches to the initial search.

Displays the preset dial screen.

 Using the preset dial lists on page 13

Switches to the phone book list.

 Calling a number in the phone book on page 12

Switches to the missed, received and dialed call lists.

 Dialing from the history on page 12

Switches the mode to enter the phone number

directly.

 Direct dialing on page 12

CAUTION

For your safety, avoid talking on the phone as much as

possible while driving.

To use this function you need to connect your cellular phone to

this product via Bluetooth in advance.



Registration and connection of Bluetooth device on page 11

Displaying the Phone menu

screen

1 Press .

2 Touch

The Phone menu screen appears.

Making a phone call

You can make a phone call in many different ways.

Direct dialing

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch .

3 Touch the number keys to enter the phone

number.

4 Touch

to make a call.

5 Touch

to end the call.

p You may hear a noise when you hang up the phone.

Calling a number in the phone book

p The contacts on your phone will be automatically transferred

to this product.

p “Visibility” of the “Bluetooth” screen should be on.

 Switching visibility on page 11

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch .

3 Touch the desired name on the list.

4 Touch the phone number you want to dial.

The dial screen appears and dialing starts.

5 Touch to end the call.

Dialing from the history

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

Hands-free phoning

12 < QRD3356-A >< QRD3356-A >

Registration and

connection of

Bluetooth device

Hands-free phoning Hands-free phoning

2 Touch .

3 Touch the item to switch the history list.

The following items are available:



: Received call list



: Dialed call list



: Missed call list

4 Touch the desired entry on the list to make a

call.

The dial screen appears and dialing starts.

5 Touch to end the call.

Using the preset dial lists

Registering a phone number

You can easily store up to six phone numbers per device as

presets.

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch or .

On the “Phone Book” screen, touch the desired name.

3 Touch .

Dialing from the preset dial list

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch .

3 Touch the desired item you want to dial.

The dial screen appears and dialing starts.

Receiving a phone call

1 Touch to answer the call.

 If you touch

while getting a call waiting, you

can switch to the talking person.

 Touch

to reject the call.

2 Touch

to end the call.

Changing the phone settings

Answering a call automatically

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Auto Answer] to switch “On” or “Off”

(default).

Switching the ring tone

You can select whether or not to use this product’s ring tone.

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Ring Tone] to switch “On” (default) or

“Off”.

Inverting names in the phone book

1 Display the “Bluetooth” screen.

 Displaying the “Bluetooth” screen on page 11

2 Touch [Invert Name].

Setting the private mode

During a conversation, you can switch to private mode (talk

directly on your cellular phone).

1 Touch or to turn private mode on or

off.

Adjusting the other party’s listening

volume

This product can be adjusted to the other party’s listening

volume.

1 Touch to switch between the three vol-

ume levels.

p Settings can be stored for each device.

Notes for hands-free phoning

General notes

 Connection to all cellular phones featuring Bluetooth wire-

less technology is not guaranteed.



The line-of-sight distance between this product and your

cellular phone must be 10 meters or less when sending and

receiving voice and data via Bluetooth technology.



With some cellular phones, the ring sound may not be

output from the speakers.

 If private mode is selected on the cellular phone, hands-free

phoning may be disabled.

Registration and connection

 Cellular phone operations vary depending on the type of cel-

lular phone. Refer to the instruction manual that came with

your cellular phone for detailed instructions.



When phone book transfer does not work, disconnect your

phone and then perform pairing again from your phone to

this product.

Making and receiving calls

 You may hear a noise in the following situations:

— When you answer the phone using the button on the

phone.

— When the person on the other end of the line hangs up the

phone.

 If the person on the other end of the line cannot hear the

conversation due to an echo, decrease the volume level for

hands-free phoning.



With some cellular phones, even after you press the accept

button on the cellular phone when a call comes in, hands-

free phoning may not be performed.



The registered name will appear if the phone number is

already registered in the phone book. When one phone

number is registered under different names, only the phone

number will be displayed.

The received call and the dialed number histories

 You cannot make a call to the entry of an unknown user (no

phone number) in the received call history.

 If calls are made by operating your cellular phone, no history

data will be recorded in this product.

Phone book transfers

 If there are more than 1 000 phone book entries on your cel-

lular phone, not all entries may download completely.



Depending on the phone, this product may not display the

phone book correctly.

 If the phone book in the phone contains image data, the

phone book may not be transferred correctly.

Displaying the Phone menu

screen

1 Press .

2 Touch

The Phone menu screen appears.

Making a phone call

You can make a phone call in many different ways.

Direct dialing

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch .

3 Touch the number keys to enter the phone

number.

4 Touch

to make a call.

5 Touch

to end the call.

p You may hear a noise when you hang up the phone.

Calling a number in the phone book

p The contacts on your phone will be automatically transferred

to this product.

p “Visibility” of the “Bluetooth” screen should be on.

 Switching visibility on page 11

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

2 Touch .

3 Touch the desired name on the list.

4 Touch the phone number you want to dial.

The dial screen appears and dialing starts.

5 Touch to end the call.

Dialing from the history

1 Display the “Phone menu” screen.

 Displaying the Phone menu screen on page 12

13< QRD3356-A >

Hands-free phoning Hands-free phoning

Radio

4821

6/10

AMFM1

Abcdefghi

000.0

MHz

Selects the FM1, FM2, FM3

or AM band.

Performs manual tuning.

Performs seek tuning or

non stop seek tuning.

Displays the preset channel list.

Select an item on the list ("1" to "6")

to switch to the preset channel.

Recalls the preset channel

stored to a key from memory.

Stores the current broadcast

frequency to a key.

HOLD

Releasing the key in a few seconds, skips

to the nearest station from the current

frequency. If you touch again while the

system is searching, cancels seek tuning

and performs manual tuning.

Keeping holding the key for a long

seconds, performs non stop seek tuning.

p By pressing or , you can also switch the preset

channels.

By pressing and hold or and release, you can

also perform seek tuning.

By keeping pressing and holding or , you can

perform non stop seek tuning. If you press again, non stop

seek tuning is canceled and the preset channel is switched.

Radio

 Depending on the cellular phone, phone book transfer may

not be available.

When using an iPod with this product, configure the settings of

this product according to the device to be connected.

iPod compatibility

This product supports only the following iPod models and iPod

software versions. Others may not work correctly.



iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus: iOS 7.0 or later.

 iPhone 3GS: iOS 6.0.1

 iPod touch (4th, 5th generation): iOS 6.0.1

 iPod touch (3rd generation): iOS 5.1.1

 iPod touch (2nd generation): iOS 4.2.1

 iPod classic 160GB (2009): Ver. 2.0.4

 iPod classic 160GB (2008): Ver. 2.0.1

 iPod classic 80GB: Ver. 1.1.2

 iPod nano (7th generation)

 iPod nano (6th generation): Ver. 1.2

 iPod nano (5th generation): Ver. 1.0.2

 iPod nano (4th generation): Ver. 1.0.4

 iPod nano (3rd generation): Ver. 1.1.3

p You can connect and control an iPod compatible with this

product by using separately sold connector cables.

p Operation methods may vary depending on the iPod model

and the software version.

p Depending on the software version of the iPod, it may not be

compatible with this product.

For details about iPod compatibility with this product, refer to the

information on our website.

This manual applies to the following iPod models.

iPod with 30-pin connector



iPhone 3GS, 4, 4s

 iPod touch 2nd, 3rd, 4th generation

 iPod classic 80GB, 160GB

 iPod nano 3rd, 4th, 5th, 6th generation

iPod with Lightning connector

 iPhone 6, 6 Plus

 iPhone 5, 5s, 5c

 iPod touch 5th generation

 iPod nano 7th generation

Information on the connections

and functions

The settings and cables required for connecting each device,

and the available sources are as follows.

iPod / iPhone with a 30-pin connector

When connecting via CD-IU201V (sold

separately)

 Available sources

iPod (audio)

iPod (video)

iPod / iPhone with a Lightning

connector

When connecting via CD-IU52 (sold

separately)

 Available sources

iPod (audio)

Setup for iPod

14 < QRD3356-A >< QRD3356-A >

Hands-free

phoning

Setup for iPod Radio

Radio

4821

6/10

AMFM1

Abcdefghi

000.0

MHz

Selects the FM1, FM2, FM3

or AM band.

Performs manual tuning.

Performs seek tuning or

non stop seek tuning.

Displays the preset channel list.

Select an item on the list ("1" to "6")

to switch to the preset channel.

Recalls the preset channel

stored to a key from memory.

Stores the current broadcast

frequency to a key.

HOLD

Releasing the key in a few seconds, skips

to the nearest station from the current

frequency. If you touch again while the

system is searching, cancels seek tuning

and performs manual tuning.

Keeping holding the key for a long

seconds, performs non stop seek tuning.

p By pressing or , you can also switch the preset

channels.

By pressing and hold

or and release, you can

also perform seek tuning.

By keeping pressing and holding

or , you can

perform non stop seek tuning. If you press again, non stop

seek tuning is canceled and the preset channel is switched.

Starting procedure

1 Press .

2 Touch [Radio].

The “Radio” screen appears.

Storing the strongest broadcast

frequencies

The BSM (best stations memory) function automatically stores

the six strongest broadcast frequencies under the preset tuning

keys “1” to “6”.

Storing broadcast frequencies with BSM may replace those

you have already saved.

p Previously stored broadcast frequencies may remain stored

if the number of frequencies stored has not reached the

limit.

1 Touch .

2 Touch

to begin a search.

While the message is displayed, the six strongest broadcast

frequencies will be stored under the preset tuning keys in order

of their signal strength.

 If you touch [Cancel], the storage process is

canceled.

Tuning into strong frequencies

p You can use this function when “Radio” is selected as the

source.

Local seek tuning allows you to only tune into those radio sta-

tions with sufficiently strong signals.

1 Display the “System” setting screen.

2 Touch [AV Source Settings].

3 Touch [Radio settings].

4 Touch [Local].

5 Touch the item you want to set.

 Off (default):

Turns the seek tuning setting off.



Level1 to Level4:

Sets the level of sensitivity for FM to Level1 to Level4 (for

AM Level1 or Level2).

The FM “Level4” (AM “Level2”) setting allows reception of

only stations with the strongest signals.

Radio

iPod / iPhone with a 30-pin connector

When connecting via CD-IU201V (sold

separately)

 Available sources

iPod (audio)

iPod (video)

iPod / iPhone with a Lightning

connector

When connecting via CD-IU52 (sold

separately)

 Available sources

iPod (audio)

15< QRD3356-A >

Setup for iPod Radio

DVD

4821

Stop

99 99

9999’99” -9999’99”

L+R

Pause

6/10

󰑬󰒔󰒋󰒓󰒈󰐿󰒂󰒇

󰑑󰑎󰑑

󰑬󰑯󰑤󰑦󰑌󰑠 󰑓󰑗󰒊󰑧󰒙󰐿󰑐󰑕󰒁󰒈󰒓

󰑱󰒄󰒓󰒔󰒑󰒍

Video source screen 2

Resumes playback (Bookmark).

This function is available for DVD-Video.

You can memorize one point as a

Bookmark for a disc (up to ve discs).

To clear the bookmark on the disc,

touch and hold this key.

Returns and begins playback from

the specied point.

This function is available for DVD-Video

and Video-CDs featuring PBC (playback

control).

Selects a track from the list.

 Selecting files from the file name list on page 17

Switches the media file type.

 Switching the media file type on page 17

Searches for the part you want to play.

 Searching for the part you want to play on page

Displays the DVD menu.

 Operating the DVD menu on page 17

Switches the subtitle/audio language.

 Switching the subtitle/audio language on page

p By pressing or , you can also skip files/chapters

forward or backward.

By pressing and holding or , you can also perform

fast reverse or fast forward.

4821

󰖃Track 99

9999’99” -9999’99”

Pause

6/10

Track number indicator

Skips les forward

or backward.

Switches between playback

and pause.

Audio source screen

4821

󰖃Track 99

6/10

Audio source screen

Plays les in random order.

: Does not play tracks in random order.

: Plays all tracks in random order.

Sets a repeat play range.

: Repeats the current disc.

: Repeats the current track.

This function is available for music CD.

DVD

4821

Stop

99 99

9999’99” -9999’99”

OFFFull 01

Pause

6/10

󰑬󰒔󰒋󰒓󰒈󰐿󰒂󰒇

󰑐󰑎󰑑

󰑬󰑯󰑤󰑦󰑌󰑠 󰑓󰑗󰒊󰑧󰒙󰐿󰑐󰑕󰒁󰒈󰒓

Video source screen 1

Performs fast reverse

or fast forward.

Touch again to change the playback

speed.

Stops playback.

Performs frame-by-frame playback.

HOLD

Performs slow-motion playback.

Each time you touch it changes

the speed in four steps in the following

order: 1/16

→

1/8

→

1/4

→

1/2

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

DVD

4821

Stop

99 99

9999’99” -9999’99”

L+R

Pause

6/10

󰑬󰒔󰒋󰒓󰒈󰐿󰒂󰒇

󰑑󰑎󰑑

󰑬󰑯󰑤󰑦󰑌󰑠 󰑓󰑗󰒊󰑧󰒙󰐿󰑐󰑕󰒁󰒈󰒓

󰑱󰒄󰒓󰒔󰒑󰒍

Video source screen 2

Selects the audio output from

[L+R], [Left], [Right], [Mix].

This function is available for Video-CDs

and DVDs recorded with LPCM audio.

Changes the viewing

angle (Multi-angle).

This function is available for DVDs

featuring multi-angle recordings.

Sets a repeat play range.

: Repeats all les.

: Repeats the current chapter.

: Repeats the current title.

Disc

16 < QRD3356-A >< QRD3356-A >

Disc Disc

DVD

4821

Stop

99 99

9999’99” -9999’99”

L+R

Pause

6/10

󰑬󰒔󰒋󰒓󰒈󰐿󰒂󰒇

󰑑󰑎󰑑

󰑬󰑯󰑤󰑦󰑌󰑠 󰑓󰑗󰒊󰑧󰒙󰐿󰑐󰑕󰒁󰒈󰒓

󰑱󰒄󰒓󰒔󰒑󰒍

Video source screen 2

Resumes playback (Bookmark).

This function is available for DVD-Video.

You can memorize one point as a

Bookmark for a disc (up to ve discs).

To clear the bookmark on the disc,

touch and hold this key.

Returns and begins playback from

the specied point.

This function is available for DVD-Video

and Video-CDs featuring PBC (playback

control).

Selects a track from the list.

 Selecting files from the file name list on page 17

Switches the media file type.

 Switching the media file type on page 17

Searches for the part you want to play.

 Searching for the part you want to play on page

Displays the DVD menu.

 Operating the DVD menu on page 17

Switches the subtitle/audio language.

 Switching the subtitle/audio language on page

p By pressing

or , you can also skip files/chapters

forward or backward.

By pressing and holding

or , you can also perform

fast reverse or fast forward.

If a Video-CD with PBC On is being played,

appears.

p Changing the wide screen mode.

 Common operations on page 30

You can play a normal music CD, Video-CD or DVD-Video using

the built-in drive of this product.

CAUTION

For safety reasons, video images cannot be viewed while your

vehicle is in motion. To view video images, stop in a safe place

and apply the parking brake.

