215271
29
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
multimedia projector
bSure 1 / bSure 2
Philips
User guide
English
>
4-5
Packaging contents 4
Optional accessories 5
Service accessories 5
6-9
Controls 6-7
Remote control 8
Connections 9
10-11
Positioning the projector and screen 10
Switching on the projector 10
Adjusting the focus and size of the image 11
Adjusting the vertical angle of the projector 11
Keystone correction 11
Moving/transporting the projector 11
Preparation 11
Moving/transporting the projector 11
Inserting the batteries in the remote control 11
12-17
General information 12
Computer input 12
Universal Serial Bus (USB) 12
External monitor connection 12
Video input 12
Connecting to a computer 13-14
PC/Macintosh 13
Connection to an external monitor 14
Connecting to video equipment 15-17
CVBS 15
S-VHS 15
Scart connection 15
Component/HDTV (Pr,Y, Pb/ Cr,Y, Cb) 16
Scart connection (RGBS) 17
1. Introduction
2. Functional overview
3. Set up
4. Installation
Philips Multimedia Projector 2 English User guide bSure1 / bSure 2
Index
<
18-27
Preparation 18
General 18
Messages 18
General explanation 18
Feedback messages 18
Some examples 18
On Screen Display Menu 19-27
Menu tree 19-20
General explanation 21
Computer adjustments 22-23
Display adjustments 22
Some examples 22
Digital Zoom/Magnification 22
Auto image 22
Horizontal size 22
Shift 23
Picture adjustments 23
Video/S-Video adjustments 24
Display adjustments 24
Picture adjustments 24
General adjustments 25
Audio adjustments 25
General settings 25-27
Loading your own personal start-up screen 26-27
Resetting the projector 27
28-30
Cleaning 28
Cleaning the cabinet 28
Cleaning the lens 28
Cleaning the dust filter 28
Lamp 29
Lamp replacement 29-30
Resetting the lamplife time 30
31-34
5. Operation
6. Maintenance
7.Troubleshooting
Philips Multimedia Projector 3 English User guide bSure1 / bSure 2
Index
>
Congratulations on your purchase of one of the most sophisticated and reliable products on the
market today.We are sure that, used properly, it will bring you years of enjoyment.You will want
to keep this manual handy, as it is a convenient source of information about your projector.
For your own protection and prolonged operation of your projector, please read the enclosed
Safety Sheet.
Please confirm that the following items are packed in the projector box.They are provided to
help you use or set up your projector.
Projector - Lens cap Compact remote control Laser pointer remote
+ batteries 2 x AAA Zinc control + batteries 2 x
Carbon, 1.5 V AAA Zinc, 1.5 V
(supplied with bSure2
Brilliance version only )
Integrated VGA/USB Cable Scart/RCA Audio Video Mains Lead
adapter (not for USA version)
Audio/Video RCA Cable Quick set up Card and Cd-rom (with Projection
Safety Sheet Assistant, Warranty card,
SecurityMax, User Guide,
Data sheet and more.)
Softbag (supplied with bSure2 Brilliance only)
Packaging contents
Philips Multimedia Projector 4 English User guide bSure1 / bSure 2
1. Introduction
Standby
On
Volume
OKMenu
AV MuteMute
D-ZoomD-FreezeSource
Mouse RIGHTLEFT
RightLeft
LASER
VOolume
OKMenu
Standby
On
AV Mute
D-ZoomD-FreezeSource
Mouse RIGHTLEFT
RIightLeft
6
The following accessories are available via he dealer from which you purchased your Philips projector:
LCA 3116/00 - 132 W replacement lamp - 8670 931 16009
LCA 3118/00 - 150 W replacement lamp - 8670 931 18009
LCA 3123/00 - 200 W replacement lamp - 8670 931 23009 (only for bSure2 Brilliance/LC3136 version)
LCA 3124/00 - 200 W replacement lamp - 8670 931 24009 (only for bSure2 Brilliance/LC3146 version)
LCA 2211/00 - Ceiling mount - 8670 922 11009
LCA 5310/00 - Monitor Y-cable - 8670 953 10009
LCA 5300/00 - VGA extension cable (15 m) - 8670 953 0009
LCA 5312/00 - Scart/RCA Component Video adapter - 8670 953 12009
The following accessories are available via our Service organisation only:
Compact remote Control - 3139 228 60500
Laser pointer remote Control - 3139 228 60550
Dust filter - 3122 434 01570
Mains lead USA - 4822 321 11294
Mains lead Euro - 4822 321 11399
Mains lead UK - 4822 321 11431
Integrated VGA/ USB cable - 3122 438 75120
MAC adapter (option) - 4822 263 21201
Audio/Video RCA cable (cinch) - 4822 320 12281
SCART/RCA Audio Video adapter - 2422 033 00345
User Guide (Cd- rom) - 3122 438 71130
Optional accessories
Service accessories
Philips Multimedia Projector 5 English User guide bSure1 / bSure 2
1. Introduction <
>
To mute the sound of the projector and to mute the picture.
To select the current projection source (Computer, Component, RGBS, S-Video,Video).
The button toggles between the five signals.
To adjust the volume.
To activate and deactivate the menu.
To confirm actions in the menu when the menu is on screen.
To switch the projector in or out of the Power/Standby mode.
The Standby indicator (text on button/ring around button):
lights up orange when the projector is warming up;
lights up red when the projector is in Power/Standby mode;
lights up green as when the projector is operating;
slowly blinks orange when the projector is cooling down.
Lights up red in case of temperature error.
Flashes in case of fan error.
Lights up green when the lamp is on.
Lights up orange when lamp life has almost expired.
Lights up red when lamp life has expired.
Fast blinks red when lamp start has failed.
To receive the signals from the remote control.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
To adjust the focus of the projected image.
To adjust the size of the projected image.
A(udio)/V(ideo) Mute 1
Source 2
– / + 3
Menu 4
OK 5
Standby/
Standby indicator 6
Temperature indicator 7
Lamp indicator 8
IR sensor 9
Cursor Control 0
Focus ring !
Zoomring @
Philips Multimedia Projector 6 English User guide bSure1 / bSure 2
2. Functional overview
!
@
Menu OK
AV
Mute
Source
Stand
by
Lamp
Tem p
Menu OK
AV
Mute
Source
Stand
by
Lamp
Tem p
7
8
90
1
2
3
4
5
6
Controls
<
To adjust the vertical angle of the projector.
To connect the projector to the mains.
To insert an optional locking device (Kensington lock).
