631866
47
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
M H2O hearing aid
User Guide
2
1. Welcome 5
2. Important safety information:
Please read before operating your hearing
aid for the first time 6
Hazard warnings 6
Information on product safety 8
3. Hearing aid description 10
4. Step-by-step instructions for using
the hearing aid 13
Step 1. Getting to know your hearing aid 13
Step 2. Battery preparation 15
Step 3. Inserting the battery 15
Step 4. Turning on the hearing aid 16
Step 5. Inserting the hearing aid 17
Step 6. Adjusting the volume control
behind the ear 23
Step 7. Selecting the hearing program
behind the ear 24
Contents
3
Step 8. Removing the hearing aid 25
Step 9. Turning off the hearing aid 27
Step 10. Changing the battery 28
Step 11. Changing the battery in hearing
aids with a secured battery compartment 28
5. Care and maintenance 30
6. Troubleshooting 33
7. Wireless accessories and FM systems 35
8. Service and warranty 37
Local warranty 37
International warranty 37
Warranty limitations 37
9. Compliance information 38
10. Information and explanation of symbols 41
11. Important information: Cell phones 44
12. For the US market only, complies with the
FDA regulations 46
Contents
5
1. Welcome
Your new hearing aid is a premium Swiss quality product.
It was developed by Phonak, one of the world‘s leading
companies in hearing technology. Your hearing aid
offers the most modern digital hearing technology
currently available on the market.
Please read these user instructions thoroughly in order
to benefit from all the possibilities your new hearing
aid has to offer. With proper use and care, you will be
able to enjoy your hearing aid for many years to come.
If you have any questions, please consult your hearing
care professional.
Phonak - life is on www.phonak-us.com
0459
6
Please read the information on the following pages
before using your hearing aid.
A hearing aid will not restore normal hearing and
will not prevent or improve a hearing impairment
resulting from organic conditions. Infrequent use
of a hearing aid does not permit a user to attain full
benefit from it. The use of a hearing aid is only
part of hearing habilitation and may need to be
supplemented by auditory training and instruction
in lipreading.
2.1 Hazard warnings
Use only hearing aids that have been specially pro-
grammed for you by your hearing care professional.
Other hearing aids may be ineffective and may, in
certain cases, damage your hearing.
Changes or modifications to the hearing aid that
were not explicitly approved by Phonak are not
permitted. Such changes may damage your ear or
the hearing aid.
2. Important safety information
7
Hearing aid batteries are toxic if they are swallowed!
Keep out of reach of children and pets. If batteries
are swallowed, consult your physician immediately!
If you feel pain in or behind your ear, if it is inflamed,
if skin irritation or accelerated accumulations of
ear wax occur, please check with your hearing care
professional or physician.
In very rare cases, the dome can remain in your ear
canal when removing the hearing tube from the
ear. In the unlikely case that the dome does get stuck
in your ear canal, it is strongly recommended to
see a physician for safe removal.
Hearing programs in the directional microphone
mode reduce background noises. Please be aware
that warning signals or noises coming from behind,
e. g. cars, are partially or entirely suppressed.
The hearing aid contains small parts which can be
swallowed by children.
8
External devices may only be connected if they
have been tested in accordance with corresponding
IECXXXXX standards. Only use accessories approved
by Phonak AG.
2.2 Information on product safety
Your hearing aid is resistant to water, sweat and
dust under the conditions listed in chapter 5. After
exposure to any of these elements the hearing aid
must be rinsed in fresh water and dried.
Protect your hearing aid from heat (never leave it
near a window or in the car.) Never use a microwave
or other heating devices to dry your hearing aid.
Ask your hearing care professional about suitable
drying methods.
When you are not using your hearing aid, leave the
battery compartment open so that any moisture
can evaporate. Make sure that you always completely
dry your hearing aid after use. Store the hearing
aid in a safe, dry and clean place.
2. Important safety information
9
Do not drop your hearing aid! Dropping onto a hard
surface can damage your hearing aid.
Always use new batteries for your hearing aid.
You can return used batteries to your hearing care
professional.