Starting procedure

1 Press .

2 Insert the disc you want to play.

The source changes and then playback will start.

 Inserting and ejecting a disc on page 7

p If the disc is already set, select [Disc] as the playing source.

Selecting les from the le

name list

1 Touch .

2 Touch a track on the list to play back.

Switching the media le type

When playing a digital media containing a mixture of various

media file types you can switch between media file types to play.

1 Touch .

2 Touch the item you want to set.

 Music:

Switches the media file type to music (compressed audio).



Video:

Switches the media file type to video.



CD-DA:

Switches the media file type to CD (audio data (CD-DA)).

Searching for the part you

want to play

p For DVD-Videos, you can select [Title], [Chapter] or [10Key].

p For Video-CDs, you can select [Track] or [10Key] (PBC only).

1 Touch .

2 Touch the item to select the search function.

3 Touch [0] to [9] to input the desired number.

p To cancel an input number, touch [C].

4 Touch to start playback from the number

you registered.

Operating the DVD menu

You can operate the DVD menu by touching the menu item on

the screen directly.

This function may not work properly with some DVD disc

content. In that case, use touch panel keys to operate the

DVD menu.

1 Touch or .

2 Touch the desired menu item.

Switching the subtitle/audio

language

1 Touch or to change the language.

 : Changes the subtitle language.



: Changes the audio language.

 You can also switch the subtitle/audio languages

using the “DVD/DivX Setup” menu.

 Setting the top-priority languages on page 28

DVD

4821

Stop

99 99

9999’99” -9999’99”

L+R

Pause

6/10

󰑬󰒔󰒋󰒓󰒈󰐿󰒂󰒇

󰑑󰑎󰑑

󰑬󰑯󰑤󰑦󰑌󰑠 󰑓󰑗󰒊󰑧󰒙󰐿󰑐󰑕󰒁󰒈󰒓

󰑱󰒄󰒓󰒔󰒑󰒍

Video source screen 2

Selects the audio output from

[L+R], [Left], [Right], [Mix].

This function is available for Video-CDs

and DVDs recorded with LPCM audio.

Changes the viewing

angle (Multi-angle).

This function is available for DVDs

featuring multi-angle recordings.

Sets a repeat play range.

: Repeats all les.

: Repeats the current chapter.

: Repeats the current title.

17< QRD3356-A >

Disc Disc

ROM

4821

Stop

9999’99” -9999’99”

OFFFull01

Pause

6/10

Abcdefghi

Stops playback.

Performs frame-by-frame playback.

Performs slow-motion playback.

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

Sets a repeat play range.

or : Repeats all les.

: Repeats the current folder.

: Repeats the current le.

(Example: Disc)

HOLD

Compressed video les

USB

4821

6/10

Abcdefghi

ABC

9999’99” -9999’99”

Skips files forward

or backward.

Switches between playback

and pause.

Playback screen 1 (Example: USB)

Switches the current music

information display.

Displays the artwork when the file

with the artwork is being played.

The artwork file type needs to be JPEG,

and the file size should be less than 99 KB.

USB

4821

6/10

Abcdefghi

ABC

Plays files in random order.

: Does not play files in random order

: Plays all files within the repeat

range in random order.

Sets a repeat play range.

or : Repeats all files.

: Repeats the current folder.

: Repeats the current file.

Selects the previous folder

or the next folder.

Playback screen 2 (Example: USB)

Selects a file from the list.

 Selecting files from the file name list on page 18

Switches the media file type.

 Switching the media file type on page 18

p By pressing

or , you can also skip files forward or

backward.

By pressing and holding

or , you can perform fast

reverse or fast forward.

You can play compressed audio files stored in a disc or a USB

storage device.



Media compatibility chart on page 41

Starting procedure (for Disc)

1 Press .

2 Insert the disc you want to play.

The source changes and then playback will start.

 Inserting and ejecting a disc on page 7

p If the disc is already set, select [Disc] as the playing source.

Starting procedure (for USB)

1 Press .

2 Plug the USB storage device.

 Plugging and unplugging a USB storage device on page 7

3 Touch [USB].

p Play back is performed in order of folder numbers. Folders

are skipped if they contain no playable files.

Selecting les from the le

name list

You can find files or folders to play back using the file name or

folder name list.

1 Touch .

2 Touch a file on the list to play back.

p Files are played back in file number order.

Switching the media le type

When playing a digital media containing a mixture of various

media file types you can switch between media file types to play.

1 Touch .

2 Touch the item you want to set.

 Music:

Switches the media file type to music (compressed audio).



Video:

Switches the media file type to video.



CD-DA:

Switches the media file type to CD (audio data (CD-DA)).



Photo:

Switches the media file type to still image (JPEG or BMP

data).

Compressed audio les

18 < QRD3356-A >< QRD3356-A >

Compressed audio les Compressed video les

ROM

4821

Stop

9999’99” -9999’99”

OFFFull01

Pause

6/10

Abcdefghi

Stops playback.

Performs frame-by-frame playback.

Performs slow-motion playback.

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

Sets a repeat play range.

or : Repeats all les.

: Repeats the current folder.

: Repeats the current le.

(Example: Disc)

HOLD

ROM

4821

Stop

9999’99” -9999’99”

OFFFull 01

Pause

6/10

Abcdefghi

Touch again to change the

playback speed.

Performs fast reverse

or fast forward.

Switches between

playback and pause.

(Example: Disc)

Selects a file from the list.

 Selecting files from the file name list on page 19

Switches the subtitle/audio language.

 Switching the subtitle/audio language on page

Switches the media file type.

 Switching the media file type on page 18

p By pressing

or , you can also skip files forward or

backward.

By pressing and holding

or , you can perform fast

reverse or fast forward.

Changing the wide screen mode.

 Common operations on page 30

You can play compressed video files stored on a disc or in an

USB storage device.



Media compatibility chart on page 41

CAUTION

For safety reasons, video images cannot be viewed while your

vehicle is in motion. To view video images, stop in a safe place

and apply the parking brake.

Starting procedure

 Compressed audio files on page 18

Selecting les from the le

name list

You can select files to view using the file name list.

1 Touch .

2 Touch a file on the list to play back.

p Files are played back in file number order and folders are

skipped when they contain no files.

 Touch the playback sign of the thumbnail to

preview the file.

Compressed video les

Starting procedure (for Disc)

1 Press .

2 Insert the disc you want to play.

The source changes and then playback will start.

 Inserting and ejecting a disc on page 7

p If the disc is already set, select [Disc] as the playing source.

Starting procedure (for USB)

1 Press .

2 Plug the USB storage device.

 Plugging and unplugging a USB storage device on page 7

3 Touch [USB].

p Play back is performed in order of folder numbers. Folders

are skipped if they contain no playable files.

Selecting les from the le

name list

You can find files or folders to play back using the file name or

folder name list.

1 Touch .

2 Touch a file on the list to play back.

p Files are played back in file number order.

Switching the media le type

When playing a digital media containing a mixture of various

media file types you can switch between media file types to play.

1 Touch .

2 Touch the item you want to set.

 Music:

Switches the media file type to music (compressed audio).



Video:

Switches the media file type to video.



CD-DA:

Switches the media file type to CD (audio data (CD-DA)).



Photo:

Switches the media file type to still image (JPEG or BMP

data).

19< QRD3356-A >

Compressed audio les Compressed video les

iPod

4821

Abcdefghi

ABC

99999/99999

9999’99” -9999’99”

6/10

Audio source screen 1

Switches between playback and

pause.

Skips files forward or

backward.

iPod

USB

4821

Abcdefghi

6/10

Full

Sets a repeat play range.

: Repeats all les.

: Repeats the current folder.

Plays les in random order.

: Does not play les in random order.

: Plays all les in the current repeat

play range in random order.

Selects the previous

or next folder.

Rotates the displayed

picture 90° clockwise.

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

USB

4821

Abcdefghi

6/10

Full

Skips les forward

or backward.

Switches between

playback and pause.

Selects a file from the list.

 Selecting files from the file name list on page 20

Switches the media file type.

 Switching the media file type on page 20

p By pressing

or , you can also skip files forward or

backward.

By pressing and holding

or , you can search 10

files at a time. If the file currently being played is the first or

last file in the folder, the search is not performed.

Changing the wide screen mode.

 Common operations on page 30

You can view still images stored in an USB storage device.



Media compatibility chart on page 41

Starting procedure

1 Press .

2 Plug the USB storage device.

 Plugging and unplugging a USB storage device on page 7

p Playback is performed in order of folder numbers. Folders

are skipped if they contain no playable files.

3 Touch [USB].

The image is displayed on the screen.

Selecting les from the le

name list

You can select files to view using the file name list.

1 Touch .

2 Touch a file on the list to play back.

p Touching a folder on the list shows its contents. You can play

a file on the list by touching it.

Switching the media le type

When playing a digital media containing a mixture of various

media file types you can switch between media file types to play.

1 Touch .

2 Touch the item you want to set.

 Music:

Switches the media file type to music (compressed audio).



Video:

Switches the media file type to video.



Photo:

Switches the media file type to still image (JPEG data).

Setting the slideshow interval

JPEG or BMP files can be viewed as a slideshow on this product.

In this setting, the interval between each image can be set.

This setting is available during playback of the JPEG or BMP

files.

1 Display the “Video Setup” screen.

2 Touch [Time Per Photo Slide].

3 Touch the item you want to set.

The following items are available:

“10sec” (default), “5sec”, “15sec”, “Manual”.

Still image les

20 < QRD3356-A >< QRD3356-A >

Still image les iPod

iPod

4821

Abcdefghi

ABC

99999/99999

9999’99” -9999’99”

6/10

Audio source screen 1

Switches between playback and

pause.

Skips files forward or

backward.

iPod

4821

Abcdefghi

ABC

99999/99999

6/10

Sets a shuffle play.

: Normal playback

: Fast playback

: Slow-motion playback

Audio source screen

: Plays randomly songs or

videos within the selected list.

: Plays album randomly.

Sets a repeat play range.

: Repeats all in the selected list.

: Repeats the current song or

video.

Changes the audiobook speed.

1/2

iPod

4821

Abcdefghi

99999/99999

9999’99” -9999’99”

6/10

Full

Video source screen

Performs fast reverse or

fast forward.

Selects a track from the list.

 Selecting song or video sources from the playlist

screen on page 22

p By pressing the

or button, you can also skip files

forward or backward.

By pressing and hold the

or button, you can also

perform fast reverse or fast forward.

Changing the wide screen mode.

 Common operations on page 30

Connecting your iPod

For iPod with a 30-pin connector users

Via USB cable

p Depending on your iPod, a USB interface cable for iPod /

iPhone (CD-IU201V) (sold separately), is required to connect.

iPod audio and/or video sources are enabled if either of the

cables is connected.



iPod / iPhone with 30-pin connector on page 34

For iPod / iPhone with a Lightning connector users

Via USB cable

p With a USB interface cable for iPod/iPhone (CD-IU52) (sold

separately), iPod audio source is available.

However, functions related to iPod video files are not available.



iPod / iPhone with Lightning connector on page 34

CAUTION

For safety reasons, video images cannot be viewed while your

vehicle is in motion. To view video images, stop in a safe place

iPod

Selecting les from the le

name list

You can select files to view using the file name list.

1 Touch .

2 Touch a file on the list to play back.

p Touching a folder on the list shows its contents. You can play

a file on the list by touching it.

Switching the media le type

When playing a digital media containing a mixture of various

media file types you can switch between media file types to play.

1 Touch .

2 Touch the item you want to set.

 Music:

Switches the media file type to music (compressed audio).



Video:

Switches the media file type to video.



Photo:

Switches the media file type to still image (JPEG data).

Setting the slideshow interval

JPEG or BMP files can be viewed as a slideshow on this product.

In this setting, the interval between each image can be set.

This setting is available during playback of the JPEG or BMP

files.

1 Display the “Video Setup” screen.

2 Touch [Time Per Photo Slide].

3 Touch the item you want to set.

The following items are available:

“10sec” (default), “5sec”, “15sec”, “Manual”.

21< QRD3356-A >

Still image les iPod

AUX

4821

Full

6/10

Switches between the screen to

operate video les and that to

operate music les.

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

p is only available when there are both audio and video

files on the auxiliary equipment.

p A Mini-jack AV cable (CD-RM10) (sold separately) is required

for connection.

 External video component and the display on page 35

CAUTION

For safety reasons, video images cannot be viewed while your

vehicle is in motion. To view video images, stop in a safe place

and apply the parking brake.

Starting procedure

You can display the video image output by the device connected

to video input.

1 Display the “System” setting screen.

2 Confirm that “AUX Input” is turned on.

3 Press .

4 Touch [AUX].

AUX source

and apply the parking brake.

Starting procedure

1 Connect your iPod.

 Connecting your iPod on page 21

The source changes and then playback will start.

If connecting an iPhone or iPod touch, quit applications

before.

2 Press .

3 Touch [iPod].

Selecting song or video sources

from the playlist screen

You can search for the song or video you want to play from the

playlist screen.

1 Touch .

2 Touch

or to switch the music or video

category list.

3 Touch the category you want to search for.

4 Touch the title of the list that you want to play.

If you can not find the desired song or video, try to search again

according to the above steps.

5 Start playback of the selected list.

p Depending on the generation or version of the iPod, some

functions may not be available.

p You can play playlists created with the MusicSphere applica-

tion. The application is available on our website.

Up to 1 000 items can be displayed in the list.

280BT

Bluetooth

9999

9999’99” -9999’99”

4821

6/10

Abcdefghi

ABC

Playback screen 1

Skips files forward or backward.

Track number indicator

You cannot use this function while

the audio is played back.

Bluetooth

9999

4821

6/10

Abcdefghi

ABC

Plays files in random order.

Playback screen

Sets a repeat play range.

Switches between playback

and pause.

Selects a file from the list.

 Selecting files from the file name list on page 22

p By pressing the

or button, you can also skip files

forward or backward.

By pressing and hold the

or button, you can also

perform fast reverse or fast forward.

Before using the Bluetooth audio player, register and con-

nect the device to this product.



Registering your Bluetooth devices on page 11

p Depending on the Bluetooth device connected to this prod-

uct, the available operations with this product may be limited

or differ from the descriptions in this manual.

While you are listening to songs on your Bluetooth device,

please refrain from operating the phone function as much as

possible. If you try operating, the signal may cause noise for

song playback.

When you are talking on the Bluetooth device connected to

this product via Bluetooth, it may pause playback.

Starting procedure

1 Display the “System” setting screen.

2 Touch [AV Source Settings].

3 Confirm that “Bluetooth Audio” is turned on.

4 Press

5 Touch [Bluetooth Audio].

Selecting les from the le

name list

p This function may not be available depending on some

Bluetooth device.

1 Touch .

2 Touch a file or a folder on the list to play back.

Bluetooth audio player

22 < QRD3356-A >< QRD3356-A >

iPod Bluetooth audio player AUX source

AUX

4821

Full

6/10

Switches between the screen to

operate video les and that to

operate music les.

Hides the touch panel keys.

To display again the keys,

touch anywhere on the screen.

p is only available when there are both audio and video

files on the auxiliary equipment.

p A Mini-jack AV cable (CD-RM10) (sold separately) is required

for connection.