Height/Level adjuster #
Dust filter $
Mains inlet socket %
Lock slit ^
Lamp compartment &
Philips Multimedia Projector 7 English User guide bSure1 / bSure 2
2. Functional overview
#
$
%
^
&
Controls
2. Functional overview
To switch the projector in or out of the Power/Standby mode.
Function as the Left and Right mouse keys of your pc when USB or PS/2 connection has been
made.
To adjust the volume.
To activate and de-activate the menu.
To select the current projection source (Computer, Component, RGBS, S-Video,Video).
The button toggles between the five signals.
To capture a (moving) picture.The button toggles between the Freeze mode and the display
situation.
To switch the Digital Zoom function On or Off (toggle button). In On condition, the zoom
centre can be selected using Cursor Control and the image is magnified with the zoom factor
chosen under Magnification.
To mute the sound of the projector and to mute the picture.
To manipulate the mouse cursor on the connected computer as long as the menu is not active.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
The Cursor Control can only function as a mouse cursor when projector and computer are connected
via the USB or PS/2 connectors.Windows 98, Windows ME, Windows 2000 or Windows XP should be
installed on the computer when you make the USB connection.
To confirm actions in the menu when the menu is on screen.
Only on compact remote control
To mute the sound of the projector.
Only on laser pointer remote control
To activate the laser pointer to indicate items on the screen.
Note:The laser pointer sends out a laser beam. Do not look into this beam!
Exit point of laser pointer.
Stand by On 1
Mouse Left/Right 2
Volume + 3
Menu 4
Source 5
D(igital)-Freeze 6
D(igital)-Zoom 7
A(udio)/V(ideo) Mute 8
Cursor Control 9
Note
OK 0
Mute !
Laser @
Laser pointer #
Philips Multimedia Projector 8 English User guide bSure1 / bSure 2
<Remote control
VOLUME
OKMENU
MUTE
D-ZOOMD-FREEZESOURCE
MOUSE RightLeft
Volume
OKMenu
Stand by
On
Mute
D-ZoomD-FreezeSource
Mouse RightLeft
AV MUTE
AV MUTE
AV Mute
1
2
3
4
!
5
6
0
9
8
7
VOLUME
OKMENU
Stand by
On
D-ZOOMD-FREEZESOURCE
MOUSE RightLeft
Volume
OKMenu
Laser
Stand by
On
D-ZoomD-FreezeSource
Mouse RightLeft
2
3
#
1
5
8
4
9
0
6
7
AV MUTE
AV Mute
@
6
Compact remote control Laser pointer remote control
Data source connections
Input socket to connect to the Data out terminal of a computer.
Input socket to connect to the Audio out terminal of a computer.
In-/Output socket to connect a PC or Apple Macintosh computer equipped with a USB
downlink connection.When USB connection is used the mouse cursor on the connected
computer can be controlled via the projector remote control. Make sure Windows 98,
Windows ME, Windows 2000 or Windows XP is installed on the computer.
When the bSure2 Brilliance projector is connected to the computer via the USB socket, audio
information from the computer will be heard via the projector speaker.
In-/Output socket to connect a PC or Apple Macintosh computer equipped with a PS/2
connection. When PS/2 connection is used the mouse cursor on the connected computer can
be controlled via the projector remote control.
Video source connections
Input sockets to connect to DVD- and HDTV-video equipment
These sockets can be connected to the following output sockets: RGB-Y, YCbCr, YPbPr
(480p, 720p, 1080 i).
Input socket to connect to the Video out socket of a video recorder, Laser Disc player, video
camera, DVD player, or TV with AV output socket.
This socket can be connected to CVBS output sockets.
Input sockets to connect to the Audio out sockets of a video recorder, laser disc player, video
camera or TV with A/V output socket.
Input socket to connect to the S-Video out socket of a S-VHS video recorder, a VCR,
Laser Disc player, DVD player, video camera or TV with AV output socket.
This socket can be connected to a S-Video/S-VHS (Y/C) output socket.
Computer 1
Audio in Computer 2
USB (upstream) 3
Note
PS/2 4
Component in 5
Video 6
Audio L/R 7
S-Video 8
Philips Multimedia Projector 9 English User guide bSure1 / bSure 2
2. Functional overview
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Computer Audio in Computer
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Computer Audio in Computer
134
2
5
6
78
<Connections
3. Set up >
Place the projector on a stable, level surface, out of direct sunlight and away from sources of
excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields.
Allow sufficient cooling of the product by keeping all air inlets and outlets clear from
obstructions.
Position the projector in such way that the viewers cannot watch into the projector light beam.
Choose a screen size suitable for the number of viewers and the size of the room.
Picture quality is best when you sit directly in front of the projector screen.
The projector can be used for both front projection, rear projection and ceiling projection
applications. As default factory setting, the projector has been set up for front projection.You
can change to rear or ceiling projection via the Mirror function in the Picture menu.
1 Insert the mains lead into the projectors Mains inlet socket and connect it to the wall socket.
The Standby indicator lights up red, the projector is now in the Power/Standby mode.
2 Remove the lens cap.
3 Press any button on projector or remote control to switch on the projector.
The Standby indicator lights up orange.
When the projection lamp is on, the Standby indicator lights up green and the start-up
screen appears for several seconds.
4 Press the Standby button to switch the projector back into the Power/Standby mode.
The Standby Warning screen will appear for 20 seconds.
The Standby Warning screen can be removed by pressing the OK button.
5 Press the Standby button again to confirm.
The projector will now go into Power/Standby mode.
You can also press the Standby button twice in succession to switch the projector into Power/Standby
mode immediately.
6 To switch off the mains supply completely, disconnect the mains lead.
Save energy! Please put the projector in the Power/Standby position if you are not going to use the
projector for more than 15 minutes.
When no signal inputs are detected for 30 minutes, the projector automatically switches
to Power/ Standby (Auto Standby).This setting can be changed in the ‘Settings’ menu
Before disconnecting the mains lead, make sure that the cooling fan has stopped
(about 3 minutes after the projector has been switched to Power/Standby).
Positioning the projector
and screen
Switching on the projector
Notes
Philips Multimedia Projector 10 English User guide bSure1 / bSure 2
SCREEN
SCREEN
SCREEN
SCREEN
Front projection Ceiling front projection
Rear projection Ceiling rear projection
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Warning

If the projector is switched off you have to 
wait 1 minute before switching on the 
projector again to allow adequate time 
for the lamp to cool down.
Press stand-by key again to confirm.
Press OK key to remove this warning.
PHILIPS
PHILIPS
PHILIPS
Multimedia Projectors
Multimedia Projectors
Use the Zoom ring to adjust the size of the image.
Use the Focus ring to adjust the focus of the image.
To raise:
Keep knob A pressed and lift to raise the projector.
