39
38
Switch settings on MicroMLxS
For correct MicroMLxS switch settings for use
with Phonak hearing instruments, please refer to the
respective hearing instrument user guide.
For all other hearing instrument brands, the MicroMLxS
switch setting depends on the type of the hearing
instrument.
Ask your hearing care professionals about the right
switch settings for your hearing instruments.
Setup of FM receivers
Users of Phonak hearing instruments should check
recommended settings of the FM receivers in the
respective hearing instrument user guide.
Default channel
MyLink and MicroLink receivers are programmed with
a default channel which activates at startup. It can be
modified at Phonak service centers.
Channel synchronization
ZoomLink can change your MyLink or MicroLink receiver
channel directly “over the air” within a distance of 20 cm
(8 inches). This feature ensures ZoomLink and the
MyLink or MicroLink receivers use the same radio channel.
Standby mode
This function helps economize on power. Whenever you
switch off the transmitter, about 40 seconds later, your
MyLink or MicroLink receivers automatically enter the
standby mode. They switch to normal FM operation
automatically, when ZoomLink is switched on again.