 External video component and the display on page 35

CAUTION

For safety reasons, video images cannot be viewed while your

vehicle is in motion. To view video images, stop in a safe place

and apply the parking brake.

Starting procedure

You can display the video image output by the device connected

to video input.

1 Display the “System” setting screen.

2 Confirm that “AUX Input” is turned on.

3 Press

4 Touch [AUX].

The image is displayed on the screen.

Setting the video signal

When you connect this product to an AUX equipment, select the

suitable video signal setting.

You can operate this function only for the video signal input

into the AUX input.

1 Display the “Video Setup” screen.

2 Touch [Video Signal Setting].

3 Touch [AUX].

4 Touch the item you want to set.

The following items are available:

Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.

Displaying the “System” set-

ting screen

1 Press .

2 Touch

, and then .

The “System” setting screen appears.

Activating the Bluetooth audio

source

280BT

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [AV Source Settings].

3 Touch [Bluetooth Audio] to switch “On”

(default) or “Off”.

Setting the ever scroll

When “Ever Scroll” is set to “On”, the recorded text information

scrolls continuously in the display while the vehicle is stopped.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Ever Scroll] to switch “On” or “Off”

(default).

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required

for utilizing the rear view camera function. (For details, consult

your dealer.)

Rear view camera

This product features a function that automatically switches to

the full-screen image of the rear view camera installed on your

vehicle, when the shift lever is in the REVERSE (R) position.

Camera for Rear View mode

Rear View can be displayed at all times. Please note that with

this setting, the camera image is not resized to fit, and that a

portion of what is seen by the camera is not viewable.

AUX sourceSystem settings

p By pressing the or button, you can also skip files

forward or backward.

By pressing and hold the or button, you can also

perform fast reverse or fast forward.

Before using the Bluetooth audio player, register and con-

nect the device to this product.



Registering your Bluetooth devices on page 11

p Depending on the Bluetooth device connected to this prod-

uct, the available operations with this product may be limited

or differ from the descriptions in this manual.

While you are listening to songs on your Bluetooth device,

please refrain from operating the phone function as much as

possible. If you try operating, the signal may cause noise for

song playback.

When you are talking on the Bluetooth device connected to

this product via Bluetooth, it may pause playback.

Starting procedure

1 Display the “System” setting screen.

2 Touch [AV Source Settings].

3 Confirm that “Bluetooth Audio” is turned on.

4 Press .

5 Touch [Bluetooth Audio].

Selecting les from the le

name list

p This function may not be available depending on some

Bluetooth device.

1 Touch .

2 Touch a file or a folder on the list to play back.

23< QRD3356-A >

Bluetooth audio player AUX source System settings

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Dimmer Settings].

3 Touch [Day/Night] to switch the following

items.

 Day (default):

Turns the dimmer manually to off.



Night:

Turns the dimmer manually to on.

Setting the dimmer duration

optional

You can adjust the time that the dimmer is turned on or off.

p You can use this function when “Dimmer Trigger” is set to

“Time”.

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Dimmer Settings].

3 Touch [Dimmer Duration].

The “Duration Setting” screen appears.

4 Touch the time display to activate the adjust-

ment mode.

5 Touch the graph to set the dimmer duration.

 You can also set the dimmer duration touching

or .

Each touch of or moves the cursor back-

ward or forward in the 15 minute width.

 The default setting is 18:00-6:00 (6:00 PM-6:00

AM).

 When the cursors are placed on the same point,

the dimmer available time is 0 hours.

 When the cursor for off time setting is placed on

the left end and the cursor for on time setting is

placed on the right end, the dimmer available

time is 0 hours.

 When the cursor for on time setting is placed on

the left end and the cursor for off time setting is

CAUTION

Pioneer recommends the use of a camera which outputs

mirror reversed images, otherwise the screen image may

appear reversed.

Immediately verify whether the display changes to a

rear view camera image when the shift lever is moved to

REVERSE (R) from another position.

When the screen changes to full-screen rear view camera

image during normal driving, switch to the opposite setting

in “Camera Polarity”.

If you touch while the camera image is displayed, the

displayed image will turn off temporarily.

Setting rear view camera activation

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Camera Settings].

3 Touch [Back Camera Input] to switch “On” or

“Off” (default).

Setting the polarity of the rear view

camera

p This function is available when “Back Camera Input” is

“On”.



Setting rear view camera activation on page 24

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Camera Settings].

3 Touch [Camera Polarity].

 Battery (default):

The polarity of the connected lead is positive.



Ground:

The polarity of the connected lead is negative.

Setting the camera for Rear

View mode

To display “Rear View” at all times, “Rear View” needs to be

set to “On”.

1 Press .

2 Touch [Rear View] to switch “On” or “Off”

(default).

If no operations are performed for seven seconds on the AV

operation screen, the camera view will appear automatically.

To set the rear view camera for Rear View mode, set “Back

Camera Input” to “On”.



Setting rear view camera activation on page 24

Selecting the system language

 If the embedded language and the selected language setting

are not the same, text information may not display properly.

 Some characters may not be displayed properly.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [System Language].

3 Touch the language that you want to use.

Setting the beep sound

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Beep Tone] to switch “On”(default) or

“Off”.

Adjusting the response posi-

tions of the touch panel (touch

panel calibration)

If you feel that the touch panel keys on the screen deviate from

the actual positions that respond to your touch, adjust the

response positions of the touch panel screen.

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

p Do not use sharp pointed tools such as a ballpoint or

mechanical pen, which could damage the screen.

p Do not turn off the engine while saving the adjusted position

data.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Touch Panel Calibration].

3 Touch [Yes].

4 Touch four corners of the screen along the

arrows.

5 Press

The adjustment results are saved.

6 Press once again.

Proceed to 16-point adjustment.

7 Gently touch the center of the “+” mark dis-

played on the screen.

The target indicates the order.

 When you press , the previous adjustment posi-

tion returns.

 When you press and hold

, the adjustment is

canceled.

8 Press and hold

The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Dimmer Settings].

3 Touch [Dimmer Trigger].

4 Touch the item.

 Auto (default):

Switches the dimmer to on or off automatically according to

your vehicle’s headlight turning on or off.



Manual:

Switches the dimmer to on or off manually.



Time:

Switches the dimmer to on or off at the time you adjusted.

Setting the dimmer duration in day

or night

p You can use this function when “Dimmer Trigger” is set to

“Manual”.

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

24 < QRD3356-A >< QRD3356-A >

System settings System settings

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Dimmer Settings].

3 Touch [Day/Night] to switch the following

items.

 Day (default):

Turns the dimmer manually to off.



Night:

Turns the dimmer manually to on.

Setting the dimmer duration

optional

You can adjust the time that the dimmer is turned on or off.

p You can use this function when “Dimmer Trigger” is set to

“Time”.

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Dimmer Settings].

3 Touch [Dimmer Duration].

The “Duration Setting” screen appears.

4 Touch the time display to activate the adjust-

ment mode.

5 Touch the graph to set the dimmer duration.

 You can also set the dimmer duration touching

or .

Each touch of

or moves the cursor back-

ward or forward in the 15 minute width.

 The default setting is 18:00-6:00 (6:00 PM-6:00

AM).

 When the cursors are placed on the same point,

the dimmer available time is 0 hours.

 When the cursor for off time setting is placed on

the left end and the cursor for on time setting is

placed on the right end, the dimmer available

time is 0 hours.

 When the cursor for on time setting is placed on

the left end and the cursor for off time setting is

placed on the right end, the dimmer available

time is 24 hours.



The time display of the dimmer duration adjusting

bar is depending on the clock display setting.

 Setting the time and date on page 30

Adjusting the picture

You can adjust the picture for each source and rear view camera.

CAUTION

For safety reasons, you cannot use some of these functions

while your vehicle is in motion. To enable these functions, you

must stop in a safe place and apply the parking brake. Refer

to Important Information for the User (a separate manual).

1 Display the screen you wish to adjust.

2 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

3 Touch [Picture Adjustment].

4 Touch the item to select the function to be

adjusted.

 Brightness:

Adjusts the black intensity. (–24 to +24)



Contrast:

Adjusts the contrast. (–24 to +24)



Color:

Adjusts the color saturation. (–24 to +24)



Hue:

Adjusts the tone of color (which color is emphasized, red or

green). (–24 to +24)



Dimmer:

Adjusts the brightness of the display. (+1 to +48)

 With some pictures, you cannot adjust Hue and

Color.

 When you touch [Rear View], the mode changes

to the picture adjustment for rear view. By touch-

ing [Source], you can return to the picture adjust-

ment for AV source.

5 Touch

, , , to adjust.

 The adjustments of “Brightness”, “Contrast”

and “Dimmer” are stored separately when your

vehicle’s headlights are off (daytime) and on

(nighttime).



“Brightness” and “Contrast” are switched auto-

matically depending on whether the vehicle’s

headlights are on or off.

 “Dimmer” can be changed the setting or the time

to switch it to on or off.

 Setting the dimmer on page 24

 The setting contents can be memorized

separately.

4 Touch four corners of the screen along the

arrows.

5 Press .

The adjustment results are saved.

6 Press once again.

Proceed to 16-point adjustment.

7 Gently touch the center of the “+” mark dis-

played on the screen.

The target indicates the order.

 When you press , the previous adjustment posi-

tion returns.

 When you press and hold , the adjustment is

canceled.

8 Press and hold .

The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

1 Display the “System” setting screen.

 Displaying the “System” setting screen on page 23

2 Touch [Dimmer Settings].

3 Touch [Dimmer Trigger].

4 Touch the item.

 Auto (default):

Switches the dimmer to on or off automatically according to

your vehicle’s headlight turning on or off.



Manual:

Switches the dimmer to on or off manually.



Time:

Switches the dimmer to on or off at the time you adjusted.

Setting the dimmer duration in day

or night

p You can use this function when “Dimmer Trigger” is set to

“Manual”.

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

25< QRD3356-A >

System settings System settings

Boosting the bass

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Bass Booster].

3 Touch to select the bass boost level from 0 to

+6.

Setting the high pass lter

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [High Pass Filter].

3 Touch the item.

The following items are available:

Off(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Using the equalizer

Recalling equalizer curves

There are seven stored equalizer curves that you can easily recall

at any time. Here is a list of the equalizer curves:



S.Bass is a curve in which only low-pitched sound is boosted.

 Powerful is a curve in which low- and high-pitched sounds

are boosted.



Natural is a curve in which low- and high-pitched sounds

are slightly boosted.



Vocal is a curve in which the midrange, which is the human

vocal range, is boosted.



Flat is a flat curve in which nothing is boosted.

 Custom1 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.



Custom2 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.

The default setting is “Powerful”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Graphic EQ].

3 Touch the equalizer you want.

Displaying the “Audio” setting

screen

1 Press .

2 Touch

, and then .

The “Audio” setting screen appears.

Using fader/balance adjustment

p This function is available when “Rear Speaker Output” is

set to “Full”, and “Preout” is set to “Rear”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Fader/Balance].

3 Touch

or to adjust the front/rear speaker

balance.

4 Touch

or to adjust the left/right speaker

balance.

p “Front15” to “Rear15” is displayed as the front/rear speaker

balance moves from the front to rear.

“Left15” to “Right15” is displayed as the left/right speaker

balance moves from the left to right.

The default setting is “F/R 0 L/R 0”.

 You can also set the fader/balance by touching

the point on the displayed table.

Using balance adjustment

p This function is available when “Rear Speaker Output” and

“Preout” are set to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Balance].

3 Touch

or to adjust the left/right speaker

balance.

p “Left15” to “Right15” is displayed as the left/right speaker

balance moves from the left to right.

The default setting is “L/R 0”.

 You can also set the balance by touching the point

on the displayed table.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of

each source to prevent radical changes in volume when switch-

ing between sources.

Settings are based on the FM tuner volume level, which

remains unchanged.

p This function is not available when the FM tuner is selected

as the AV source.

1 Compare the FM tuner volume level with the

level of the source you want to adjust.

2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

3 Touch [Source Level Adjuster].

4 Touch

or to adjust the source volume.

p If you directly touch the area where the cursor can be moved,

the SLA setting will be changed to the value of the touched

point.

“+4” to “–4” is displayed as the source volume is increased

or decreased.

The default setting is “0”.

Adjusting loudness

This function compensates for deficiencies in the low-frequency

and high-frequency ranges at low volume.

This function is not available while you make or receive a call

using the hands-free function.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Loudness].

3 Touch the item.

The following items are available:

Off (default), Low, Mid, High.

Using the subwoofer output

This product is equipped with a subwoofer output mechanism,

which can be turned on or off.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Subwoofer] to switch “On” (default) or

“Off”.

Adjusting the subwoofer

settings

p This function is available only when “Subwoofer” is “On”.

 Using the subwoofer output on page 26

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Subwoofer Settings].

3 Touch

or to turn the subwoofer phase

to normal or reverse.

4 Touch

or to adjust the subwoofer level

between -24 and 6.

5 Touch

or to adjust the subwoofer

frequency.

The following items are available:

80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Switching the rear speaker

output

1 Turn the source off.

2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

3 Touch [Rear Speaker Output].

4 Touch to switch “Full” (default) or

“Subwoofer”.

 When this function is set to “Subwoofer

Settings”, “Preout” is fixed to “Subwoofer

Settings”.

Switching the RCA rear output

When “Rear Speaker Output” is set to “Subwoofer Settings”,

this setting is fixed to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Preout] to switch “Subwoofer

Settings”(default) or “Rear”.

Audio adjustments

26 < QRD3356-A >< QRD3356-A >

Audio adjustments Audio adjustments

Boosting the bass

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Bass Booster].

3 Touch to select the bass boost level from 0 to

+6.

Setting the high pass lter

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [High Pass Filter].

3 Touch the item.

The following items are available:

Off(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Using the equalizer

Recalling equalizer curves

There are seven stored equalizer curves that you can easily recall

at any time. Here is a list of the equalizer curves:



S.Bass is a curve in which only low-pitched sound is boosted.

 Powerful is a curve in which low- and high-pitched sounds

are boosted.



Natural is a curve in which low- and high-pitched sounds

are slightly boosted.



Vocal is a curve in which the midrange, which is the human

vocal range, is boosted.



Flat is a flat curve in which nothing is boosted.

 Custom1 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.



Custom2 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.

The default setting is “Powerful”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Graphic EQ].

3 Touch the equalizer you want.

Customizing the equalizer curves

You can adjust the currently selected equalizer curve setting

as desired. Adjustments can be made with a 5-band graphic

equalizer.

If you make adjustments when a curve “S.Bass”, “Powerful”,

“Natural”, “Vocal”, or “Flat” is selected, the equalizer curve

settings will be changed to “Custom1” mandatorily.

If you make adjustments when the “Custom2” curve is

selected for example, the “Custom2” curve will be updated.

“Custom1” and “Custom2” curves can be created common

to all sources.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Graphic EQ].

3 Select a curve that you want to use as the basis

of customizing.

4 Touch the frequency for which you want to

adjust the level.

p If you trail a finger across the bars of multiple equalizer

bands, the equalizer curve settings will be set to the value of

the touched point on each bar.