The Height/Level Adjuster B will come out.
To Lower:
Keep knob A pressed and gently lower the projector.
Use the Focus Ring and Zoom Ring to readjust the focus and size of the image.
If projector and screen are not properly placed, the picture will be distorted, producing a
keystoned image (picture top width larger than picture bottom width or vice versa).When a
keystoned image occurs the 4:3 ratio will still be guaranteed.This is especially important when
the projector is being used together with an intelligent whiteboard.
Keystone correction allows you to correct picture distortion of the vertical keystone type by
internal scaling.This correction function is accessible through the Keystone Correction option in
the Settings menu of the On Screen Display (OSD) menu.
Preparation
1 Press the Standby button twice to put the projector in Power/Standby.
The Standby indicator starts blinking orange.
2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
3 Put the lens cap back in place to prevent dust, dirt or other contamination from harming or
damaging the front of the projector lens when moving the projector.
Never place the projector on the side where the connections are located.
Moving/transporting the projector
The projector contains many glass and precision parts. If you need to transport the projector,
please follow these packing instructions to pervent accidental damage to the projector.
When you are hand-carrying the projector, be sure to use a carrying case like the optional
softbag.
When shipping the projector, use the original packaging material if possible. If you do not
have the original packaging, use equivalent materials, placing plenty of cushioning around the
projector.
When transporting the projector as freight or checked luggage, first put it in a carrying case,
then pack it in a firm box, using cushioning around the case.
1 Push and slide the lid in the direction of the arrow.
2 Install two AAA batteries as indicated inside the battery compartment.
3 Replace the lid and snap it into place.
The maximum range of the remote control is approximately 15 m (± 50 feet).
Adjusting the focus and
size of the image
Adjusting the vertical angle
of the projector
Keystone correction
Moving/transporting the
projector
Note
Philips Multimedia Projector 11 English User guide bSure1 / bSure 2
3. Set up
Focus ring
Zoom ring
P
S
/2
U
S
B
A
u
d
i
o
L
A
u
d
io
R
V
i
d
e
o
Y
P
b
P
r
G
B
R
S
-V
i
d
e
o
D
a
t
a
A
u
d
io
in
D
a
t
a
P
S
/2
U
S
B
A
u
d
i
o
L
A
u
d
io
R
V
id
e
o
Y
P
b
P
r
G
B
R
S
-
V
i
d
e
o
D
a
t
a
A
u
d
io
in
D
a
t
a
A
B
>
Inserting the batteries in
the remote control
Note
Computer input
The computer input is suitable for both Apple Macintosh computers (Power Book and Power Mac) as
well as for IBM compatible PCs.The projector is Microsoft (R),Windows (R) 95/98/ME/2000/XP
compatible and accepts input signals from all computers that meet following specifications:
Multi scan VGA-SXGA
Horizontal scan rate: 15-108 kHz
Vertical refresh rate: 50-120 Hz
Bandwith: 140 MHz
Display Data Channel DDC: 1/2B
The data output of IBM compatible PCs can be connected directly to the projector using standard data
cables.When connecting the projector to a Macintosh computer equipped with a 2 row, 15 pin
connector a VGA/MAC adaptor (available at your PC store) is required. If your computer is equipped
with a 3 row connector no adaptor is needed.
Universal Serial Bus (USB)
The Universal Serial Bus (USB) connector allows you to connect to computers equipped with a USB
interface, resulting in real hot plug and play presentation.
Mouse control:
By connecting USB, the mouse function on the Remote Control automatically gets installed.
You can now manipulate the mouse cursor on the computer and on the screen, using Cursor Control
on the remote control.The Mouse Left/Right keys on the remote control function as Left and Right
mouse keys of your pc.
Audio (only with bSure2 Brilliance version):
Audio information from the computer will be heard via the projector speaker.
Drag and drop facility:
Drag and drop via the remote control works slightly different than via the pc mouse. Here how:
Use Cursor Control to select the item to be moved.
Press and keep pressed Mouse Left.
Use Cursor Control to move the selected item.Then release Mouse Left.
The item will now be moved.
Press Mouse Left when the item reaches the required location.
The item will now be dropped.
Theft deterrence
The SecurityMax application, supplied on the CD-ROM, allows you take a number of precautions
against unauthorized use of your projector. Once the application is installed, you can, for example, set
your own code protected personal start-up screen and shutdown timer which make theft unattractive
to any potential thief.You only need to run the Security Max software on the pc that is connected to
your projector via the Universal Serial Bus. For this see the Security Max user guide on the
CD-ROM.
Mouse control and drag and drop is also possible when PS/2 connection has been made.
Based on the specific hardware and software configuration available, Apple Macintosh computer users
could experience incomplete or erratic USB -functionality.These problems are not related to the
performance of your projector.
External monitor connection
A separate external monitor (or a second projector) can be connected to the projector.The image
projected is simultaneously shown on the monitor, even when the projector is in Power/Standby or Off
mode.
Video input
The projector accepts the input signal of all major video formats, including NTSC 3.58, 4.43, PAL B, G,
D, H, I, N, M and SECAM signals.The projector will recognize these standards and adapt to them
automatically.With the Picture format feature you can select one of five picture format options 4:3,
16:9, 16:9 enlarged, 4:3 on a 16:9 screen or 16:9 on a 4:3 screen.
Always switch off projector and external equipment before making any connections.
General information
Notes
CAUTION
Philips Multimedia Projector 12 English User guide bSure1 / bSure 2
4. Installation <General information
>
PC/Macintosh
1 Connect the Data (out) socket of the computer to the Computer (in) socket of the
projector and secure the plugs by tightening the thumb screws.
For this, use the VGA/USB cable supplied (1a).
2 Connect the USB (upstream) socket of the projector to the USB downstream port of the
computer.
For this, use the VGA/USB cable supplied (1b).
or:
2 Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer.
For this, use an optional PS/2 cable (2).
When switching on, first switch on the projector and then the PC.
You can now manipulate the mouse cursor on the computer and on the screen, using
Cursor Control on the remote control.When using the USB connection, make sure
Windows 98,Windows ME,Windows 2000 or Windows XP is installed on the computer.
The display settings of the computer will be changed to fit the capability of the projector.
Audio information from the computer will now be heard via the projector speaker (only
with bSure2 Brilliance version):
3 If required you can connect the Audio out socket of the computer to the Audio in
Computer socket of the projector.
For this use an optional audio cable (3).
Audio information from the Computer will then be played via the projector speaker.
