Programming track numbers
You may select up to 20 tracks and store them in the
memory in a desired sequence. You may store any track
more than once.
1 Press SELECT SOURCE repeatedly to display CD.
Or, if CD is already selected,
press 9 (STOP 9 on the remote control) to stop
CD playback.
2 Press PROGRAM to start programming.
➞PROGRAM flashes and the track number 1 is displayed.
3 Select a desired track with ∞ or § (PREV. ¡ or
NEXT ™ on the remote control).
4 Press PROGRAM to store this track.
➞The number of selected tracks and the playing time
of the program is displayed briefly.
5 Select and store all desired tracks in this way. If PROG
is displayed next to a tracknumber, this track is already
programmed.
Note: If you try to store more than 20 tracks,
FULL
is
displayed.
6 Press 2; (PLAY 2 on the remote control) to listen to
your selection of tracks.
Reviewing the program
• Keep PROGRAM pressed for more than 2 seconds to
review your program.
➞The display shows all stored tracks in sequence.
Note: Reviewing the program does not interrupt playback.
Erasing the program
1 Press 9 (STOP 9 on the remote control) to stop
playback.
2 Press 9 (STOP 9 on the remote control) to erase the
program.
➞PROGRAM goes off, CLEARED is displayed briefly
and the program is erased.
Note: The program will also be erased if you:
– interrupt the power supply,
– open the CD lid.
CD player and CD handling
The lens A of the CD player
should never be touched. If the CD
player cannot read CDs correctly
use a commonly available
cleaning CD to clean the lens. If
this does not help, take the unit to
an authorised repair workshop.
Other cleaning methods may destroy the lens. Always keep
the lid closed to avoid dust on the lens.
The lens may cloud over when the unit is suddenly moved
from cold to warm surroundings. This prevents the CD
player working properly. Leave the CD player in a warm
environment until the moisture evaporates.
Active mobile phones near the CD player may cause
malfunctions.
To take the CD out of its case
easily, press the centre spindle
while lifting the CD. Always pick
up the CD by the edge and put it
back in its box after use.
To clean the CD, wipe it in a
straight line from the centre
toward the edge using a soft, lint-
free cloth. A cleaning agent may
damage the disc! Never write on
a CD or attach a sticker to it.