Selecting the theme color

A theme color can be selected from 3 different colors.

1 Display the “Theme” screen.

2 Touch [Theme].

3 Touch the color you want.

Theme menu

Adjusting the subwoofer

settings

p This function is available only when “Subwoofer” is “On”.

 Using the subwoofer output on page 26

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Subwoofer Settings].

3 Touch

or to turn the subwoofer phase

to normal or reverse.

4 Touch or to adjust the subwoofer level

between -24 and 6.

5 Touch or to adjust the subwoofer

frequency.

The following items are available:

80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Switching the rear speaker

output

1 Turn the source off.

2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

3 Touch [Rear Speaker Output].

4 Touch to switch “Full” (default) or

“Subwoofer”.

 When this function is set to “Subwoofer

Settings”, “Preout” is fixed to “Subwoofer

Settings”.

Switching the RCA rear output

When “Rear Speaker Output” is set to “Subwoofer Settings”,

this setting is fixed to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Preout] to switch “Subwoofer

Settings”(default) or “Rear”.

27< QRD3356-A >

Audio adjustments Audio adjustments Theme menu

4 Touch [0] to [9] to input a four-digit code

number.

5 Touch the following key.

Registers the code number, and you can now

set the level.

6 Touch any number between [1] to [8] to select

the desired level.

 [8]: Enables playback of the entire disc (initial setting).

 [7] to [2]: Enables playback of discs for children and non-

adult oriented discs.



[1]: Enables only playback of discs for children.

7 Touch the following key.

Sets the parental lock level.

p We recommend to keep a record of your code number in

case you forget it.

p The parental lock level is recorded on the disc. You can con-

firm it by looking at the disc package, the included literature

or the disc itself. You cannot use parental lock with discs that

do not feature a recorded parental lock level.

With some discs, parental lock operates to skip certain

scenes only, after which normal playback resumes. For

details, refer to the disc’s instructions.

Setting the DivX Subtitle

p This setting is available when the selected source is “Disc” or

“USB”.

1 Display the “Video Setup” screen.

2 Touch [DivX Subtitle] to switch “Original”

(default) or “Custom”.

Setting the top-priority

languages

You can assign the top-priority language to the top-priority sub-

title, audio and menu in initial playback. If the selected language

is recorded on the disc, subtitles, audio and menu are displayed

or output in that language.

This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

Setting the subtitle language

You can set a desired subtitle language. When available, the

subtitles will be displayed in the selected language.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Subtitle Language].

The pop-up menu appears.

4 Touch the desired language.

When you select “Others”, a language code input screen is

shown. Input the four-digit code of the desired language then

touch

 If the selected language is not available, the lan-

guage specified on the disc is displayed.

 You can also switch the subtitle language by

touching the switch subtitle languages key during

playback.

 The setting made here will not be affected even if

the subtitle language is switched during playback

using the switch subtitle languages key.

Setting the audio language

You can set the preferred audio language.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Audio Language].

The pop-up menu appears.

4 Touch the desired language.

When you select “Others”, a language code input screen is

shown. Input the four-digit code of the desired language then

touch

 If the selected language is not available, the lan-

guage specified on the disc is displayed.

 You can also switch the audio language by

touching the switch audio languages key during

playback.

 The setting made here will not be affected even if

the audio language is switched during playback

using the switch audio languages key.

Setting the menu language

You can set the preferred language in which the menus recorded

on a disc are displayed.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Menu Language].

The pop-up menu appears.

4 Touch the desired language.

When you select “Others”, a language code input screen is

shown. Input the four-digit code of the desired language then

touch

 If the selected language is not available, the lan-

guage specified on the disc is displayed.

Setting the angle icon display

The angle icon can be set so it appears on scenes where the

angle can be switched.

This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Multi Angle] repeatedly until the

desired setting appears.

 On (default): Turns the multi-angle setting on.

 Off: Turns the multi-angle setting off.

Setting parental lock

Some DVD-Video discs let you use parental lock to set restric-

tions so that children cannot watch violent or adult-oriented

scenes. You can set the parental lock level in steps as desired.

When you set a parental lock level and then play a disc fea-

turing parental lock, code number input indications may be

displayed. In this case, playback will begin when the correct

code number is input.

This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

Setting the code number and level

When you first use this function, register your code number.

If you do not register a code number, the parental lock will not

operate.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Parental].

The “Parental” screen appears.

Setting up the video player

28 < QRD3356-A >< QRD3356-A >

Setting up the video player Setting up the video player

4 Touch [0] to [9] to input a four-digit code

number.

5 Touch the following key.

Registers the code number, and you can now

set the level.

6 Touch any number between [1] to [8] to select

the desired level.

 [8]: Enables playback of the entire disc (initial setting).

 [7] to [2]: Enables playback of discs for children and non-

adult oriented discs.



[1]: Enables only playback of discs for children.

7 Touch the following key.

Sets the parental lock level.

p We recommend to keep a record of your code number in

case you forget it.

p The parental lock level is recorded on the disc. You can con-

firm it by looking at the disc package, the included literature

or the disc itself. You cannot use parental lock with discs that

do not feature a recorded parental lock level.

With some discs, parental lock operates to skip certain

scenes only, after which normal playback resumes. For

details, refer to the disc’s instructions.

Setting the DivX Subtitle

p This setting is available when the selected source is “Disc” or

“USB”.

1 Display the “Video Setup” screen.

2 Touch [DivX Subtitle] to switch “Original”

(default) or “Custom”.

Displaying your DivX VOD reg-

istration code

If you want to play DivX

VOD (video on demand) content on this

product, you must first register this product with your DivX VOD

content provider. You do this by generating a DivX VOD registra-

tion code, which you submit to your provider.

Keep a record of the code as you will need it when you

p This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [DivX® VOD].

The “DivX® VOD” screen appears.

p If a registration code has already been activated, it cannot be

displayed.

4 Touch [Registration Code].

Your 10-digit registration code is displayed.

p Make a note of the code as you will need it when you deregis-

ter from a DivX VOD provider.

Displaying your DivX VOD

deregistration code

A registration code registered with a deregistration code can

be deleted.

This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [DivX® VOD].

The “DivX® VOD” screen appears.

4 Touch [Deregistration Code].

Your 8-digit deregistration code is displayed.

p Make a note of the code as you will need it when you deregis-

ter from a DivX VOD provider.

Automatic playback of DVDs

When a DVD disc with a DVD menu is inserted, this product will

cancel the menu automatically and start playback from the first

chapter of the first title.

Some DVDs may not operate properly. If this function is not

fully operable, turn this function off and start playback.

p This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [DVD Auto Play] repeatedly until the

desired setting appears.

 Off (default): Turns the DVD Auto Play setting off

 On: Turns the DVD Auto Play setting on

Setting the video signal for the

rear view camera

When you connect a rear view camera to this product, select the

suitable video signal setting.

You can operate this function only for the video signal input

into the AV input.

1 Display the “Video Setup” screen.

2 Touch [Video Signal Setting].

3 Touch [Camera].

The pop-up menu appears.

4 Touch the item you want to set.

Setting the angle icon display

The angle icon can be set so it appears on scenes where the

angle can be switched.

This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Multi Angle] repeatedly until the

desired setting appears.

 On (default): Turns the multi-angle setting on.

 Off: Turns the multi-angle setting off.

Setting parental lock

Some DVD-Video discs let you use parental lock to set restric-

tions so that children cannot watch violent or adult-oriented

scenes. You can set the parental lock level in steps as desired.

When you set a parental lock level and then play a disc fea-

turing parental lock, code number input indications may be

displayed. In this case, playback will begin when the correct

code number is input.

This setting is available when the selected source is “Disc”,

“CD”, “Video CD” or “DVD”.

Setting the code number and level

When you first use this function, register your code number.

If you do not register a code number, the parental lock will not

operate.

1 Display the “Video Setup” screen.

2 Touch [DVD/DivX Setup].

3 Touch [Parental].

The “Parental” screen appears.

29< QRD3356-A >

Setting up the video player Setting up the video player

2 Touch the desired mode.

 Full:

A 4:3 picture is enlarged in the horizontal direction only,

enabling you to enjoy an image without any omissions.



Zoom:

A 4:3 picture is enlarged in the same proportion both verti-

cally and horizontally.



Normal:

A 4:3 picture is displayed normally, without changing its

proportion.

You cannot operate this function while driving.

p Different settings can be stored for each video source.

p When a video is viewed in a wide screen mode that does not

match its original aspect ratio, it may appear different.

p The video image will appear coarser when viewed in “Zoom”

mode.

 Auto (default): Adjusts the video signal setting

automatically.



PAL: Sets the video signal to PAL.

 NTSC: Sets the video signal to NTSC.

 PAL-M: Sets the video signal to PAL-M.

 PAL-N: Sets the video signal to PAL-N.

 SECAM: Sets the video signal to SECAM.

Registering your favorite menu items in shortcuts allows you to

quickly jump to the registered menu screen by a simple touch on

the “Favorites” screen.

Up to 12 menu items can be registered in the favorite menu.

Creating a shortcut

1 Display the “Settings” screen.

2 Touch the star icon of the menu item that you

want to add to the favorite menu.

The star icon for the selected menu is filled in.

 To cancel the registration, touch the star icon in

the menu column again.

Selecting a shortcut

1 Display the “Favorites” screen.

2 Touch the desired menu item.

Removing a shortcut

1 Display the “Favorites” screen.

2 Touch and hold the favorite menu column you

want to remove.

The selected menu item is removed from the “Favorites” screen.

 You can also remove a shortcut by touching the

star icon in the registered menu column.

AUX

4821

Full

6/10

1 Clock display

Displays the time and date setting screen

 Setting the time and date on page 30

2 Screen display mode key

Changes the wide screen mode

 Changing the wide screen mode on page 30

Setting the time and date

1 Touch the current time on the screen.

2 Touch

or to set the correct time and

date.

You can operate the following items: Year, month, date, hour,

minute.

You can change the time display format to “12hour” (default)

or “24hour”.

You can change the order of date display format: Day-month-

year, Month-day-year.

Changing the wide screen

mode

You can set the screen size for the video and JPEG/BMP images.

p The default setting is “Full”, and for JPEG/BMP images is

“Normal”.

When there are touch panel keys on the screen, images are

displayed with the “Full” mode regardless of your setting.

1 Touch the screen display mode key.

p The appearance of this key changes according to the current

setting.

Favorite menuCommon operations

30 < QRD3356-A >< QRD3356-A >

Setting up the

video player

Favorite menu Common

operations

Common

operations

2 Touch the desired mode.

 Full:

A 4:3 picture is enlarged in the horizontal direction only,

enabling you to enjoy an image without any omissions.



Zoom:

A 4:3 picture is enlarged in the same proportion both verti-

cally and horizontally.



Normal:

A 4:3 picture is displayed normally, without changing its

proportion.

You cannot operate this function while driving.

p Different settings can be stored for each video source.

p When a video is viewed in a wide screen mode that does not

match its original aspect ratio, it may appear different.

p The video image will appear coarser when viewed in “Zoom”

mode.

Resetting various settings/

Restoring this product to the

default settings

You can restore settings or recorded content to the default set-

tings. Various methods are used to clear user data.

Method 1: Remove the vehicle battery

Resets various settings registered to this product.

p The settings configured on the “Theme” screen are not

reset.

Method 2: Initialize from the “System” menu

Method 3: Press the RESET button

 Resetting the microprocessor on page 6

Restoring the default settings

p This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

CAUTION

Do not turn off the engine while restoring the settings.

1 Display the “System” setting screen.

2 Touch [Restore Settings].

A message confirming whether to initialize the settings appears.

3 Touch [Restore].

p The source is turned off and the Bluetooth connection is

disconnected before the process starts.

Precautions

Your new product and this manual

 Do not operate this product, any applications, or the rear

view camera option (if purchased) if doing so will divert your

attention in any way from the safe operation of your vehicle.

Always observe safe driving rules and follow all existing

traffic regulations. If you experience difficulty in operating

this product or reading the display, park your vehicle in a

safe location and apply the parking brake before making the

necessary adjustments.



Do not install this product where it may (i) obstruct the

driver’s vision, (ii) impair the performance of any of the

vehicle’s operating systems of safety features, including

airbags, hazard lamp buttons, or (iii) impair the driver’s abil-

ity to safely operate the vehicle. In some cases, it may not be

possible to install this product because of the vehicle type or

the shape of the vehicle interior.

Important safeguards

WARNING

Pioneer does not recommend that you install this

product yourself. This product is designed for

professional installation only. We recommend that only

authorized Pioneer service personnel, who have special

training and experience in mobile electronics, set up and

install this product. NEVER SERVICE THIS PRODUCT

YOURSELF. Installing or servicing this product and its

connecting cables may expose you to the risk of electric

shock or other hazards, and can cause damage to this

product that is not covered by warranty.

Precautions before connecting

the system

WARNING

Do not take any steps to tamper with or disable the

parking brake interlock system which is in place for your

protection. Tampering with or disabling the parking

brake interlock system could result in serious injury or

death.

Other functionsConnection

AUX

4821

Full

6/10

1 Clock display

Displays the time and date setting screen

 Setting the time and date on page 30

2 Screen display mode key

Changes the wide screen mode

 Changing the wide screen mode on page 30

Setting the time and date

1 Touch the current time on the screen.

2 Touch or to set the correct time and

date.

You can operate the following items: Year, month, date, hour,

minute.

You can change the time display format to “12hour” (default)

or “24hour”.

You can change the order of date display format: Day-month-

year, Month-day-year.

Changing the wide screen

mode

You can set the screen size for the video and JPEG/BMP images.

p The default setting is “Full”, and for JPEG/BMP images is

“Normal”.

When there are touch panel keys on the screen, images are

displayed with the “Full” mode regardless of your setting.

1 Touch the screen display mode key.

p The appearance of this key changes according to the current

setting.

Common operations

31< QRD3356-A >

Common

operations

Common

operations

Other functions Connection

Power cord

1 To power supply

2 Power cord

3 Yellow

To terminal supplied with power regardless of ignition switch

position.

Red

To electric terminal controlled by ignition switch (12 V DC)

ON/OFF.

Orange/white

To lighting switch terminal.

Black (ground)

To vehicle (metal) body.

Violet/white

Of the two lead wires connected to the back lamp, connect

the one in which the voltage changes when the gear shift

is in the REVERSE (R) position. This connection enables

the unit to sense whether the car is moving forwards or

backwards.

Blue/white

Connect to system control terminal of the power amp (max.

300 mA 12 V DC).

Light green

Used to detect the ON/OFF status of the parking brake. This

CAUTION

 Secure all wiring with cable clamps or electrical tape.

Do not allow any bare wiring to remain exposed.



Do not directly connect the yellow lead of this product

to the vehicle battery. If the lead is directly connected

to the battery, engine vibration may eventually cause

the insulation to fail at the point where the wire

passes from the passenger compartment into the

engine compartment. If the yellow lead’s insulation

tears as a result of contact with metal parts, short-

circuiting can occur, resulting in considerable danger.



It is extremely dangerous to allow cables to become

wound around the steering column or shift lever. Be

sure to install this product, its cables, and wiring

away in such so that they will not obstruct or hinder

driving.