Philips Multimedia Projector 13 English User guide bSure1 / bSure 2
4. Installation
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Data Audio in Data
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video
Computer
Audio in Computer
Audio out
Data out
Mac/PC
USB
Philips VGA/MAC adapter
1b3
1a
2
5
PS/2
For external monitor
connection only
Projector
Projector
5
4a
PROJECTOR
PROJECTOR
COMPUTERCOMPUTER
4b
4b
4a
4a
MONITOR
MONITOR
4c
4c
Connecting to a computer
Connecting to an external monitor
1 Connect the VGA Y connector marked Projector (4a), of an optional VGA Y-cable, to the
Computer (in) socket of your projector.
2 Connect the VGA cable supplied (1a) between the computer and the VGA Y connector
marked Computer (4b).
3 Connect the VGA Y connector marked Monitor (4c) to the VGA cable (5) of the monitor.
4 Switch on your Computer.
5 Switch on the projector.
6 Select Computer input, using the Source button.
–‘Computer appears on the screen.
7 Press Menu.
The menu bar appears on the screen.
8 Use Cursor Control to select Settings in the menu bar.
9 Use Cursor Control to select Monitor out.
10 Use Cursor Control to select On.
The projector will indicate the necessity to connect the Y-cable.
11 Switch on the external monitor.
The image projected is simultaneously shown on the monitor.
Philips Multimedia Projector 14 English User guide bSure1 / bSure 2
4. Installation
Computer
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Off On
Display
Language
Kestone correction
Monitor out
System information...
Factory reset
Key lock
(more)
Picture Audio Settings
Monitor out is to be activated if an extra monitor
is connected to the projector. Otherwise it should 
be de-activated and no special Y-cable should be 
connected.
Settings
Display
Language
Keystone correction
Monitor out
System information...
Factory reset
Key lock
(more)
Picture Audio
<Connecting to a computer
>
1 Connect the Video (out) socket of a VCR, Laser Disc player, video camera or TV to the
Video (in) socket of the projector.
For this, use the video/audio connection cable (1a) supplied.
2 Connect the Audio out L/R sockets of the VCR, Laser Disc player, video camera or TV to
the Audio (in) L/R sockets of the projector.
For this, use the audio/video connection cable supplied (1b).
1 Connect the S-Video (out) socket of a S-VHS video recorder, Laser Disc player, video
camera or TV to the S-Video (in) socket of the projector.
For this use an optional S-Video connection cable (2).
2 Connect the Audio out L/R sockets of the S-VHS video recorder, Laser Disc player, video
camera or TV to the Audio (in) L/R sockets of the projector.
For this, use audio/video connection cable supplied (1b).
CVBS
1 Connect the Scart/RCA Audio Video adapter supplied to the Scart connector of the VCR,
Laser Disc player, video camera or TV.
2 Plug the video/audio connection cable supplied into both the adapter and the Video and
Audio (in) L/R sockets of the projector.
S-VHS
3 Plug an optional S-Video connection cable into the VCR and the S-Video socket of the
projector.
CVBS
S-VHS
Scart connection
Scart adapter
(not for USA version)
Scart adapter
(not for USA version)
Philips Multimedia Projector 15 English User guide bSure1 / bSure 2
4. Installation
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video
Computer
Audio in Computer
L Audio R
out
S-Video
out
VCR
Video
out
1a 2 S-VHS only
CVBS only
CVBS only
CVBS only
CVBS only
1b
S-Video
Connecting to video equipment
>
Pr,Y, Pb/Cr,Y, Cb
1 Connect the Component in sockets of the projector to the appropriate output sockets of
your Component- or HDTV-video equipment (Pr,Y, Pb / Cr,Y, Cb).
For this, use the audio/video connection cable supplied (1).
2 If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (2).
Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Component/HDTV
Philips Multimedia Projector 16 English User guide bSure1 / bSure 2
4. Installation
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video
Computer
Audio in Computer
Component/HDTV
equipment
Cr
Pr
R
Y
Y
G
Cb
Pb
B
R
Audio
out
L
DVD player, Settop Box,
HDTV receiver, etc.
1
2
Connecting to video equipment
<
RGBS
1 Connect an optional Scart/RCA Component Video adapter (1) to the Scart connector of
your Component- or HDTV-video equipment
2 Connect the Component in sockets of the projector to the R, G and B outputs of the
adapter.
For this, use the audio/video connection cable supplied (2).
3 Connect the Video input of the projector to the Y output of the adapter.
For this, use an optional audio/video connection cable (3).
4 Select RGBS input by pressing the Source button.
–‘RGBS appears on the screen.
5 If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (4).
Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Scart connection
Philips Multimedia Projector 17 English User guide bSure1 / bSure 2
4. Installation
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video
Computer
Audio in Computer
DVD player,
Settop Box, etc.
R
Audio
out
L
Component/HDTV
equipment
2
3
4
1
RGBS
Connecting to video equipment
<
1 Press the Standby button to switch on the projector.
The Standby indicator lights up orange.
When the projection lamp is on, the Standby indicator lights up green and the start-up
screen (when enabled) appears for several seconds.
2 Select the required source (Computer, Component, RGBS, S-Video,Video) by pressing the
Source button.
When only one input source is connected, this source will automatically be selected (Auto Source).
When more input sources are connected, the source with the highest priority will be selected
(Computer, Component, RGBS, S-Video, Video). Source selection can be changed in the Settings menu.
3 Switch on the computer or start video playback.
A feedback message appears on the screen, indicating the selected source.
General explanation
Messages are displayed in the centre of the screen.The problem is described in the header of
the message display. Suggestion(s) to solve the problem are displayed in the gray part of the
message display.
These messages cannot be suppressed.
Feedback messages
Feedback messages are displayed in the top right corner of the screen.They are displayed when:
a signal comes up or goes down;
when an input source is changed;
when Mute or A/V Mute is activated;
when the Auto image function is set to On.
Some examples
These messages will only be displayed when the menu option Feedback is set to On in the
Settings menu. All messages will be removed automatically after 4 seconds.
General
Note
Messages
Philips Multimedia Projector 18 English User guide bSure1 / bSure 2
5. Operation
pj
PHILIPS
PHILIPS
PHILIPS
Multimedia Projectors
Multimedia Projectors
Fan error
The projector will switch off automatically.
Please:
1. Check whether the filter door is properly closed
If the problem persists in spite of the above, please
contact a service centre for repair.
Computer
Video
No signal
S-Video
A/V Muted
Component
video
A/V Muted
Computer selected as source Video selected as source, S-Video selected as source, Component selected as
no input signal A/V muted source A/V muted
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Preparation
>
All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays
and with help of Menu, OK and Cursor Control on the projector or the remote control.
The projector is set to standard settings at the factory. However, you can adjust these settings to
suit your own preferences.