Remove the battery if you are not using your hearing
aid for a long period of time.
X-ray radiation (e. g. CT scans, MRI scans) may
adversely affect the correct functioning of your
hearing aids. We recommend that you remove
them before undergoing X-ray procedures and
keep them outside the room.
Do not use your hearing aid in areas where electronic
equipment is prohibited.
10
The M H2O can be adapted with a variety of
earmolds. On the following pages use the labeled
drawings to identify the earmold that you use.
Your hearing aid uses a size 13 battery.
3. Hearing aid description
11
Option A: with classic earmold
a Right or left indicator (right=red, left=blue)
b Battery compartment with ON/OFF switch
c Push button
d Microphone input
e Hook/sound output
f Hearing tube
g Classic earmold
c
d
e
f
g
b
a
12
3. Hearing aid description
Option B: with dome Option C: with SlimTip
f Hearing tube
h Earmold: Dome
i Retention
j Earmold: SlimTip
k Removal handle
f
h
i
f
j
k
13
f
j
k
The following chapter provides step-by-step instructions
on how to use your hearing aid. Please follow
these steps carefully. In the drawings, the parts that
are particularly important for each step are shown
in green.
Step 1. Getting to know your hearing aid
Take the hearing aid in your hand and try out the
hearing aid controls. This will make it easier for you to
feel and operate the controls later on when wearing
the hearing aid.
4. Step-by-step instructions for using
the hearing aid
14
Your hearing care professional can configure your
hearing aid (push) button as either a volume control
or a program selector.
To increase the volume, press the button on your
right hearing aid. To decrease the volume, press the
button on your left hearing aid (Fig. 1a).
In order to change a
hearing program, press
the button displayed
(Fig. 1b).
Fig. 1b
Fig. 1a
4. Using the hearing aid
Increase
volume
Decrease
volume
Left hearing aid Right hearing aid
15
Increase
volume
Fig. 2
Step 2. Battery preparation
Remove the protective foil from the new battery (Fig. 2).
Wait for two minutes before inserting to activate the
battery.
Step 3. Inserting the battery
Take the hearing aid in your hand (Fig. 3a) and open
the battery door. Insert the battery so that you see the
+ symbol on the battery (Fig. 3b).
Fig. 3bFig. 3a
16
Step 4. Turning on the hearing aid
Switch on the hearing aid by closing the battery
compartment (Fig. 4).
Open and close the battery compartment gently
and carefully.
Check if you feel resistance when closing the
battery compartment. Check to make sure the
battery is correctly inserted and in the correct
direction. If the battery is inserted the wrong
way, the hearing aid will not work and the
battery compartment can be damaged.
Fig. 4
4. Using the hearing aid
17
The hearing aid is now switched on. It can take up
to 15 seconds before it starts. (When you wear the
hearing aid, you will hear an acoustic signal).
Step 5. Inserting the hearing aid
This step shows you how to correctly insert the hearing
aid. The instructions apply for all hearing aid models.
The type of earmold determines how the hearing aid is
inserted.
Each hearing aid is individually programmed for
your right or left ear. For the first step identify
right and left so you will be able to insert your
hearing aid in the correct ear.
18
Step 5.1 Identifying the hearing aid for the
right and left ear
Color indicator:
right = red
left = blue
Fig. 5a
4. Using the hearing aid
19
Step 5.2 Inserting the hearing aid with classic earmold
With your right hand, take your earmold for the right
ear (red mark on the hearing aid, see step 5.1) between
your thumb and forefinger (Fig. 5b).
Take the earmold up to your ear (Fig. 5b). Place the ear
canal part of the earmold into your ear canal (see the
part circled in green (Fig. 5b)). Next place the hearing
aid behind your ear (Fig. 5c). Then insert the upper part
of the earmold into the upper part of the bowl of your
ear (Fig. 5d).
Fig. 5b Fig. 5dFig. 5c
20
If you have problems inserting the hearing aid, use
your other hand to gently pull your earlobe downwards.
This opens the ear canal a little more and you can
rotate the earmold until it fits correctly.