Make sure that the cables and wires will not interfere

with or become caught in any of the vehicle’s moving

parts, especially the steering wheel, shift lever,

parking brake, sliding seat tracks, doors, or any of the

vehicle’s controls.



Do not route wires where they will be exposed to

high temperatures. If the insulation heats up, wires

may become damaged, resulting in a short circuit or

malfunction and permanent damage to the product.



Do not shorten any leads. If you do, the protection

circuit (fuse holder, fuse resistor or filter, etc.) may

fail to work properly.



Never feed power to other electronic products by

cutting the insulation of the power supply lead of

this product and tapping into the lead. The current

capacity of the lead will be exceeded, causing

overheating.

Before installing this product

 Use this unit with a 12-volt battery and negative grounding

only. Failure to do so may result in a fire or malfunction.

 To avoid shorts in the electrical system, be sure to discon-

nect the (–) battery cable before installation.

To prevent damage

WARNING

 Use speakers over 50 W (output value) and between

4Ωto8Ω(impedancevalue).Donotuse1Ωto3Ω

speakers for this unit.

 The black cable is ground. When installing this unit

or power amp (sold separately), make sure to connect

the ground wire first. Ensure that the ground wire is

properly connected to metal parts of the car’s body.

The ground wire of the power amp and the one of this

unit or any other device must be connected to the car

separately with different screws. If the screw for the

ground wire loosens or falls out, it could result in fire

generation of smoke or malfunction.

Ground wire

Metal parts of car’

s body

POWER AMP

Other devices

(Another electr

onic

device in the car)

 When replacing the fuse, be sure to only use a fuse of

the rating prescribed on this product.



This product cannot be installed in a vehicle without ACC

(accessory) position on the ignition switch.

ACC position No ACC position

 To avoid short-circuiting, cover the disconnected lead with

insulating tape. It is especially important to insulate all

unused speaker leads, which if left uncovered may cause a

short circuit.



For connecting a power amp or other devices to this product,

refer to the manual for the product to be connected.

Notice for the blue/white lead

 When the ignition switch is turned on (ACC ON), a control

signal is output through the blue/white lead. Connect to an

external power amp’s system remote control terminal, the

auto-antenna relay control terminal, or the antenna booster

power control terminal (max. 300 mA 12 V DC). The control

signal is output through the blue/white lead, even if the

audio source is switched off.

This product

3 4 5 67 8

1 Microphone 4 m (13 ft. 1 in.)

(AVH-280BT)

2 This product

3 Antenna jack

4 Wired remote input

Hard-wired remote control adapter can be connected (sold

separately).

Power supply

6 Fuse (10 A)

7 Front output

8 Rear output or subwoofer output

32 < QRD3356-A >< QRD3356-A >

Connection Connection

Power cord

1 To power supply

2 Power cord

3 Yellow

To terminal supplied with power regardless of ignition switch

position.

Red

To electric terminal controlled by ignition switch (12 V DC)

ON/OFF.

Orange/white

To lighting switch terminal.

Black (ground)

To vehicle (metal) body.

Violet/white

Of the two lead wires connected to the back lamp, connect

the one in which the voltage changes when the gear shift

is in the REVERSE (R) position. This connection enables

the unit to sense whether the car is moving forwards or

backwards.

Blue/white

Connect to system control terminal of the power amp (max.

300 mA 12 V DC).

Light green

Used to detect the ON/OFF status of the parking brake. This

lead must be connected to the power supply side of the

parking brake switch.

Power supply side

b Parking brake switch

c Ground side

Parking Brake

1 If “Light green” cable is connected to parking

brake switch, video image on the display will

be controlled by this function.

2 The monitor displays the black screen with

warning information to prevent the driver

watching video contents during driving.

Speaker leads

















Perform these connections when using a subwoofer without the

optional amplifier.













h i

1 To power supply

2 Power cord

3 Left

4 Right

5 Front speaker

6 Rear speaker

7 White

8 White/black

9 Gray

a Gray/black

b Green

c Green/black

d Violet

e Violet/black

f Subwoofer(4Ω)

g Whenusingasubwooferof70W(2Ω),besuretoconnect

the subwoofer to the violet and violet/black leads of this unit.

Do not connect anything to the green and green/black leads.

Not used.

i Subwoofer(4Ω)×2

When a subwoofer is connected to this product instead of

a rear speaker, change the rear output setting in the initial

setting. The subwoofer output of this product is monaural.



Switching the rear speaker output on page 26

With a two-speaker system, do not connect anything to the

speaker leads that are not connected to speakers.

Notice for the blue/white lead

 When the ignition switch is turned on (ACC ON), a control

signal is output through the blue/white lead. Connect to an

external power amp’s system remote control terminal, the

auto-antenna relay control terminal, or the antenna booster

power control terminal (max. 300 mA 12 V DC). The control

signal is output through the blue/white lead, even if the

audio source is switched off.

This product

3 4 5 67 8

1 Microphone 4 m (13 ft. 1 in.)

(AVH-280BT)

2 This product

3 Antenna jack

4 Wired remote input

Hard-wired remote control adapter can be connected (sold

separately).

Power supply

6 Fuse (10 A)

7 Front output

8 Rear output or subwoofer output

33< QRD3356-A >

Connection Connection

1 Rear view camera (ND-BC8) (sold separately)

2 To video output

3 RCA cable (supplied with ND-BC8)

4 This product

5 Brown (R.C IN)

6 Power supply

7 Power cord

8 Violet/white (REVERSE-GEAR SIGNAL INPUT)

 Power cord on page 33

Connect only the rear view camera to R.C IN. Do not connect

any other equipment.

Some appropriate settings are required to use other view

cameras.

 Setting the rear view camera on page 23

Power amp (sold separately)

Without internal amp

Important

The speaker leads are not used when this connection is in

use.

















With internal amp

Important

Front speaker and Rear speaker signals are output from the

speaker leads when this connection is in use.









1 System remote control

Connect to Blue/white cable.

2 Power amp (sold separately)

3 Connect with RCA cable (sold separately)

4 To Rear or subwoofer output

Connect a cable according to the preout setting.

Rear speaker or subwoofer

6 To Front output

7 Front speaker

8 Subwoofer

You can change the RCA output of the subwoofer depending

on your subwoofer system.

The subwoofer output of this product is monaural.

iPod / iPhone

For details on how to connect an external device using a

separately sold cable, refer to the manual for the cable.

For details concerning the connection, operations and

compatibility of iPhone, refer to Setup for iPod on page 14.

iPod / iPhone with Lightning

connector

Connecting via the USB port

The USB interface cable for iPod / iPhone (CD-IU52) (sold sepa-

rately) is required for the connection.

1 USB port

2 USB cable 1.5 m (4 ft. 11 in.)

3 USB interface cable for iPod / iPhone (CD-IU52) (sold

separately)

4 iPhone with Lightning connector

iPod / iPhone with 30-pin

connector

Connecting via the AUX input

The USB interface cable for iPod / iPhone (CD-IU201V) (sold

separately) is required for the connection.

1 USB port

2 AUX input

3 USB cable 1.5 m (4 ft. 11 in.)

4 USB interface cable for iPod / iPhone (CD-IU201V) (sold

separately)

5 iPhone with 30-pin connector

Camera

About rear view camera

When you use the rear view camera, the rear view image is

automatically switched from the video by moving the shift lever

to REVERSE (R). Rear View mode also allows you to check

what is behind you while driving.

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR

VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR

DAMAGE.

CAUTION

 The screen image may appear reversed.

 With the rear view camera you can keep an eye on

trailers, or back into a tight parking spot. Do not use for

entertainment purposes.



Objects in rear view may appear closer or more distant

than in reality.

 The image area of full-screen images displayed while

backing or checking the rear of the vehicle may differ

slightly.

34 < QRD3356-A >< QRD3356-A >

Connection Connection

1 Rear view camera (ND-BC8) (sold separately)

2 To video output

3 RCA cable (supplied with ND-BC8)

4 This product

5 Brown (R.C IN)

6 Power supply

7 Power cord

8 Violet/white (REVERSE-GEAR SIGNAL INPUT)

 Power cord on page 33

Connect only the rear view camera to R.C IN. Do not connect

any other equipment.

Some appropriate settings are required to use other view

cameras.

 Setting the rear view camera on page 23

External video component and

the display

1 Rear display with RCA input jacks

2 To video input

3 RCA cables (sold separately)

4 This product

5 Yellow (V OUT)

6 AUX input

7 Mini-jack AV cable (CD-RM10) (sold separately)

8 Yellow

9 Red, white

a To Yellow

b To Red, white

c To video output

d To audio outputs

e External video component (sold separately)

The appropriate setting is required to use the external video

component.

 AUX source on page 23

WARNING

NEVER install the rear display in a location that enables

the driver to watch the video source while driving.

This product’s rear video output is for connection of a display

to enable passengers in the rear seats to watch the video

source.

1 USB port

2 AUX input

3 USB cable 1.5 m (4 ft. 11 in.)

4 USB interface cable for iPod / iPhone (CD-IU201V) (sold

separately)

5 iPhone with 30-pin connector

Camera

About rear view camera

When you use the rear view camera, the rear view image is

automatically switched from the video by moving the shift lever

to REVERSE (R). Rear View mode also allows you to check

what is behind you while driving.

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR

VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR

DAMAGE.

CAUTION

 The screen image may appear reversed.

 With the rear view camera you can keep an eye on

trailers, or back into a tight parking spot. Do not use for

entertainment purposes.



Objects in rear view may appear closer or more distant

than in reality.

 The image area of full-screen images displayed while

backing or checking the rear of the vehicle may differ

slightly.

35< QRD3356-A >

Connection Connection

1 Microphone lead

2 Groove

2 Attach the microphone clip to the sun visor.

1 Microphone clip

2 Clamps

Use separately sold clamps to secure the lead where neces-

sary inside the vehicle.

Install the microphone on the sun visor when it is in the up

position. It cannot recognize the driver’s voice if the sun visor is

in the down position.

Installation on the steering

column

1 Detach the microphone base from the micro-

phone clip by sliding the microphone base

while pressing the tab.

Precautions before installation

CAUTION

Never install this product in places where, or in a manner

that:



Could injure the driver or passengers if the vehicle

stops suddenly.



May interfere with the driver’s operation of the

vehicle, such as on the floor in front of the driver’s

seat, or close to the steering wheel or shift lever.



To ensure proper installation, be sure to use the

supplied parts in the manner specified. If any parts

are not supplied with this product, use compatible

parts in the manner specified after you have the parts’

compatibility checked by your dealer. If parts other

than supplied or compatible ones are used, they may

damage internal parts of this product or they may

work loose and the product may become detached.



Do not install this product where it may (i) obstruct

the driver’s vision, (ii) impair the performance of any

of the vehicle’s operating systems or safety features,

including airbags, hazard lamp buttons or (iii) impair

the driver’s ability to safely operate the vehicle.



Never install this product in front of or next to the

place in the dashboard, door, or pillar from which one

of your vehicle’s airbags would deploy. Please refer

to your vehicle’s owner’s manual for reference to the

deployment area of the frontal airbags.

Before installing

 Consult with your nearest dealer if installation requires drill-

ing holes or other modifications of the vehicle.



Before making a final installation of this product, temporar-

ily connect the wiring to confirm that the connections are

correct and the system works properly.

Installation notes

 Do not install this product in places subject to high tempera-

tures or humidity, such as:



Places close to a heater, vent or air conditioner.

 Places exposed to direct sunlight, such as on top of the

dashboard.

 Places that may be exposed to rain, such as close to the door

or on the vehicle’s floor.

 Install this product horizontally on a surface within 0 to

30 degrees tolerance (within 5 degrees to the left or right).

Improper installation of the unit with the surface tilted more

than these tolerances increases the potential for errors in

the vehicle’s location display, and might otherwise cause

reduced display performance.

30°

 When installing, to ensure proper heat dispersal when using

this unit, make sure you leave ample space behind the rear

panel and wrap any loose cables so they are not blocking the

vents.

Leave ample

space

5 cm

Installation using the screw

holes on the side of this

product

1 Fastening this product to the factory radio-

mounting bracket.

Position this product so that its screw holes are aligned with

the screw holes of the bracket, and tighten the screws at three

locations on each side.

Useeitherthetrussheadscrews(5mm×9mm)orflush

surfacescrews(5mm×9mm),dependingontheshapeofthe

bracket’s screw holes.

1 Factory radio-mounting bracket

2 If the pawl interferes with installation, you may bend it down

out of the way.

3 Dashboard or console

4 Truss head screw or flush surface screw

Be sure to use the screws supplied with this product.

Installing the microphone

280BT

 Install the microphone in a place where its direction and dis-

tance from the driver make it easiest to pick up the driver’s

voice.



Be sure to turn off (ACC OFF) the product before connecting

the microphone.

Mounting on the sun visor

1 Fit the microphone lead into the groove.

Installation

36 < QRD3356-A >< QRD3356-A >

Installation Installation

1 Microphone lead

2 Groove

2 Attach the microphone clip to the sun visor.

1 Microphone clip

2 Clamps

Use separately sold clamps to secure the lead where neces-

sary inside the vehicle.

Install the microphone on the sun visor when it is in the up

position. It cannot recognize the driver’s voice if the sun visor is

in the down position.

Installation on the steering

column

1 Detach the microphone base from the micro-

phone clip by sliding the microphone base

while pressing the tab.

1 Tab

2 Microphone base

2 Mount the microphone on the steering column.

1 Double-sided tape

2 Clamps

Use separately sold clamps to secure the lead where neces-

sary inside the vehicle.

3 Keeping it away from the steering wheel.

Adjusting the microphone

angle

Troubleshooting

If you have problems operating this product, refer to this sec-

tion. The most common problems are listed below, along with

likely causes and solutions. If a solution to your problem cannot

be found here, contact your dealer or the nearest authorized

Pioneer service facility.

Problems with the AV screen

CD or DVD playback is not possible.

 The disc is inserted upside down.

— Insert the disc with the label upward.

 The disc is dirty.

— Clean the disc.

 The disc is cracked or otherwise damaged.

— Insert a normal, round disc.

 The files on the disc are in an irregular file format.

— Check the file format.

 The disc format cannot be played back.

— Replace the disc.

 The loaded disc is a type this product cannot play.

— Check what type of disc it is.

The screen is covered by a caution message and the video

cannot be shown.

 The parking brake lead is not connected or applied.

— Connect the parking brake lead correctly, and apply the

parking brake.

 The parking brake interlock is activated.

— Park your vehicle in a safe place and apply the parking

brake.

The audio or video skips.

 This product is not firmly secured.

— Secure this product firmly.

No sounds are produced. The volume level will not rise.

 Cables are not connected correctly.

— Connect the cables correctly.

 The system is performing still, slow motion, or frame-by-

frame playback with DVD-Video.

— There is no sound during still, slow motion, or frame-by-

frame playback with DVD-Video.

 The system is paused or performing, fast reverse or forward

during the disc playback.

— For the media other than music CD (CD-DA), there is no

sound on fast reverse or forward.

Appendix

1 Factory radio-mounting bracket

2 If the pawl interferes with installation, you may bend it down

out of the way.

3 Dashboard or console

4 Truss head screw or flush surface screw

Be sure to use the screws supplied with this product.