The projector menu screens allow you to adjust the various projector settings (for both
Computer and Video). For explanation and operation see next pages.
COMPUTER MODE
Main menu Sub menu Setting
Display Digital Freeze Off On
Digital Zoom Off On
Magnification min max
Auto Image Off On
Horizontal Size min max
Phase min max
Shift Cursor controlled Shift
Picture Brightness min max
Contrast min max
Mirror
Colour tracking vivid natural
Colour temperature warm cool
Red min max
Green min max
Blue min max
VIDEO/S-VIDEO MODE
Main menu Sub menu Setting
Display Digital Freeze Off On
Digital Zoom Off On
Magnification min max
Picture Brightness min max
Contrast min max
Hue (NTSC only) min max
Saturation min max
Sharpness sharp soft
Mirror
Picture format 4:3, 16:9, 16:9 enlarged
4:3 on a 16:9 screen
16:9 on a 4:3 screen
Colour tracking vivid natural
Colour temperature warm cool
Red min max
Green min max
Blue min max
AB
A
B
AB
AB
AB
A
B
AB
AB
Menu tree
Philips Multimedia Projector 19 English User guide bSure1 / bSure 2
5. Operation
Display
Brightness
Contrast
Hue
Saturation
Sharpness
Mirror
(more)
min
Move pointer left or right to adjust the contrast level.
Picture Audio Settings
max
Display
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift . . .
Shift is used to adjust the position of the image.
Press OK key to activate Shift.
Picture Audio Settings
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Display
(previous)
Picture format
Colour tracking
Colour temperature
Red
Green
Blue
min
Move pointer left or right to adjust the Red level.
Picture Audio Settings
max
On Screen Display Menu
GENERAL ADJUSTMENTS/SETTINGS
Main menu Sub menu Setting
Audio Volume Min Max
Bass Min Max
Treble Min Max
Mute Off On
Settings Language
Eng.
Esp.
Deu.
Fra.
Por.
Ita.
Chi.
Keystone correction
Monitor out Off On
System information OK
Factory reset OK
Key lock OK (3 sec.)
Start-up screen Off On
For bSure2 Brilliance projectors only Default, Off, Custom,
Load
Lamp counter OK (3 sec.)
Auto Standby Off 15 30 45 60 120
Auto Source Off On
Feedback Off On
Menu tree
Philips Multimedia Projector 20 English User guide bSure1 / bSure 2
5. Operation
Settings
Display
Language
Keystone correction
Monitor out
System information...
Factory reset
Key lock
(more)
Picture Audio
Settings
Display
Volume
Bass
Treble
Mute
Picture Audio
Settings
Picture Audio
Off
On
The Start-up screen can be shown or suppressed
during start-up.
Display
(previous)
Start-up screen
Lamp counter
Auto Standby
Auto Source
Feedback
>On Screen Display Menu
>
1 Press Menu.
The menu bar appears on the screen.
The first item is highlighted and its sub menu is shown.
Depending on the selected source (Computer, Component, RGBS, S-Video,Video) some
options of the submenu may be greyed out.This indicates that these functions:
are not available in a certain mode,
have no function for the selected source.
For example:
Horizontal size under menu Display when Auto image is switched to ON.
Hue under menu Picture when signaltype is not NTSC.
2 Use Cursor Control left and/or right to move the cursor to any other item in the menu bar.
3 Select the sub menu item to be adjusted using Cursor Control up and/or down.When
more items are available than can be shown in one screen, this will be indicated by more at
the bottom of the list. Move the cursor down to go to the next list of items.With previous
you can go back to the first list.
4 Adjust the selected item in the action window at the bottom of the screen, using Cursor
Control left and/or right.
5 Select the next item to be adjusted in the sub menu and adjust as described above.
6 Press Menu to close the On Screen Display.
General explanation
Philips Multimedia Projector 21 English User guide bSure1 / bSure 2
5. Operation
Display
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift . . .
Picture Audio Settings
Display
(previous)
Picture format
Colour tracking
Colour temperature
Red
Green
Blue
min
Move pointer left or right to adjust the Red level.
Picture Audio Settings
max
Display
Brightness
Contrast
Hue
Saturation
Sharpness
Mirror
(more)
min
Move pointer left or right to adjust the contrast level.
Picture Audio Settings
max
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
On Screen Display Menu
>
For computer signal input, the following Display and Picture adjustments can be made.
Display adjustments
Press Menu and select Display in the menu bar.The following Display adjustments can now
be made according to the instructions under General explanation:
Digital Freeze
captures a moving picture (still picture);
Digital Zoom
enlarges a part of the picture;
Magnification
adjusts the zoom factor;
Auto image
automatically sizes and positions the image to fit optimally in the screen picture;
Horizontal size
adjusts the computer image in a horizontal direction to make the image completely fill the
screen;
Phase
minimises picture imperfections.When connecting the projector to your PC for the first
time, be sure to adjust the phase control for optimal readability of the projected text;
Shift
adjusts the computer image in horizontal and vertical direction to centre it on the screen.
Some examples
The following Display adjustment procedures, follow a slightly different sequence of actions, or
may need some further explanation.
Digital Zoom/Magnification
Digital Zoom is used to enlarge a part of the picture.
1 Press Menu.
The menu bar will appear.
Display is highlighted and its sub menu is shown.
2 Use Cursor Control to move the cursor to Digital Zoom.
3 Select On to switch Digital Zoom on.
Press OK to continue, or
Press Menu to exit and continue with the previous Zoom settings.
4 Use the zoom target to select centre of the screen area you wish to enlarge.
Press OK to confirm.
5 Use the Magnification slider to adjust the Zoom factor.
Press OK to confirm and exit the menu.
6 Use Cursor Control to select another section of the enlarged area (Panning).
By pressing the D(igital) Zoom button on the remote control you enter directly into the zoom centre
selection screen (step 4). When Digital Zoom is already active, pressing the D(igital) Zoom button will
show the Magnification slider; pressing the D(igital) Zoom button twice will turn off Digital Zoom.
Auto image
The Auto Image function automatically sizes and positions the image to fit optimally in the
screen picture. In addition it takes care for phase adjustment. It does not affect the selected
picture format. When Auto Image is set to On, the Horizontal size, Shift and Phase options are
greyed out.
Horizontal size
The Horizontal size function is used to size a computer image to make it fit the projected
picture.When the OSD menu is active and the horizontal size option is selected, the level will
be indicated graphically on a linear scale (slider).
Computer adjustments
Tip for Windows users
To adjust size and phase correctly
1 Select Start and then Shut down
from the Windows Taskbar.