Check the fit by running your finger over the bowl of
the ear. You know it fits correctly if, when doing so, you
feel the contour of the bowl of the ear and not the
hearing aid (Fig. 5e). In the beginning, please use a mirror
to check.
You have now successfully inserted the right hearing
aid. Now insert your left hearing aid in the same way
(marked in blue, see step 5.1).
Fig. 5e
4. Using the hearing aid
21
Step 5.3 Inserting the hearing aid with a dome
With your right hand, place the right hearing aid (red
mark on the hearing aid, see step 5.1) behind your
right ear (Fig. 5f). Place the hearing tube between your
thumb and forefinger. Insert the dome deep enough
into the ear canal so that the hearing tube lies flat on
your ear (Fig. 5g). If your hearing aid has a retention
cord, then press it into the bowl of the ear in order to
retain the dome in the ear canal (Fig. 5h).
Fig. 5f Fig. 5g Fig. 5h
22
If you have problems inserting the hearing aid, use
your other hand to gently pull your earlobe downwards.
This opens the ear canal a little more and you can
rotate the dome until it fits correctly.
You have now successfully inserted the right hearing
aid. Now insert your left hearing aid in the same way
(marked in blue, see step 5.1).
Step 5.4 Inserting the hearing aid with a SlimTip
Follow the instructions in Step 5.3, as this procedure
is identical.
4. Using the hearing aid
23
Fig. 6
Step 6. Adjusting the volume control behind the ear
Your hearing care professional can configure your
hearing aid (push) button as either a volume control or
a program selector.
To increase the volume, press the button on your right
hearing aid. To decrease the volume, press the button
on your left hearing aid. Use your thumb to lightly
support the hearing aid (Fig. 6).
Decrease volume Increase volume
Left hearing aid Right hearing aid
24
Step 7. Selecting the hearing program behind the ear
In order to select or change a hearing program, press
the program button displayed (Fig. 7).
If you press it again, you change to the next program.
A signal indicates the change.
A signal tone can only be easily heard if you have turned
on the hearing aids and you are wearing it correctly
behind the ear.
Fig. 7
4. Using the hearing aid
25
Step 8. Removing the hearing aid
Step 8.1 Removing the hearing aid with classic
earmold
Take the hearing aid behind your ear (do not touch
the tube!) and lift it above the upper part of your ear
and then gently let go (Fig. 8a).
Use your thumb and forefinger to grasp the earmold
in your ear (not the tube!) and gently remove it from
your ear (Fig. 8b).
Fig. 8a
Fig. 8b
26
Step 8.2 Removing the hearing aid with a dome
Grasp the hearing aid by the hearing tube and
carefully remove it from your ear (Fig. 8c).
In very rare cases, the dome can remain in your
ear canal when removing the hearing tube from the
ear. In the unlikely case that the dome does get
stuck in your ear canal, it is strongly recommended
to see a physician for safe removal.
Step 8.3 Removing the hearing aid with SlimTip
Follow the instructions in Step 8.2, as this procedure
is identical.
Fig. 8c
4. Using the hearing aid
27
Step 9. Turning off the hearing aid
You can turn off your hearing aid by opening the battery
compartment (Fig. 9).
Fig. 9
28
Step 10. Changing the battery
Before the battery is completely empty, your hearing
aid will indicate to you that the battery soon needs to
be changed with an acoustic signal. Once this
happens, you have about 30 minutes (in some cases
longer) to change the battery. The battery warning
signal is repeated every half hour. We recommend that
you always keep a spare battery on hand.
Step 11. Changing the battery in hearing aids with a
secured battery compartment
Your hearing aid has the option to be fitted with a
tamper proof battery compartment if needed for safety
reasons.
4. Using the hearing aid
29
After you have opened the battery compartment, push
the battery out of the battery compartment with the
support of a pen back (Fig. 11a). Insert the new battery
so that you see the + symbol on the battery (Fig. 11b).
Push the plastic tab towards the battery (Fig. 11c).