Installing the microphone

280BT

 Install the microphone in a place where its direction and dis-

tance from the driver make it easiest to pick up the driver’s

voice.



Be sure to turn off (ACC OFF) the product before connecting

the microphone.

Mounting on the sun visor

1 Fit the microphone lead into the groove.

37< QRD3356-A >

Installation Installation Appendix

Disc

Error-02-XX/FF-FF

 The disc is dirty.

— Clean the disc.

 The disc is scratched.

— Replace the disc.

 The disc is loaded upside down.

— Check that the disc is loaded correctly.

 There is an electrical or mechanical error.

— Press the RESET button.

Different Region Disc

 The disc does not have the same region number as this

product.

— Replace the DVD with one bearing the correct region

number.

Unplayable Disc

 This type of disc cannot be played on this product.

— Replace the disc with one that can be played on this

product.

Unplayable File

 This type of file cannot be played on this product.

— Select a file that can be played.

Skipped

 The inserted disc contains DRM protected files.

— The protected files are skipped.

Protect

 All the files on the inserted disc are embedded with DRM.

— Replace the disc.

TEMP

 The temperature of this product is outside the normal operat-

ing range.

— Wait until this product returns to a temperature within the

normal operating limits.

This DivX rental has expired.

 The inserted disc contains expired DivX VOD content.

— Select a file that can be played.

Video resolution not supported

 Files that cannot be played on this product are included in

the file.

— Select a file that can be played.

Unable to write to ash memory.

 The playback history for VOD contents cannot be saved for

some reason.

— Retry.

— If the message appears frequently, consult your dealer.

The icon  is displayed, and operation is impossible.

 The operation is not compatible with the video configuration.

— This operation is not possible. (For example, the DVD

playing does not feature that angle, audio system, subtitle

language, etc.)

The picture stops (pauses) and this product cannot be

operated.

 The reading of data is impossible during disc playback.

— Stop playback once, then restart.

The picture is stretched, with an incorrect aspect ratio.

 The aspect setting is incorrect for the display.

— Select the appropriate setting for that image.

A parental lock message is displayed and DVD playback

is not possible.

 The parental lock is on.

— Turn the parental lock off or change the level.

The parental lock for DVD playback cannot be canceled.

 The code number is incorrect.

— Input the correct code number.

Playback is not with the audio language and subtitle

language settings selected in “DVD/DivX Setup”.

 The DVD playing does not feature dialog or subtitles in the

language selected in “DVD/DivX Setup”.

— Switching to a selected language is not possible if the

language selected in “DVD/DivX Setup” is not recorded

on the disc.

The picture is extremely unclear/distorted and dark during

playback.

 The disc features a signal to prohibit copying. (Some discs

may have this.)

— Since this product is compatible with the copy guard

analog copy protect system, the picture may suffer from

horizontal stripes or other imperfections when a disc with

that kind of protection signal is viewed on some displays.

This is not a malfunction.

iPod cannot be operated.

 The iPod is frozen.

— Reconnect the iPod with the USB interface cable for iPod /

iPhone.

— Update the iPod software version.

 An error has occurred.

— Reconnect the iPod with the USB interface cable for iPod /

iPhone.

— Park your vehicle in a safe place, and turn off the engine.

Turn the ignition key back to off (ACC OFF). Then restart

the engine, and turn the power to this product back on.

— Update the iPod software version.

 Cables are not connected correctly.

— Connect the cables correctly.

Problems with the phone screen

Dialing is impossible because the touch panel keys for

dialing are inactive.

 Your phone is out of range for service.

— Retry after re-entering the range for service.

 The connection between the cellular phone and this product

cannot be established now.

— Perform the connection process.

Problems with the Application screen

A black screen is displayed.

 While operating an application, the application was ended

on the smartphone side.

— Press

to display the Top menu screen.

 The smartphone OS may be awaiting screen operation.

— Stop the vehicle in a safe place and check the screen on

the smartphone.

The screen is displayed, but operation does not work at all.

 An error has occurred.

— Park your vehicle in a safe place, and then turn off the

ignition switch (ACC OFF). Subsequently, turn the ignition

switch to on (ACC ON) again.

The smartphone was not charged.

 Charging stopped because the temperature of the smart-

phone rose due to prolonged use of the smartphone during

charging.

— Disconnect the smartphone from the cable, and wait until

the smartphone cools down.

 More battery power was consumed than was gained from

charging.

— This problem may be resolved by stopping any unneces-

sary services on the smartphone.

Error messages

When problems occur with this product, an error message

appears on the display. Refer to the table below to identify the

problem, then take the suggested corrective action. If the error

persists, record the error message and contact your dealer or

your nearest Pioneer service center.

Common

AMP Error

 This product fails to operate or the speaker connection is

incorrect; the protective circuit is activated.

— Check the speaker connection. If the message fails to

disappear even after the engine is switched off/on, contact

your dealer or an authorized Pioneer Service Station for

assistance.

Product overheat. System will be shut down automatically

in 1 minute. Restart the product by ACC Off/On may x this

problem. If this message keep showing up, it is possible

that some problem occurred in the product.

 The temperature is too high for this product to operate.

— Follow the instructions displayed on the screen. If this

does not solve the problem, contact your dealer or an

authorized Pioneer Station for assistance.

38 < QRD3356-A >< QRD3356-A >

Appendix Appendix

Disc

Error-02-XX/FF-FF

 The disc is dirty.

— Clean the disc.

 The disc is scratched.

— Replace the disc.

 The disc is loaded upside down.

— Check that the disc is loaded correctly.

 There is an electrical or mechanical error.

— Press the RESET button.

Different Region Disc

 The disc does not have the same region number as this

product.

— Replace the DVD with one bearing the correct region

number.

Unplayable Disc

 This type of disc cannot be played on this product.

— Replace the disc with one that can be played on this

product.

Unplayable File

 This type of file cannot be played on this product.

— Select a file that can be played.

Skipped

 The inserted disc contains DRM protected files.

— The protected files are skipped.

Protect

 All the files on the inserted disc are embedded with DRM.

— Replace the disc.

TEMP

 The temperature of this product is outside the normal operat-

ing range.

— Wait until this product returns to a temperature within the

normal operating limits.

This DivX rental has expired.

 The inserted disc contains expired DivX VOD content.

— Select a file that can be played.

Video resolution not supported

 Files that cannot be played on this product are included in

the file.

— Select a file that can be played.

Unable to write to ash memory.

 The playback history for VOD contents cannot be saved for

some reason.

— Retry.

— If the message appears frequently, consult your dealer.

Your device is not authorized to play this DivX protected

video.

 This product’s DivX registration code has not been autho-

rized by the DivX VOD contents provider.

— Register this product to the DivX VOD contents provider.

Video frame rate not supported

 DivX file’s frame rate is more than 30 fps.

— Select a file that can be played.

Audio Format not supported

 This type of file is not supported on this product.

— Select a file that can be played.

USB storage device

Error-02

 Communication failed.

— Turn the ignition switch OFF and back ON.

— Disconnect the USB storage device.

— Change to a different source. Then, return to the USB

storage device.

Unplayable File

 This type of file cannot be played on this product.

— Select a file that can be played.

 Security for the connected USB storage device is enabled.

— Follow the USB storage device instructions to disable

security.

Skipped

 The connected USB storage device contains DRM protected

files.

— The protected files are skipped.

Protect

 All the files on the connected USB storage device are

embedded with DRM.

— Replace the USB storage device.

Incompatible USB

 The connected USB storage device is not supported by this

product.

— Disconnect your device and replace it with a compatible

USB storage device.

Check USB

 The USB connector or USB cable is short-circuited.

— Check that the USB connector or USB cable is not caught

in something or damaged.

 The connected USB storage device consumes more than

maximum allowable current.

— Disconnect the USB storage device and do not use it. Turn

the ignition switch to OFF, then to ACC or ON and then

connect a compliant USB storage device.

Video resolution not supported

 Files that cannot be played on this product are included in

the file.

— Select a file that can be played.

USB was disconnected for device protection. Do not re-

insert this USB memory into the unit. Please restart the

unit.

 The USB connector or USB cable is short-circuited.

— Check that the USB connector or USB cable is not caught

in something or damaged.

 The connected USB storage device consumes more than

maximum allowable current.

— Disconnect the USB storage device and do not use it. Turn

the ignition switch to OFF, then to ACC or ON and then

connect a compliant USB storage device.



The USB interface cable for iPod / iPhone is short-circuited.

— Confirm that the USB interface cable for iPod / iPhone or

USB cable is not caught in something or damaged.

Audio Format not supported

 This type of file is not supported on this product.

— Select a file that can be played.

iPod

Error-02-6X

 iPod failure.

— Disconnect the cable from the iPod. Once the iPod’s main

menu is displayed, reconnect the iPod and reset it.

Error-02-60

 The iPod firmware version is old.

— Update the iPod version.

Bluetooth

Error-10

 The power failed for the Bluetooth module of this product.

— Turn the ignition switch to OFF and then to ON.

If the error message is still displayed after performing the

above action, please contact your dealer or an authorized

Pioneer Service Station.

Handling and care of discs

Some basic precautions are necessary when handling your

discs.

The screen is displayed, but operation does not work at all.

 An error has occurred.

— Park your vehicle in a safe place, and then turn off the

ignition switch (ACC OFF). Subsequently, turn the ignition

switch to on (ACC ON) again.

The smartphone was not charged.

 Charging stopped because the temperature of the smart-

phone rose due to prolonged use of the smartphone during

charging.

— Disconnect the smartphone from the cable, and wait until

the smartphone cools down.

 More battery power was consumed than was gained from

charging.

— This problem may be resolved by stopping any unneces-

sary services on the smartphone.

Error messages

When problems occur with this product, an error message

appears on the display. Refer to the table below to identify the

problem, then take the suggested corrective action. If the error

persists, record the error message and contact your dealer or

your nearest Pioneer service center.

Common

AMP Error

 This product fails to operate or the speaker connection is

incorrect; the protective circuit is activated.

— Check the speaker connection. If the message fails to

disappear even after the engine is switched off/on, contact

your dealer or an authorized Pioneer Service Station for

assistance.

Product overheat. System will be shut down automatically

in 1 minute. Restart the product by ACC Off/On may x this

problem. If this message keep showing up, it is possible

that some problem occurred in the product.

 The temperature is too high for this product to operate.

— Follow the instructions displayed on the screen. If this

does not solve the problem, contact your dealer or an

authorized Pioneer Station for assistance.

39< QRD3356-A >

Appendix Appendix

DVD-R/DVD-RW/DVD-R SL (Single

Layer)/DVD-R DL (Dual Layer) discs

 Unfinalized discs which have been recorded with the Video

format (video mode) cannot be played back.

 Discs which have been recorded with the Video Recording

format (VR mode) cannot be played back.

 DVD-R DL (Dual Layer) discs which have been recorded with

Layer Jump recording cannot be played back.

 For detailed information about recording mode, please

contact the manufacturer of media, recorders, or writing

software.

CD-R/CD-RW discs

 Unfinalized discs cannot be played back.

 It may not be possible to playback CD-R/CD-RW discs

recorded on a music CD recorder or a computer because

of disc characteristics, scratches or dirt on the disc, or dirt,

scratches or condensation on the lens of the built-in drive.



Playback of discs recorded on a computer may not be pos-

sible, depending on the recording device, writing software,

their settings, and other environmental factors.



Please record with the correct format. (For details, please

contact manufacturer of media, recorders, or writing

software.)



Titles and other text information recorded on a CD-R/CD-RW

disc may not be displayed by this product (in the case of

audio data (CD-DA)).



Read the precautions with CD-R/CD-RW discs before using

them.

Common notes about the USB storage

device

 Do not leave the USB storage device in any location with

high temperatures.

 Depending on the kind of the USB storage device you use,

this product may not recognize the storage device or files

may not be played back properly.



The text information of some audio and video files may not

be correctly displayed.

 File extensions must be used properly.

 There may be a slight delay when starting playback of files

on an USB storage device with complex folder hierarchies.

 Operations may vary depending on the kind of an USB stor-

age device.



It may not be possible to play some music files from USB

because of file characteristics, file format, recorded applica-

tion, playback environment, storage conditions, and so on.

Built-in drive and care

 Use only conventional, fully circular discs. Do not use

shaped discs.

 Do not use cracked, chipped, warped, or otherwise damaged

discs as they may damage the built-in drive.

 Use 12-cm discs. Do not use 8-cm discs or an adapter for

8-cm discs.

 When using discs that can be printed on label surfaces,

check the instructions and the warnings of the discs.

Depending on the discs, inserting and ejecting may not be

possible. Using such discs may result in damage to this

equipment.



Do not attach labels, write on or apply chemicals to the

surface of the discs.

 Do not attach commercially available labels or other materi-

als to the discs.



To clean a disc, wipe it with a soft cloth, moving outward

from the center.

 Condensation may temporarily impair the built-in drive’s

performance.

 Playback of discs may not be possible because of disc

characteristics, disc format, recorded application, playback

environment, storage conditions and so on.



Road shocks may interrupt disc playback.

 Read the precautions for discs before using them.

Ambient conditions for playing a disc

 At extremely high temperatures, a temperature cutout

protects this product by switching it off automatically.

 Despite our careful design of the product, small scratches

that do not affect actual operation may appear on the disc

surface as a result of mechanical wear, ambient conditions

for use or handling of the disc. This is not a sign of the

malfunction of this product. Consider it to be normal wear

and tear.

Playable discs

DVD-Video

 is a trademark of DVD Format/Logo Licensing

Corporation.

 It is not possible to play DVD-Audio discs. This DVD drive

may not be able to play all discs bearing the marks shown

above.

AVCHD recorded discs

This unit is not compatible with discs recorded in AVCHD

(Advanced Video Codec High Definition) format. Do not insert

AVCHD discs. If inserted, the disc may not be ejected.

Playing DualDisc

 DualDiscs are two-sided discs that have a recordable CD

for audio on one side and a recordable DVD for video on the

other.



Playback of the DVD side is possible with this product.

However, since the CD side of DualDiscs is not physically

compatible with the general CD standard, it may not be pos-

sible to play the CD side with this product.

 Frequent loading and ejecting of a DualDisc may result in

scratches to the disc.

 Serious scratches can lead to playback problems on this

product. In some cases, a DualDisc may become stuck

in the disc-loading slot and will not eject. To prevent this,

we recommend you refrain from using DualDisc with this

product.



Please refer to the manufacturer for more detailed informa-

tion about DualDiscs.

Dolby Digital

This product will down-mix Dolby Digital signals internally and

the sound will be output in stereo.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Detailed information for play-

able media

Compatibility

Common notes about disc

compatibility

 Certain functions of this product may not be available for

some discs.

 Compatibility with all discs is not guaranteed.

 It is not possible to playback DVD-ROM/DVD-RAM discs.

 Playback of discs may become impossible with direct expo-

sure to sunlight, high temperatures, or depending on the

storage conditions in the vehicle.

DVD-Video discs

 DVD-Video discs that have incompatible region numbers

cannot be played on this DVD drive. The region number of

the player can be found on this product’s chassis.