2 Adjust the projectors size
control, so that no vertical
bars are visible.
3 Now adjust the projectors phase
control for maximum brightness
of the projected image.
4 Press No in the Windows
shutdown screen to cancel
the shutdown action.
Note
Philips Multimedia Projector 22 English User guide bSure1 / bSure 2
5. Operation
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
off
on
Display
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift...
Digital Zoom is used to enlarge part of the picture.
Audio Settings
Picture
On Screen Display Menu
>
Shift
The Shift function adjusts the computer image in horizontal and vertical direction to centre it on
the screen.This function is only active when Auto image is set to Off .
1 Press Menu.
The menu bar appears on the screen.
–‘Display is highlighted and its sub menu is shown.
2 Use Cursor Control to move the cursor to Shift.
3 Press OK to activate Shift.
4 Use Cursor Control to position the computer image.
5 Press OK to confirm and store the adjustment.
6 If required, select the next item to be adjusted or press Menu to exit.
Picture adjustments
Press Menu and select Picture in the menu bar. The following Picture adjustments can now
be made according to the instructions under General explanation:
Brightness
adjusts brightness of the displayed picture;
Contrast
adjusts the overall contrast intensity;
Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
Colour tracking
selects between Vivid and Natural representation of colours in the picture.
Vivid is automatically set when computer input is used;
Natural is automatically set when video input is used.
Colour Temperature
adjusts the overall colour impression from warm to cool.
The various colours (red, green and blue) can also be adjusted individually.
Computer adjustments
Philips Multimedia Projector 23 English User guide bSure1 / bSure 2
5. Operation
Display
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift . . .
Shift is used to adjust the position of the image.
Press OK key to activate Shift.
Picture Audio Settings
Move pointer to position the image.
Press OK key when done.
Shift
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Display
(previous)
Picture format
Colour tracking
Colour temperature
Red
Green
Blue
min
Move pointer left or right to adjust the Red level.
Picture Audio Settings
max
Display
Brightness
Contrast
Hue
Saturation
Sharpness
Mirror
(more)
min
Move pointer left or right to adjust the contrast level.
Picture Audio Settings
max
On Screen Display Menu
>
For Video/S-Video signal input, the following Display and Picture adjustments can be made:
Display adjustments
Press Menu and select Display in the menu bar. The following Display adjustments can now
be made according to the instructions under General explanation.
For adjustment of Digital Zoom/Magnification, see explanation under Data adjustments.
Digital Freeze
captures a moving picture (still picture);
Digital Zoom
enlarges a part of the picture;
Magnification
adjusts the zoom factor.
Picture adjustments
Press Menu and select Picture in the menu bar. The following Picture adjustments can now
be made according to the instructions under General explanation:
Brightness
adjusts brightness of the displayed picture;
Contrast
adjusts the overall contrast intensity;
Hue (only for NTSC)
adjusts the tint of the projected image;
Saturation
adjusts the colour saturation of the projected image;
Sharpness
controls the contour impression of the picture;
Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
Picture Format
selects one of five picture format options (4:3, 16:9, 16:9 enlarged, 4:3 on a 16:9 screen or
16:9 on a 4:3 screen);
Colour tracking
selects between Vivid and Natural representation of colours in the picture.
Vivid is automatically set when computer input is used;
Natural is automatically set when video input is used.
Colour Temperature
adjusts the overall colour impression from warm to cool.
The various colours (red, green and blue) can also be adjusted individually.
Video/S-Video adjustments
Philips Multimedia Projector 24 English User guide bSure1 / bSure 2
5. Operation
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Picture Audio Settings
Display
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift . . .
Display
Brightness
Contrast
Hue
Saturation
Sharpness
Mirror
(more)
min
Move pointer left or right to adjust the contrast level.
Picture Audio Settings
max
Display
(previous)
Picture format
Colour tracking
Colour temperature
Red
Green
Blue
min
Move pointer left or right to adjust the Red level.
Picture Audio Settings
max
On Screen Display Menu
>
Audio adjustments
Press Menu and select Audio in the menu bar. The following Audio adjustments can now be
made for both Computer, Component and Video/S-video input, according to the
instructions under General explanation:
Volume
adjusts the sound level;
Bass
adjusts the bass tones;
Treble
adjusts the high tones;
Mute
mutes the sound of the projector.
The volume can also be adjusted with the Volume + keys on the remote control and local keyboard.
General adjustments
Philips Multimedia Projector 25 English User guide bSure1 / bSure 2
5. Operation
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Settings
Display
Language
Keystone correction
Monitor out
System information...
Factory reset
Key lock
(more)
Picture Audio
Settings
Display
Volume
Bass
Treble
Mute
Picture Audio
Settings
Picture Audio
Off
On
The Start-up screen can be shown or suppressed
during start-up.
Display
(previous)
Start-up screen
Lamp counter
Auto Standby
Auto Source
Feedback
On Screen Display Menu
The projector is equipped with the following functions to optimize its use and handling:
Press Menu and select Settings in the menu bar.The following settings/adjustments can now
be made for both Computer, Component and Video/S-video input, according to the
instructions under General explanation:
Language
To select the required menu language;
Keystone correction
To correct picture distortion of the vertical keystone type by internal scaling;
Monitor out
Enables image on second monitor connected;
System information
The System Information sub menu contains an overview of the most relevant projector
settings, including information on the hardware and software configuration;
Factory reset
To reset all user settings to the default factory settings;
Key lock
To de-activate all remote and local controls.To disable the keylock function keep the OK
button pressed for 10 seconds;
Start-up screen
To display (On) or suppress (Off) the default Philips start-up screen upon the projectors
start up.
For bSure2 Brilliance projectors only: To display (Default) or suppress (Off) the default Philips
start-up screen upon the projectors start up and to select (Custom) and store (Load) a
start-up screen of your own choice.
Lamp counter
To show the operating time of the lamp, which can be reset after a new lamp has been
installed;
Auto Standby
To switch off Auto Standby mode or to select the delay time after which the projector
automatically switches to Standby;
Auto Source
To switch automatic source selection on or off;
Feedback
To suppress OSD messages. Warning or error messages however are never suppressed.
General settings
Loading your own personal start-up screen
(for bSure2 Brilliance projectors only)
All settings described under Other settings can be made according to the instructions under
On Screen Display Menu - General explanation. Loading your own personal start-up screen
however follows a slightly deviant procedure which we will describe hereafter.
You can load any image as long as the size of the image does not exceed 128 Kb.The more
detailed the image is the larger its size will be.The image must be projected on the screen.
1 Press Menu.
The menu bar appears on the screen.
