2
Instructions For Use English
You just made a great choice by buying this Philips universal remote
control! It takes the place of as many as four separate remote controls
and can operate the most-used functions of almost any brand of TV, VCR,
satellite tuner, cable decoder and CD-player.
Best of all, it's quick to setup and easy to use! Here's how...
AT A GLANCE
Once you've installed the batteries, this remote is ready to work with any
Philips TV, VCR, satellite tuner or CD-player. Simply press the mode
selector as indicated below - for the Philips device you wish to operate,
and press to test. For other brands of equipment, it needs to be set
up first- see Getting Started.
Choose TV, VCR, SAT or AUDIO. The remote has 4 operating modes: TV,
VCR, satellite tuner (SAT) and CD-player (AUDIO). The green indicator
LEDs show which mode you're in. To switch between modes, press
once to activate, then press it again to advance to the next mode.
Power switches TV/VCR/SAT/CD on and off
Mode Selector selects whether you are operating the TV,
VCR, SAT or AUDIO
Mute switches TV sound on and off
Channel Up/Down changes to next/previous channel
Volume Up/Down controls TV volume
Keypad for direct channel selection and other functions
Shift: hold this key while pressing other keys to access
additional functions (if available on your equipment).
For instance: - Shift - P+: brightness+/menu up
- Shift - P- : brightness-/menu down
- Shift - vol+: colour+/menu right
- Shift - vol-: colour-/menu left
Try the other shift keys on your equipment to discover
which functions are available
1/2 Digits switches between one and two-digit channel
selection and display
for TV FastText for VCR
red Rewind
green Stop
yellow Play
blue Forward
Pause
Record
Teletext Off switches Teletext off
Teletext On switches Teletext on
Teletext Cancel toggles between normal and teletext
screen
Teletext Hold keeps the current Teletext page on screen
Teletext Time switches Clock on and off
Teletext Enlarge enlarges the Teletext display