40 < QRD3356-A >< QRD3356-A >

Appendix Appendix

DVD-R/DVD-RW/DVD-R SL (Single

Layer)/DVD-R DL (Dual Layer) discs

 Unfinalized discs which have been recorded with the Video

format (video mode) cannot be played back.

 Discs which have been recorded with the Video Recording

format (VR mode) cannot be played back.

 DVD-R DL (Dual Layer) discs which have been recorded with

Layer Jump recording cannot be played back.

 For detailed information about recording mode, please

contact the manufacturer of media, recorders, or writing

software.

CD-R/CD-RW discs

 Unfinalized discs cannot be played back.

 It may not be possible to playback CD-R/CD-RW discs

recorded on a music CD recorder or a computer because

of disc characteristics, scratches or dirt on the disc, or dirt,

scratches or condensation on the lens of the built-in drive.



Playback of discs recorded on a computer may not be pos-

sible, depending on the recording device, writing software,

their settings, and other environmental factors.



Please record with the correct format. (For details, please

contact manufacturer of media, recorders, or writing

software.)



Titles and other text information recorded on a CD-R/CD-RW

disc may not be displayed by this product (in the case of

audio data (CD-DA)).



Read the precautions with CD-R/CD-RW discs before using

them.

Common notes about the USB storage

device

 Do not leave the USB storage device in any location with

high temperatures.

 Depending on the kind of the USB storage device you use,

this product may not recognize the storage device or files

may not be played back properly.



The text information of some audio and video files may not

be correctly displayed.

 File extensions must be used properly.

 There may be a slight delay when starting playback of files

on an USB storage device with complex folder hierarchies.

 Operations may vary depending on the kind of an USB stor-

age device.



It may not be possible to play some music files from USB

because of file characteristics, file format, recorded applica-

tion, playback environment, storage conditions, and so on.

USB storage device compatibility

 For details about USB storage device compatibility with this

product, refer to Specifications on page 45.

 Protocol: bulk

 You cannot connect a USB storage device to this product via

a USB hub.

 Partitioned USB storage device is not compatible with this

product.

 Firmly secure the USB storage device when driving. Do not

let the USB storage device fall onto the floor, where it may

become jammed under the brake or gas pedal.



There may be a slight delay when starting playback of audio

files encoded with image data.

 Some USB storage devices connected to this product may

generate noise on the radio.

 Do not connect anything other than the USB storage device.

The sequence of audio files on USB storage device

For USB storage device, the sequence is different from that of

USB storage device.

Handling guidelines and supplemental information



This product is not compatible with the Multi Media Card

(MMC).

 Copyright protected files cannot be played back.

Common notes about DivX les

Notes specific to DivX files

 Only DivX files downloaded from DivX partner sites are guar-

anteed for proper operation. Unauthorized DivX files may not

operate properly.



DRM rental files cannot be operated until playing back is

started.

 This product corresponds to a DivX file display of up to 1 590

minutes 43 seconds. Search operations beyond this time

limit are prohibited.



DivX VOD file playback requires supplying the ID code of this

product to the DivX VOD provider. Regarding the ID code,

refer to Displaying your DivX VOD registration code on page

29.



For details on the Divx video versions that can be played on

this product, refer to Specifications on page 45.

 For more details about DivX, visit the following site:

http://www.divx.com/

DivX subtitle files

 Srt format subtitle files with the extension “.srt” can be used.

 Only one subtitle file can be used for each DivX file. Multiple

subtitle files cannot be associated.

 Subtitle files that are named with the same character string

as the DivX file before the extension are associated with the

DivX file. The character strings before the extension must be

exactly the same. However, if there is only one DivX file and

one subtitle file in a single folder, the files are associated

even if the file names are not the same.



The subtitle file must be stored in the same folder as the

DivX file.

 Up to 255 subtitle files may be used. Any more subtitle files

will not be recognized.

 Up to 64 characters can be used for the name of the subtitle

file, including the extension. If more than 64 characters

are used for the file name, the subtitle file may not be

recognized.



The character code for the subtitle file should comply with

ISO-8859-1. Using characters other than ISO-8859-1 may

cause the characters to be displayed incorrectly.



The subtitles may not be displayed correctly if the displayed

characters in the subtitle file include control code.

 For materials that use a high transfer rate, the subtitles and

video may not be completely synchronized.

 If multiple subtitles are programed to display within a very

short time frame, such as 0.1 seconds, the subtitles may not

be displayed at the correct time.

Media compatibility chart

General

Maximum playback time of audio file stored in the disc: 60 h

Maximum playback time of audio file stored on an USB stor-

age device: 7.5 h (450 minutes)

CD-R/-RW

File system: ISO9660 level 1.ISO9660 level 2.Romeo, Joliet.UDF

1.02/1.50/2.00/2.01/2.50

Maximum number of folders: 300

Maximum number of files: 999

Playable file types: MP3, WMA, AAC, WAV, DivX, MPEG1,

MPEG2, MPEG4

DVD-R/-R SL/-R DL/ DVD-RW

File system: ISO9660 level 1.ISO9660 level 2.Romeo, Joliet.UDF

1.02/1.50/2.00/2.01/2.50

Maximum number of folders: 300

Maximum number of files: 3 500

Playable file types: MP3, WMA, AAC, WAV, DivX, MPEG1,

MPEG2, MPEG4

USB storage device

File system: FAT16/FAT32

Maximum number of folders: 300

Maximum number of files: 15 000

Playable file types: MP3, WMA, AAC, WAV, MPEG4, JPEG, BMP

 Frequent loading and ejecting of a DualDisc may result in

scratches to the disc.

 Serious scratches can lead to playback problems on this

product. In some cases, a DualDisc may become stuck

in the disc-loading slot and will not eject. To prevent this,

we recommend you refrain from using DualDisc with this

product.



Please refer to the manufacturer for more detailed informa-

tion about DualDiscs.

Dolby Digital

This product will down-mix Dolby Digital signals internally and

the sound will be output in stereo.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Detailed information for play-

able media

Compatibility

Common notes about disc

compatibility

 Certain functions of this product may not be available for

some discs.

 Compatibility with all discs is not guaranteed.

 It is not possible to playback DVD-ROM/DVD-RAM discs.

 Playback of discs may become impossible with direct expo-

sure to sunlight, high temperatures, or depending on the

storage conditions in the vehicle.

DVD-Video discs

 DVD-Video discs that have incompatible region numbers

cannot be played on this DVD drive. The region number of

the player can be found on this product’s chassis.

41< QRD3356-A >

Appendix Appendix

Maximum Frame rate: 30 fps

Files may not be able to be played back depending on the bit

rate.

Example of a hierarchy

This product assigns folder numbers. The user cannot

assign folder numbers.

notice

Redistribution and use in source and binary forms, with or

without modification, are permitted provided that the following

conditions are met:

1. Redistributions of source code must retain the above copy-

right notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copy-

right notice, this list of conditions and the following disclaimer

in the documentation and/or other materials provided with the

distribution.

3. All advertising materials mentioning features or use of this

software must display the following acknowledgement:

This product includes software developed by the University of

California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its con-

tributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND

CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE

MP3 compatibility

Ver. 2.x of ID3 tag is prioritized when both Ver. 1.x and Ver. 2.x

exist.

This product is not compatible with the following: MP3i (MP3

interactive), mp3 PRO, m3u playlist

CD-R/-RW

File extension: .mp3

Bit rate: 8 kbps to 320 kbps (CBR), VBR

Sampling frequency: 16 kHz to 48 kHz (32 kHz, 44.1 kHz,48 kHz

for emphasis)

ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3

DVD-R/-R SL/-R DL/ DVD-RW

File extension: .mp3

Bit rate: 8 kbps to 320 kbps (CBR), VBR

Sampling frequency: 16 kHz to 48 kHz (32 kHz, 44.1 kHz,48 kHz

for emphasis)

ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3

USB storage device

File extension: .mp3

Bit rate: 8 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz

ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3, 2.4

WMA compatibility

This product is not compatible with the following: Windows

Media™ Audio 9 Professional, Lossless, Voice

CD-R/-RW

File extension: .wma

Bit rate: 5 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz

DVD-R/-R SL/-R DL/ DVD-RW

File extension: .wma

Bit rate: 5 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz

USB storage device

File extension: .wma

Bit rate: 5 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz

WAV compatibility

The sampling frequency shown in the display may be

rounded.

USB storage device

File extension: .wav

Format: Linear PCM (LPCM)

Sampling frequency: 16 kHz to 48 kHz

Quantization bits: 8 bits and 16 bits

AAC compatibility

This product plays back AAC files encoded by iTunes.

CD-R/-RW

File extension: .m4a

Bit rate: 8 kbps to 320 kbps (CBR)

Sampling frequency: 8 kHz to 44.1 kHz

DVD-R/-R SL/-R DL/ DVD-RW

File extension: .m4a

Bit rate: 8 kbps to 320 kbps (CBR)

Sampling frequency: 8 kHz to 44.1 kHz

USB storage device

File extension: .m4a

Bit rate: 8 kbps to 320 kbps (CBR)

Sampling frequency: 8 kHz to 48 kHz

DivX compatibility

This product is not compatible with the following: DivX Ultra

format, DivX files without video data, DivX files encoded with

LPCM (Linear PCM) audio codec

Depending on the file information composition, such as the

number of audio streams, there may be a slight delay in the

start of playback on discs.

If a file contains more than 4 GB, playback stops before the

end.

Some special operations may be prohibited because of the

composition of DivX files.

Files with high transfer rates may not be played back cor-

rectly. The standard transfer rate is 4 Mbps for CDs and 10.08

Mbps for DVDs.

DivX files on the USB storage device cannot be played.

CD-R/-RW

File extension: .avi/.divx

Profile (DivX version): Home Theater Ver. 3.11/Ver. 4.x/Ver. 5.x/

Ver. 6.x

Compatible audio codec: MP3, Dolby Digital

Bit rate (MP3): 8 kbps to 320 kbps (CBR), VBR

Sampling frequency (MP3): 16 kHz to 48 kHz (32 kHz, 44.1 kHz,

48 kHz for emphasis)

Maximumimagesize:720pixels×576pixels

Maximum file size: 4 GB

DVD-R/-R SL/-R DL/ DVD-RW

File extension: .avi/.divx

Profile (DivX version): Home Theater Ver. 3.11/Ver. 4.x/Ver. 5.x/

Ver. 6.x

Compatible audio codec: MP3, Dolby Digital

Bit rate (MP3): 8 kbps to 320 kbps (CBR), VBR

Sampling frequency (MP3): 16 kHz to 48 kHz (32 kHz, 44.1 kHz,

48 kHz for emphasis)

Maximumimagesize:720pixels×576pixels

Maximum file size: 4 GB

Video les compatibility (USB)

Files may not be played back properly depending on the

environment in which the file was created or on the contents

of the file.

This product may not operate correctly, depending on the

application used to encode WMA files.

Depending on the version of Windows Media™ Player used

to encode WMA files, album names and other text informa-

tion may not be correctly displayed.

There may be a slight delay when starting playback of audio

files encoded with image data.

This product is not compatible with packet write data

transfer.

This product can recognize up to 32 characters, beginning

with the first character, including extension for the file and

folder name. Depending on the display area, this product

may try to display them with a reduced font size. However,

the maximum number of the characters that you can display

varies according to the width of each character, and of the

display area.

Folder selection sequence or other operations may be

altered, depending on the encoding or writing software.

Regardless of the length of blank section between the songs

of original recording, compressed audio discs play with a

short pause between songs.

.avi

Format: MPEG-4

Compatible video codec: MPEG-4

Compatible audio codec: Linear PCM(LPCM) MP3

Maximum resolution: 720 pixels x 480 pixels

Maximum Frame rate: 30 fps

Files may not be able to be played back depending on the bit

rate.

.mp4

Format: MPEG-4

Compatible video codec: MPEG-4

Compatible audio codec: AAC

Maximum resolution: 720 pixels x 480 pixels

Maximum Frame rate: 30 fps

Files may not be able to be played back depending on the bit

rate.

.mov

Format: MPEG-4

Compatible video codec: MPEG-4

Compatible audio codec: AAC/Linear PCM(LPCM) MP3

Maximum resolution: 720 pixels x 480 pixels

42 < QRD3356-A >< QRD3356-A >

Appendix Appendix

Maximum Frame rate: 30 fps

Files may not be able to be played back depending on the bit

rate.

Example of a hierarchy

This product assigns folder numbers. The user cannot

assign folder numbers.

notice

Redistribution and use in source and binary forms, with or

without modification, are permitted provided that the following

conditions are met:

1. Redistributions of source code must retain the above copy-

right notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copy-

right notice, this list of conditions and the following disclaimer

in the documentation and/or other materials provided with the

distribution.

3. All advertising materials mentioning features or use of this

software must display the following acknowledgement:

This product includes software developed by the University of

California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its con-

tributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND

CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE

Bluetooth

The Bluetooth

word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by

PIONEER CORPORATION is under license. Other trademarks

and trade names are those of their respective owners.

WMA

Windows Media is either a registered trademark or trademark

of Microsoft Corporation in the United States and/or other

countries.

This product includes technology owned by Microsoft

Corporation and cannot be used or distributed without a license

from Microsoft Licensing, Inc.

DivX

DivX Certified

devices have been tested for high-quality DivX

(.divx, .avi) video playback. When you see the DivX logo, you

know you have the freedom to play your favorite DivX movies.

DivX

, DivX Certified

and associated logos are trademarks of

DivX, LLC and are used under license.

This DivX Certified

device has passed rigorous testing to ensure

it plays DivX

video.

To play purchased DivX movies, first register your device at vod.

divx.com. Find your registration code in the DivX VOD section of

your device setup menu.



Displaying your DivX VOD registration code on page 29

AAC

AAC is short for Advanced Audio Coding and refers to an audio

compression technology standard used with MPEG-2 and

MPEG-4. Several applications can be used to encode AAC files,

but file formats and extensions differ depending on the applica-

tion which is used to encode. This unit plays back AAC files

encoded by iTunes.

Detailed information regarding

connected iPod devices

 Pioneer accepts no responsibility for data lost from an

iPod, even if that data is lost while using this product.

Please back up your iPod data regularly.



Do not leave the iPod in direct sunlight for extended

amounts of time. Extended exposure to direct sunlight

can result in iPod malfunction due to the resulting high

temperature.



Do not leave the iPod in any location with high

temperatures.

 Firmly secure the iPod when driving. Do not let the iPod

fall onto the floor, where it may become jammed under the

brake or gas pedal.



For details, refer to the iPod manuals.

iPod and iPhone

“Made for iPod” and “Made for iPhone” mean that an electronic

accessory has been designed to connect specifically to iPod or

iPhone, respectively, and has been certified by the developer to

meet Apple performance standards.

Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod or iPhone

may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trade-

marks of Apple Inc., registered in the U.S. and other countries.

Maximum image size: 720 pixels × 576 pixels

Maximum file size: 4 GB

Video les compatibility (USB)

Files may not be played back properly depending on the

environment in which the file was created or on the contents

of the file.

This product may not operate correctly, depending on the

application used to encode WMA files.

Depending on the version of Windows Media™ Player used

to encode WMA files, album names and other text informa-

tion may not be correctly displayed.

There may be a slight delay when starting playback of audio

files encoded with image data.

