400873
13
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
1 Unplug the appliance and remove the jar from the motor unit (Fig. 19).
2 Remove the lid from the jar and turn the lid upside down (Fig. 20).
3 remove the sieve and the valve from the lid. (Fig. 21)
4 Remove the blade unit from the jar (Fig. 22).
5 Clean the blade unit under the tap thoroughly, immediately after use. Make sure you also
rinse the inside of the tube of the blade unit (Fig. 23).
Handle the blade unit very carefully. The cutting edges are very sharp.
Note: If you want to clean the blade unit more thoroughly, you can also place it in the dishwasher after
you have rinsed it.
6 Clean the other parts that have come into contact with food in hot water with some
washing-up liquid immediately after use.
Note: All parts, except the motor unit, can also be cleaned in the dishwasher.
7 If necessary, clean the motor unit with a moist cloth.
8 Check if any food particles have entered the water tank. You can do this by looking into the
lling opening to see if there are any food particles in it or by checking if the water has an
unusual colour and by smelling if the water tank produces an unpleasant or a burnt smell. If
this is the case, clean the water tank (see section ‘Descaling the water tank’ in this chapter).
9 Leave the lid of the lling opening open to prevent bacterial growth.

If food particles enter the water tank, they may get stuck to the heating element in the water tank
during the next steaming processes. These particles cannot be removed by just rinsing the water
tank.
In addition, you have to descale the appliance every four weeks to ensure it continues to work
100% effectively. To reduce scale build-up, it is helpful to use pre-boiled or ltered water in the
appliance.
To remove food particles inside the water tank and to descale the appliance, follow the descaling
instructions below.
1 Make sure the appliance is switched off.
2 Add one sachet of citric acid (10g) to 200ml of warm water.
Note: You can also use a solution of 150ml water and 50ml white vinegar (8% acetic acid).
3 Fill the water tank with the solution of citric acid (or vinegar) and water.
4 Close the lid of the lling opening.
5 Place the empty jar (without any food inside) fully assembled with blade unit and lid on the
motor unit in steaming position (i.e. with the lid pointing downwards).
6 Turn the control knob to steaming position.
, The steaming light lights up orange to indicate that the appliance is steaming.
7 Switch off the appliance after 5-6 min of steaming and unplug it.
8 Pour the used solution of citric acid (or vinegar) and water out of the water tank. (Fig. 24)
9 Rinse the water tank and the jar thoroughly with fresh water several times.
10 Fill the tank with 200ml water and let the appliance complete a steaming process of 20
minutes with the empty jar before you use the appliance with food again.
 13
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips scf 870 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips scf 870 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info