Fig. 11a Fig. 11b
Fig. 11c Fig. 11d
Close the battery compartment. The battery is now
locked in position and cannot be removed (Fig. 11d).
30
5. Care and maintenance
Diligent and routine care of your hearing aid
contributes to outstanding performance and a long
service life.
Please use the following specifications as a guideline:
General information
Before using hair spray or applying cosmetics, you
should remove your hearing aid from your ear, because
these products may damage it.
M H2O is WaterResistant!
M H2O hearing aids are resistant to water (including
temporary immersion), sweat and dust under the
following conditions:
J The battery door is fully closed. Ensure that no
foreign object such as hair is caught in the battery
door when it is closed.
J After exposure to water, sweat or dust, the hearing
aid is rinsed in fresh water and dried.
J The hearing aid is used and maintained as described
in this user guide.
31
M H2O hearing aids modified with either the design-
integrated FM receiver or tamperproof battery door
are also WaterResistant.
M H2O hearing aids modified with a battery
compartment allowing use of an audio shoe and
universal FM receiver, are no longer WaterResistant.
Always remove your hearing aid before diving,
snorkeling, waterskiing or other activities where it
could be immersed for an extended period of time
or subject to excessive force.
Use of your hearing aid in and around water can
restrict air flow to the batteries causing it to stop
working. Should your hearing aid stop working
after coming into contact with water, refer to the
troubleshooting steps in chapter 6.
32
Daily
Inspect the earmold and tube for earwax and moisture
deposits. Clean the surfaces with a lint-free cloth.
Never use cleaning agents such as household detergents,
soap, etc. for cleaning your hearing aid. If you need
to clean your hearing aid intensively, ask your hearing
care professional for advice and information on filters
or drying capsules.
Weekly
Clean the earmold with a soft, damp cloth or with
a special cleaning cloth for hearing aids. For more in
depth maintenance instructions or for more than
basic cleaning, please see your hearing care professional.
Monthly
Inspect your hearing tube for color changes, hardening,
or cracks. In the case of such changes, the hearing
tube has to be replaced. Please see your hearing care
professional.
5. Care and maintenance
33
Hearing aids sound softer than usual / no sound
First check whether you can adjust and make the
sound louder with the volume control. Then check the
hearing tube and earmold for earwax residue and
clean if necessary. Check whether the battery is correctly
inserted and properly fitted, adjust the fit if necessary.
If there is no improvement, change the battery. If the
problem persists, contact your hearing care professional.
Hearing aid stops working after contact with water
Rinse the hearing aid in fresh water and dry it with a
soft cloth or tissue. Open the battery compartment,
allow the hearing aid to dry and replace the battery.
Should any water be present in the hearing tube, remove
it from the hearing aid, tap it gently to disperse the
water and re-attach it to the hearing aid. If the problem
persists, contact your hearing care professional.
Battery discharges too quickly
Insert a new battery and make note of exactly how
long it lasts. Contact your hearing care professional
with this information, they will be able to help and
advise you.
6. Troubleshooting
34
Crackling or buzzing noises
Check the hearing tube and earmold for earwax residue.
Check the hearing tube for damage (color changes,
hardening, or cracks) and contact your hearing care
professional if necessary for replacement.
Whistling
Check whether the earmold is correctly and firmly
fitted. If this is the case, but the problem persists,
please consult with your hearing care professional.
Pain or inflammation in your ear
Remove the hearing aid and consult with your hearing
care professional. If the problem is serious, please
contact your physician.
6. Troubleshooting
35
7.1 Wireless accessories
Phonak has developed a broad range of wireless
accessories that allow you to best use and discreetly
control your hearing aid. These include, for example,
remote controls, wireless connection modules to the
TV and computer, and much more. Programs and
accessories that can help you make phone calls simply
and more comfortably are also included in this product
range.
7.2 FM systems
FM Systems are wireless communication systems
consisting of a radio transmitter and a radio receiver.
The transmitter is placed close to the sound source
(e. g. TV/Radio/lectern). The sound is transmitted clearly
and directly to the hearing aid in the form of radio
signals – without disruptive background noises or
echoes.