This product is not compatible with packet write data

transfer.

This product can recognize up to 32 characters, beginning

with the first character, including extension for the file and

folder name. Depending on the display area, this product

may try to display them with a reduced font size. However,

the maximum number of the characters that you can display

varies according to the width of each character, and of the

display area.

Folder selection sequence or other operations may be

altered, depending on the encoding or writing software.

Regardless of the length of blank section between the songs

of original recording, compressed audio discs play with a

short pause between songs.

.avi

Format: MPEG-4

Compatible video codec: MPEG-4

Compatible audio codec: Linear PCM(LPCM) MP3

Maximum resolution: 720 pixels x 480 pixels

Maximum Frame rate: 30 fps

Files may not be able to be played back depending on the bit

rate.

.mp4

Format: MPEG-4

Compatible video codec: MPEG-4

Compatible audio codec: AAC

Maximum resolution: 720 pixels x 480 pixels

Maximum Frame rate: 30 fps

Files may not be able to be played back depending on the bit

rate.

.mov

Format: MPEG-4

Compatible video codec: MPEG-4

Compatible audio codec: AAC/Linear PCM(LPCM) MP3

Maximum resolution: 720 pixels x 480 pixels

43< QRD3356-A >

Appendix Appendix

 The product lifetime of the LED backlight is more than

10 000 hours. However, it may decrease if used in high

temperatures.



If the LED backlight reaches the end of its product lifetime,

the screen will become dimmer and the image will no longer

be visible. In that case, please consult your dealer or the

nearest authorized Pioneer Service Station.

Specications

General

Rated power source.......................................................... 14.4 V DC

( 10.8 V to 15.1 V allowable)

Grounding system.......................................................Negative type

Maximum current consumption ...................................... .... 10.0 A

Dimensions (W × H × D):

DIN

Chassis ............................................ 180 mm × 50 mm × 160 mm

(7-1/8 in. ×2 in. ×6-1/4 in.)

Nose ............................................... .... 188 mm × 58 mm × 32 mm

(7-3/8 in. ×2-1/4 in. ×1-1/4 in.)

Chassis .......................................... 178 mm × 100 mm × 165 mm

(7 in. × 3-7/8 in. × 6-1/2 in.)

Nose ................................................. .... 171 mm × 97 mm × 9 mm

(6-3/4 in. × 3-7/8 in. × 3/8 in.)

Weight ....................................................................... 1.7 kg (3.7 lbs)

Display

Screen size/aspect ratio ................................ .... 6.2inch wide/16:9

(effective display area: 137.52mm × 77.232mm) ( 5-3/8in.

× 3in.)

Pixels .................................................... .... 1 152 000 ( 2 400 × 480 )

Display method ........................................ TFT Active matrix driving

Color system........... PAL/NTSC/PAL-M/PAL-N/SECAM compatible

Durable temperature range:

Power off

................................................................. .... –4°F to 176°F

Audio

Maximum power output .....................................•50 W × 4 ch/4 Ω

•50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for subwoofer)

Continuous power output ..... 22 W × 4 (50 Hz to 15 kHz, 5 %THD,

4Ω LOAD, Both Channels Driven)

Load impedance .............. 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable)

Preout output level (max) ......................................................... 2.0 V

Equalizer (5-Band Graphic Equalizer):

Frequency .........................100 Hz/315 Hz/1.25 kHz/3.15 kHz/8 kHz

Gain........................................................................................±12 dB

HPF:

Lightning

Lightning is a trademark of Apple Inc.

App Store

App Store is a service mark of Apple Inc.

iOS

iOS is a trademark on which Cisco holds the trademark right in

the US and certain other countries.

iTunes

iTunes is a trademark of Apple Inc., registered in the U.S. and

other countries.

Using app-based connected

content

IMPORTANT

Requirements to access app-based connected content

services using this product:



Latest version of the Pioneer compatible connected

content application(s) for the smartphone, available from

the service provider, downloaded to your smartphone.



A current account with the content service provider.

 Smartphone Data Plan.

Note: if the Data Plan for your smartphone does not pro-

vide for unlimited data usage, additional charges from

your carrier may apply for accessing app-based connected

content via 3G, EDGE and/or LTE (4G) networks.



Connection to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi

network.

 Optional Pioneer adapter cable connecting your iPhone to

this product.

Limitations:

 Access to app-based connected content will depend on the

availability of cellular and/or Wi-Fi network coverage for

the purpose of allowing your smartphone to connect to the

Internet.



Service availability may be geographically limited to the

region. Consult the connected content service provider for

additional information.



Ability of this product to access connected content is

subject to change without notice and could be affected

by any of the following: compatibility issues with future

firmware versions of smartphone; compatibility issues with

future versions of the connected content application(s)

for the smartphone; changes to or discontinuation of the

connected Content application(s) or service by its provider.

Notice regarding video viewing

Remember that use of this system for commercial or public view-

ing purposes may constitute an infringement on the author’s

rights as protected by the Copyright Law.

Notice regarding DVD-Video

viewing

This item incorporates copy protection technology that is pro-

tected by U.S. patents and other intellectual property rights of

Rovi Corporation. Reverse engineering and disassembly are

prohibited.

Notice regarding MP3 le

usage

Supply of this product only conveys a license for private, non-

commercial use and does not convey a license nor imply any

right to use this product in any commercial (i.e. revenue-gener-

ating) real time broadcasting (terrestrial, satellite, cable and/or

any other media), broadcasting/streaming via internet, intranets

and/or other networks or in other electronic content distribution

systems, such as pay-audio or audio-on-demand applications.

An independent license for such use is required. For details,

please visit

http://www.mp3licensing.com.

Using the LCD screen correctly

Handling the LCD screen

 When the LCD screen is subjected to direct sunlight for a

long period of time, it will become very hot, resulting in pos-

sible damage to the LCD screen. When not using this prod-

uct, avoid exposing it to direct sunlight as much as possible.



The LCD screen should be used within the temperature

ranges shown in Specifications on page 45.

 Do not use the LCD screen at temperatures higher or lower

than the operating temperature range, because the LCD

screen may not operate normally and could be damaged.



The LCD screen is exposed in order to increase its visibility

within the vehicle. Please do not press strongly on it as this

may damage it.



Do not push the LCD screen with excessive force as this may

scratch it.

 Never touch the LCD screen with anything besides your

finger when operating the touch panel functions. The LCD

screen can scratch easily.

Liquid crystal display (LCD) screen

 If the LCD screen is near the vent of an air conditioner, make

sure that air from the air conditioner is not blowing on it.

Heat from the heater may break the LCD screen, and cool

air from the cooler may cause moisture to form inside this

product, resulting in possible damage.



Small black dots or white dots (bright dots) may appear on

the LCD screen. These are due to the characteristics of the

LCD screen and do not indicate a malfunction.



The LCD screen will be difficult to see if it is exposed to direct

sunlight.

 When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption

of the video in the form of disturbances such as spots or

colored stripes.

Maintaining the LCD screen

 When removing dust from or cleaning the LCD screen, first

turn this product off and then wipe the screen with a soft dry

cloth.



When wiping the LCD screen, take care not to scratch the

surface. Do not use harsh or abrasive chemical cleaners.

LED (light-emitting diode) backlight

A light emitting diode is used inside the display to illuminate the

LCD screen.



At low temperatures, using the LED backlight may increase

image lag and degrade the image quality because of the

characteristics of the LCD screen. Image quality will improve

with an increase in temperature.

44 < QRD3356-A >< QRD3356-A >

Appendix Appendix

 The product lifetime of the LED backlight is more than

10 000 hours. However, it may decrease if used in high

temperatures.



If the LED backlight reaches the end of its product lifetime,

the screen will become dimmer and the image will no longer

be visible. In that case, please consult your dealer or the

nearest authorized Pioneer Service Station.

Specications

General

Rated power source .......................................................... 14.4 V DC

( 10.8 V to 15.1 V allowable)

Grounding system .......................................................Negative type

Maximum current consumption ...................................... .... 10.0 A

Dimensions(W×H×D):

DIN

Chassis ............................................180mm×50mm×160mm

(7-1/8in.×2in.×6-1/4in.)

Nose ............................................... ....188mm×58mm×32mm

(7-3/8in.×2-1/4in.×1-1/4in.)

Chassis ..........................................178mm×100mm×165mm

(7in.×3-7/8in.×6-1/2in.)

Nose .....................................................171mm×97mm×9mm

(6-3/4in.×3-7/8in.×3/8in.)

Weight ....................................................................... 1.7 kg (3.7 lbs)

Display

Screen size/aspect ratio ................................ .... 6.2inch wide/16:9

(effectivedisplayarea:137.52mm×77.232mm)(5-3/8in.

×3in.)

Pixels .................................................... ....1152000(2400×480)

Display method ........................................ TFT Active matrix driving

Color system ........... PAL/NTSC/PAL-M/PAL-N/SECAM compatible

Durable temperature range:

Power off

................................................................. .... –4°F to 176°F

Audio

Maximum power output .....................................•50 W ×4ch /4Ω

•50 W

×2ch /4Ω+70W ×1ch /2Ω(forsubwoofer)

Continuous power output ..... 22 W

×4(50Hz to 15 kHz , 5 %THD,

4ΩLOAD,BothChannelsDriven)

Load impedance .............. 4Ω(4Ωto8Ω[2Ωfor1ch

] allowable)

Preout output level (max) ......................................................... 2.0 V

Equalizer (5-Band Graphic Equalizer):

Frequency .........................100 Hz

/315 Hz /1.25 kHz /3.15 kHz /8 kHz

Gain ........................................................................................±12 dB

HPF:

Frequency .................................. 50 Hz /63 Hz /80 Hz /100 Hz /125 Hz

Slope ................................................................................–12 dB

/oct

Subwoofer/LPF:

Frequency

.................................. 50 Hz

/63 Hz /80 Hz /100 Hz /125 Hz

Slope ................................................................................–18 dB

/oct

Gain ........................................................................ +6 dB

to –24 dB

Phase ...................................................................... Normal/Reverse

Bass boost:

Gain

.......................................................................... +12 dB to 0 dB

DVD drive

System .........DVD-Video, VCD, CD, MP3, WMA, AAC, DivX, MPEG

player

Usable discs

..DVD-VIDEO, VIDEO-CD, CD, CD-R, CD-RW, DVD-R,

DVD-RW, DVD-RDL

Region number ................................................................................1

Signal Format:

Sampling frequency

....................... 32 kHz /44.1 kHz /48 kHz /96 kHz

Number of quantization bits.................... 16 bit/20 bit/24 bit; linear

Frequency response ...... 5 Hz

to 44 000 Hz (with DVD, at sampling

frequency 96 kHz

)

Signal-to-noise ratio .....91 dB

(1 kHz ) (IHF-A network) (RCA level)

Output level:

Video

............................................................. 1.0 V

p-p/75Ω(±0.2V )

Number of channels ..........................................................2 (stereo)

MP3 decoding format ............................ MPEG-1 & 2 A

udio Layer 3

WMA decoding format ........Ver.7, 7.1, 8, 9 (2 ch

audio) (Windows

Media Player)

AAC decoding format

..........MPEG-4 A

AC (iTunes encoded only):

.m4a (Ver. 10.6 and earlier)

DivX decoding format

Home Theater Ver. 3, 4, 5.2, 6 (Except ultra

and HD) : .avi, .divx

MPEG video decoding format ..MPEG-1, MPEG-2, MPEG-4 (part2)

USB

USB standard spec ..... USB1.1, USB2.0 Full Speed, USB2.0 High

Speed

USB standard spec

...............USB 2.0 high speed (For audio files)

Max current supply .................................................................. 1.0 A

USB Class .............................................MSC (Mass Storage Class)

File system ...................................................................FAT16, FAT32

MP3 decoding format ............................ MPEG-1 & 2 A

udio Layer 3

WMA decoding format ........Ver.7, 7.1, 8, 9 (2 ch

audio) (Windows

Media Player)

AAC decoding format

....MPEG-4 A

AC (iTunes encoded only) (Ver.

10.6 and earlier)

WAVE signal format ........... Linear PCM: wav

Sampling Frequency

.........Linear PCM: 16 kHz , 22.05 kHz , 24 kHz ,

32 kHz

, 44.1 kHz , 48 kHz

Sampling Frequency .................... MS ADPCM: 22.05 kHz /44.1 kHz

JPEG decoding format ............................................. .jpeg, .jpg, .jpe

Pixel Sampling .................................................................4:2:2, 4:2:0

Decode Size ........MAX: 8 192 (H) x 7 680 (W), MIN: 32 (H) x 32 (W)

MPEG4 video decoding format ................................. Simple Profile

Bluetooth

(AVH-280BT)

Version ......................................................... Bluetooth 3.0 certified

Output power.............................................................. +4 dB

m Max.

(Power class 2)

FM tuner

Frequency range ......................................... 87.9 MHz to 107.9 MHz

Usable sensitivity .............12 dBf (0.8µV/75Ω,mono,S/N:30dB )

Signal-to-noise ratio .....................................72 dB

(IEC-A network)

AM tuner

Frequency range ...............................530 kHz to 1 710 kHz (10 kHz )

Usable sensitivity ............................................... 28 µV (S/N: 20 dB

)

Signal-to-noise ratio .................................... 62 dB

(IEC-A network)

CEA2006 Specications

Power output ............... ....14WRMS×4Channels(4Ωand≦1 %

THD+N)

S/N ratio

................................ 91dBA (reference: 1 W

into4Ω)

Specifications and design are subject to possible modifica-

tions without notice due to improvements.

 The LCD screen should be used within the temperature

ranges shown in Specifications on page 45.

 Do not use the LCD screen at temperatures higher or lower

than the operating temperature range, because the LCD

screen may not operate normally and could be damaged.



The LCD screen is exposed in order to increase its visibility

within the vehicle. Please do not press strongly on it as this

may damage it.



Do not push the LCD screen with excessive force as this may

scratch it.

 Never touch the LCD screen with anything besides your

finger when operating the touch panel functions. The LCD

screen can scratch easily.

Liquid crystal display (LCD) screen

 If the LCD screen is near the vent of an air conditioner, make

sure that air from the air conditioner is not blowing on it.

Heat from the heater may break the LCD screen, and cool

air from the cooler may cause moisture to form inside this

product, resulting in possible damage.



Small black dots or white dots (bright dots) may appear on

the LCD screen. These are due to the characteristics of the

LCD screen and do not indicate a malfunction.



The LCD screen will be difficult to see if it is exposed to direct

sunlight.

 When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption

of the video in the form of disturbances such as spots or

colored stripes.

Maintaining the LCD screen

 When removing dust from or cleaning the LCD screen, first

turn this product off and then wipe the screen with a soft dry

cloth.



When wiping the LCD screen, take care not to scratch the

surface. Do not use harsh or abrasive chemical cleaners.

LED (light-emitting diode) backlight

A light emitting diode is used inside the display to illuminate the

LCD screen.



At low temperatures, using the LED backlight may increase

image lag and degrade the image quality because of the

characteristics of the LCD screen. Image quality will improve

with an increase in temperature.

45< QRD3356-A >

Appendix Appendix

Pioneer AVH-280BT Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer AVH-280BT

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info