2 Use Cursor Control to move the cursor to Settings.
3 Select Start-up screen by using Cursor Control.
4 Select Load if you wish to load the currently shown image and store it as start-up screen.
The menu bar disappears and the image is shown.
5 Press OK to display the capture window.
The capture window (red oblong) shows you what part of the image will be loaded.
6 With Cursor Control you can move the window to select the part of the image you wish
to load.
Press OK if you wish to resize the capture window in order to make the image fit in the
window.You can use Cursor Control to adjust the size of the window.
7 Keep OK pressed for 3 seconds to confirm.
–‘Capturing appears on the screen and the image will now be loaded.The loading time is
dependent on the size of the image and may take up to a few minutes.
When the image is loaded Capture complete and Please reset projector appear on the
screen.
8 You will now have to reset the projector. For this see Resetting the projector hereafter.
Philips Multimedia Projector 26 English User guide bSure1 / bSure 2
5. Operation On Screen Display Menu >
Settings
Display
Language
Keystone correction
Monitor out
System information...
Factory reset
Key lock
(more)
Picture Audio
Default
Settings
Picture Audio
Press Ok to display the capture window.
Display
(previous)
Start-up screen
Lamp counter
Auto Standby
Auto Source
Feedback
Default
Off
Custom
Load...
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Move window to select the area to be captured.
Press OK key to resize the capture window.
Keep OK key pressed for 3 seconds to confirm
capture of (new) Custom image.
Press Menu key to return to the menu.
Capture complete.
Please reset projector.
Resetting the projector
1 Press the Standby button twice in succession to switch the projector into the Power/Standby
mode.
2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been
switched to Power/Standby).Then disconnect the mains lead to switch off the mains supply.
3 Connect the mains lead again and press the Standby button to switch the projector back
into Power/Standby mode.
The Standby indicator lights up red, the projector is now in the Power/Standby mode.
4 Press any button on projector or remote control to switch on the projector.
The Standby indicator lights up orange.
When the projection lamp is on, the Standby indicator lights up green and your personal
start-up screen appears.
Your personal start-up screen will appear each time the projector is switched on exept when the
SecurityMax
application has been activated.The
SecurityMax
start-up screen will then appear.
Note
Philips Multimedia Projector 27 English User guide bSure1 / bSure 2
5. Operation On Screen Display Menu <
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
>
Switch off and disconnect the projector before cleaning.
1 Press the Standby button twice to switch off the projector.
The Standby indicator starts blinking orange.
2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
Cleaning the cabinet
When the cabinet is dusty, clean it by gently wiping with a soft cloth.
A chamois leather slightly moistened with water is sufficient for cleaning the housing.
Do not use cleaning agents as they may harm the housing.
Cleaning the lens
When the lens is dirty or dusty, first blow the dust off and then gently wipe with a soft
brush or lens cleaning paper. Never touch the lens with your fingers.
The lens is likely to become mouldy if left dirty.
Cleaning the dust filter
Make sure to clean the dust filter regularly.
1 Switch off the projector and wait until the cooling fan has stopped before disconnecting the
projector.
2 Turn the projector over. Never place the projector on the side where the connections are
located!
3 Press tab A and remove filter holder B from the projector.
4 Press clamp C, open the holder and remove the filter.
5 While firmly holding the filter, gently remove any accumulated dust, from the dusty side, with
a vacuum cleaner.
6 Press clamp C, put the filter back in place and release clamp C. Firmly press the filter edges
in place.
7 Close the filter holder.
8 Press tab A and insert the filter B into the projector.
We advise you to clean the filter every 100 hours. Operating the projector without filter or with a torn
or damaged filter may seriously damage the projector.
When the filter is damaged replace it with a filter of the same type (12 nc: 3122 434 0157 0).
The projector power cannot be switched on again unless the filter holder is installed correctly.
Cleaning
Caution
Important
Notes
Philips Multimedia Projector 28 English User guide bSure1 / bSure 2
6. Maintenance
A
B
C
C
A
B
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
>
When operation time reaches the last 100 hours of the average lamplife, the message Warning:
lamplife has almost expired will be displayed on the screen, each time the projector is switched
on.The lamp indicator lights up orange.
The lamplife remaining can be checked using the OSD menu.
1 Press Menu.
The menu bar appears on the screen.
2 Use Cursor Control to move the cursor to Settings.
3 Use Cursor Control to select Lamp counter.
The remaining lamplife hours are displayed in the action window at the bottom of the
screen.
When the lamplife has expired, the lamp indicator lights up red and the message
Warning: lamplife has expired is displayed on the screen.
1 Switch off the projector and wait until the lamp has cooled down (about 5 minutes) before
disconnecting the projector. Remove the mains lead from both projector and wall socket.
The mains lead must be disconnected from the projector otherwise the lamp door
cannot be removed.
2 Turn the projector over. Never place the projector on the side where the connections are
located!
3 Push tab A to the right and remove the lamp door.
When tab A is pressed the mains inlet socket will be partly closed. The lamp door therefore
cannot be removed if the mains lead is not disconnected from the projector.
4 Read the caution and warning labels on the lamp holder.
Lamp
Lamp Replacement
Philips Multimedia Projector 29 English User guide bSure1 / bSure 2
6. Maintenance
Warning:
Lamplife has expired
It is suggested to change the lamp, to avoid sudden 
failure and to improve overall picture quality.
Picture Audio SettingsDisplay
(previous)
Start-up screen
Lamp counter
Auto standby
Auto source
Feedback
Lamp
5 Hours
Lamp counter shows the operating hours of the 
lamp. It is suggested to reset when a new lamp is 
inserted. To reset keep OK key pressed 
for 3 seconds.
Warning:
Lamplife has almost expired
It is suggested to have a spare lamp available. 
The lamp type is indicated in the user guide.
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
A
<
5 Unscrew screw B.
6 Grasp the lamp holder handle and carefully pull the lamp holder out of the projector.
Do not tilt. If the inner tube is broken glass particles may fall out.
Keep lamp holder opening to your right. Do not touch lamp or point lamp holder opening
at anyone.
7 Carefully remove the new lamp housing from its package.
Always use the same type of lamp: See Optional accessories for the correct type of lamp
for your projector.
Do not touch lamp or point lamp housing opening at anyone.
Do not drop, as the impact may cause the lamp to break.
8 Place the lamp holder in the guiding slots and insert into the lamp compartment.
9 Tighten screw B again.
10 Put the lamp door back in place and press tab A back in its original position.
The Mains inlet socket will open again.