Phonak is a leader in FM communication. In order to
take advantage of the benefits of these high-tech radio
systems, consult with your hearing care professional.
7. Wireless Accessories and FM systems
36
If you already have an FM system and need additional
information on using this system, please consult the
relevant user instructions on the FM transmitter or the
FM receiver.
For more information, please visit www.phonak.com,
or ask your hearing care professional.
7. Wireless Accessories and FM systems
37
8. Service and warranty
8.1 Local warranty
Please ask the hearing care professional, where you
purchased your hearing aid, about the terms of the local
warranty.
8.2 International warranty
Phonak offers a one year limited international warranty,
valid starting from the date of purchase. This limited
warranty covers manufacturing and material defects in
the hearing aid itself, but not accessories such as
batteries, tubes, earmolds, external receivers. The
warranty is valid only if proof of purchase is shown.
8.3 Warranty limitation
This warranty does not cover damage from improper
handling or care, exposure to chemicals or undue stress.
Damage caused by third parties or non-authorized service
centers renders the warranty null and void. This warranty
does not cover any services performed by a hearing care
professional in his/her office.
Serial number (left side):
Serial number (right side):
Date of purchase:
Authorized hearing care
professional
(stamp/signature):
38
Declaration of Conformity
Hereby Phonak AG declares that this Phonak product
meets the requirements of the Medical Devices Directive
93/42/EEC as well as the Radio and Telecommunications
Terminal Equipment Directive 1999/5/EC. The full text of
the Declaration of Conformity can be obtained from
the manufacturer.
Important information: Hearing aid usage with cell phones
Some hearing aid users have reported a buzzing sound
in their hearing aids when they are using cell phones.
Please note that the performance of individual hearing
aids may vary with individual cell phones. Therefore,
please try the hearing aid with your cell phone or, if you
are purchasing a new phone, be sure to try it with your
hearing aid prior to purchase. For additional guidance,
please ask your hearing healthcare professional for the
booklet entitled “Hearing Aid Compatibility with Digital
Wireless Cell Phones.”
9. Compliance information
According to the ANSI 63.19 (American National Standard Methods of Measurement
of Compatibility Between Wireless Communications Devices and Hearing instruments)
standard, the compatibility of a particular hearing aid and cell phone can be predicted by
adding the rating for the hearing aid immunity to the rating for the cell phone emissions.
The sum of the hearing aid rating (e.g. M2/T2=2) and the telephone rating (e.g. M3/T3=3)
is 5, and any combination that equals 5 will provide “normal use”; a sum of 6 or greater
would indicate “excellent performance.” the equipment performance measurements,
categories and system classifications are based upon the best information available but
cannot guarantee that all users will be satisfied. The immunity of this hearing aid is at
least M2/T2.
39
The hearing aids described in this user guide are
certified under:
USA FCC ID: KWC-WHSSAN1
Canada IC: 2262A-WHSSAN1
Notice 1:
This device complies with Part 15 of the FCC Rules and
with RSS-210 of Industry Canada. Operation is subject
to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.
Notice 2:
Changes or modifications made to this device not
expressly approved by Phonak may void the FCC
authorization to operate this device.
40
9. Compliance information
Notice 3:
This device has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules and ICES-003 of Industry
Canada. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This device generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this device
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
J Reorient or relocate the receiving antenna.
J Increase the separation between the device and
receiver.
J Connect the device into an outlet on a circuit
different from that to which the receiver is connected.
J Consult the dealer or an experienced radio/TV
technician for help.
41
10. Information and explanation
of symbols
With the CE symbol, Phonak AG
confirms that this Phonak product –
including accessories – meets the
requirements of the Medical Devices
Directive 93/42/EEC as well as the
R&TTE Directive 1999/5/EC on radio
and telecommunications equipment.
The numbers after the CE symbol
correspond to the code of certified
institutions that were consulted
under the above-mentioned directives.
This symbol indicates that the
products described in these user
instructions adhere to the
requirements for an application
part of Type B of EN 60601-1.
The surface of the hearing aid is
specified as an applied part of
Type B.
