ENGLISH 9
Directions for use
Mounting the appliance on the wall
C
1 Mount the charging unit to the wall.
◗ Do not allow the charging unit to come into
contact with water.The toothbrush, however, is
watertight and can therefore be used safely
anywhere.
◗ To mount the charger to the wall, you will need 2
wood screws (3,5 x 25 mm) and two wall plugs
(S5).They are available in any home centre.
Charging
1 The charging unit can be connected to mains voltages
between 100 and 240 Volts (alternating current) (only
type HX 2575).
C
1 Charge the appliance for 6 hours (NiMH
version) or 3 hours (NiCd version) before
you use it for the first time.
- ◗ The toothbrush can be put back in the charging
unit after use.
◗ If the battery in the toothbrush is being charged,
the pilot light is green and blinks. If the battery has
been fully charged, the pilot light is burns
continuously.
◗
If the battery is almost empty, the pilot light is red and
blinks for 10 seconds after the toothbrush has been
switched off.