XXXX
42
EMC and Radio communications
compliance label Australia.
This symbol indicates that it is
important for the user to read and
take into account the relevant
information in these user guides.
This symbol indicates that it is
important for the user to pay
attention to the relevant warning
notices in these user guides.
Important information for handling
and product safety.
The product is designed such that
it functions without problems
or restrictions if used as intended,
unless otherwise noted in these
user guides.
Operating
conditions
10. Information and description of symbols
43
During transport or storage, the
temperature should not exceed the
limit values of –20°/60° Celsius
and relative humidity of 65% for a
long period of time. The air pressure
range between 500 and 1100 hPa
is appropriate.
The symbol with the crossed-out
garbage bin is to make you aware
that this hearing aid may not be
thrown away as normal household
waste. Please dispose of old or
unused hearing aids, at waste disposal
sites intended for electronic waste, or
give your hearing aid to your hearing
care professional for disposal. Proper
disposal protects the environment
and health.
Transport
and storage
conditions
44
Some hearing aid users have reported a buzzing sound
in their hearing aids when they are using cell phones.
According to the ANSI 63.19 (American National
Standard Methods of Measurement of Compatibility
Between Wireless Communications Devices and
Hearing Instruments) standard, the compatibility of a
particular hearing aid and cell phone can be predicted
by adding the rating for the hearing aid immunity to
the rating for the cell phone emissions. The sum of the
hearing aid rating (e.g. M2/T2=2) and the telephone
rating (e.g. M3/T3=3) is 5, and any combination that
equals 5 will provide “normal use”; a sum of 6 or
greater would indicate “excellent performance”. The
equipment performance measurements, categories and
system classifications are based upon the best
information available but cannot guarantee that all
users will be satisfied. The immunity of this hearing aid
is at least M2/T2.
Note: the performance of individual hearing aids may
vary with individual cell phones. Therefore, please
try the hearing aid with your cell phone or, if you are
purchasing a new phone, be sure to try it with your
11. Important information:
Cell phones
45
hearing aid prior to purchase. For additional guidance,
please ask your hearing care professional for the
booklet entitled “hearing aid compatibility with digital
wireless cell phones”.
46
Warning to Hearing Aid Dispensers
A hearing aid dispenser should advise a prospective
hearing aid user to consult promptly with a licensed
physician (preferably an ear specialist) before dispensing
a hearing aid if the hearing aid dispenser determines
through inquiry, actual observation, or review of any
other available information concerning the prospective
user, that the prospective user has any of the following
conditions:
(i) Visible congenital or traumatic deformity of
the ear.
(ii) History of active drainage from the ear within
the previous 90 days.
(iii) History of sudden or rapidly progressive hearing
loss within the previous 90 days.
(iv) Acute or chronic dizziness.
(v) Unilateral hearing loss of sudden or recent onset
within the previous 90 days.
(vi) Audiometric air-bone gap equal to or greater
than 15 decibels at 500 hertz (Hz), 1,000 Hz, and
2,000 Hz.
12. For the US market only, complies
with the FDA regulations
47
(vii) Visible evidence of significant cerumen
accumulation or a foreign body in the ear canal.
(viii) Pain or discomfort in the ear. Special care should
be exercised in selecting and fitting a hearing
aid whose maximum sound pressure level exceeds
132 decibels because there may be risk of
impairing the remaining hearing of the hearing
aid user. (This provision is required only for
those hearing aids with a maximum sound pressure
capability greater than 132 decibels (dB).)
Important Notice for Prospective
Hearing Aid Users
Good health practice requires that a person with a
hearing loss have a medical evaluation by a licensed
physician (preferably a physician who specializes
in diseases of the ear) before purchasing a hearing aid.
Licensed physicians who specialize in diseases of the
ear are often referred to as otolaryngologists, otologists
or otorhinolaryngologists. The purpose of medical
evaluation is to assure that all medically treatable
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Phonak Solana MH2O bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Phonak Solana MH2O in de taal/talen: Engels als bijlage per email.

De handleiding is 4,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info