11 Insert the mains lead into both the projector Mains inlet socket and the wall socket.
12 Press the Standby button to switch on the projector.
13 Reset the lamp life time (see Resetting the lamplife time).
14 Dispose of the old lamp in special chemical disposal bins.
1 Press Menu.
The menu bar appears on the screen.
2 Use cursor control to select Settings in the menu bar.
3 Use cursor control to select Lamp counter in the sub menu.
4 Press OK for 3 seconds to reset the lamp counter.
5 If required, select another item you wish to adjust or press Menu to exit.
Lamp replacement
Resetting the lamplife
time
Philips Multimedia Projector 30 English User guide bSure1 / bSure 2
6. Maintenance
B
B
A
Picture Audio Settings
Display
(previous)
Start-up screen
Lamp counter
Auto standby
Auto source
Feedback
Lamp
0 hours
Lamp counter shows the operating hours of the 
lamp. It is suggested to reset when a new lamp is 
inserted. To reset keep OK key pressed 
for 3 seconds.
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
>
If a fault occurs, first check the points listed below before taking the projector for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service
organisation.
Under no circumstances should you try to repair the projector yourself as this could invalidate the
guarantee.
Possible cause
Solution
General
Mains lead is not correctly connected.
Correctly connect mains lead.
The filter holder is not installed correctly or is damaged.
Install the filter holder correctly (see Cleaning the dust filter under Maintenance).
Lamp holder cover is not closed correctly or the lamp holder is damaged.
Close the cover correctly (see Lamp replacement under Maintenance).
Signal cable not correctly connected.
Connect signal cable correctly.
The projector is in Off position.
Press Standby to switch on the projector.
A/V Mute active.
Cancel A/V Mute.
–‘Shift and/or Horizontal size are not adjusted correctly.
Adjust Shift or Horizontal size (see Display adjustment under
Operation - On Screen Display Menu).
Activate the Auto-image function via the On Screen Display menu.
In Component Video mode
–‘Auto Image has not selected the correct settings for Shift and/or Horizontal Size.
Adjust Shift or Horizontal size (see Display adjustment under
Operation - On Screen Display Menu).
Activate the Auto-image function via the On Screen Display menu.
Reset all settings to the default factory settings with the Factory reset option in the
Settings menu.
Keystoning is applied on a high resolution component signal.
Decrease keystoning until the image is correctly displayed. For this use the Keystone
correction option in the Settings menu.
Warning
Read as follows
Problem
Image is not or incorrectly
displayed
Philips Multimedia Projector 31 English User guide bSure1 / bSure 2
7.Troubleshooting
>
In Data mode
Input resolution is too high (and keystoning is applied).
If you wish to keep the keystone correction, decrease the input resolution until the image is
correctly displayed. For this, refer to the User Guide or support information of the
computer.
If you wish to keep the input resolution as it is, decrease keystoning until the image is
correctly displayed. For this, use Keystone correction option in the Settings menu.
Input resolution is too high (and no keystoning is applied).
Decrease the input resolution until the image is correctly displayed. For this, refer to the
User Guide or support information of the computer.
In case of RGBS (Scart) connection:
RGBS is not selected or Auto Source is activated (does not recognize RGBS).
Select RGBS as projection source with the Source button on the projector or the remote
control.
Adjust Brightness, Contrast, Saturation or Hue (see Picture adjustment under Operation
- On Screen Display Menu).
Reset all projector settings in the Settings menu (Factory reset).
Image is not focused.
Adjust focus ring.
Distance between projector and screen is not correct.
Adjust the distance between the projector and the screen.
Signal cable is not correctly connected.
Connect signal cable correctly.
Signal cable is not correctly connected.
Connect signal cable correctly.
Audio cable is not correctly connected.
Connect audio cable correctly.
Volume is not adjusted properly.
Adjust volume.
(A/V-)Mute active.
Cancel (A/V-)Mute.
Distance is too great.
Reduce distance.
Batteries are exhausted.
Replace batteries (see Inserting the batteries in the remote control).
IR sensor is obstructed.
Remove obstacle.
Poor colour
Image is blurred
Picture rolls
No sound
The projector does not
react to commands from
the remote control
Philips Multimedia Projector 32 English User guide bSure1 / bSure 2
7.Troubleshooting
Lamp indicator
green: normal lamp condition.
orange: lamp life has almost expired (less than 100 hours to go).
See warning messages on the start up screen for details.
red: lamp life has expired.
Replace lamp. See Maintenance.
red (fast blinking): lamp start has failed.
Disconnect projector from the mains. Reconnect and restart. If this does not resolve the
problem, replace the lamp. See Maintenance.
Temperature indicator
red: temperature error.
The projector will go into Power/Standby mode. Allow the projector to cool down;
this may take up to 30 minutes. When the LED goes out press any button to activate the
projector again.
fast blinking red: fan error.
The projector will go into Power Standby mode. Make sure the filter cover is closed
properly; clean air inlets or dust filter and allow the projector to cool down; this may take
up to 30 minutes.When the LED stops flashing press any button to activate the projector
again.
Standby indicator (text on Standby button/ring around Standby button)
red: standby mode.
green: operation mode.
orange: warming up.
slow blinking (orange): cooling down.
Do not switch the projector off; it will restart the lamp automatically within a few seconds.
–’Monitor out has been enabled, but the external monitor is not correctly connected (the picture
on both displays is too bright).
Connect the (optional) VGA Y-cable (See Connecting to an external monitor under
Installation).
If the VGA Y-cable is correctly connected, verify whether the input impedance of the monitor
is correctly set on 75 Ohm.
–’Monitor out has not been enabled, but the external monitor is connected
(the picture on both displays is too dark).
Enable the Monitor out option. Press Menu and use cursor control to go to Settings in the
menu bar. Select Monitor out and select On.
–’Keylock active.
Press OK for 10 seconds to cancel Keylock.
Indicators
Picture too dark or bright
with external monitor
connected
No reaction when pressing
keys on local keyboard or
remote control
Philips Multimedia Projector 33 English User guide bSure1 / bSure 2
7.Troubleshooting >
General:
Check that the batteries are installed properly in the remote control and/or replace the
batteries.
Check that the projector receives the signals from the remote control.
Check that the USB cable or PS/2 cable has been properly connected.
Check that both projector and computer are switched on.
Unplug the USB cable or PS/2 cable and then reconnect.
In case of PS/2 connection:
The PS/2 mouse of the connected laptop has priority over the projector mouse loop through
connection.
Disable the PS/2 mouse of the laptop by selecting Disable in hardware profile in the
Windows Mouse Properties of the laptop.Then restart Windows on the laptop.
The projector mouse loop through connection now has priority while the laptop mouse can
still be used.
Switch off all devices and then reconnect while you make sure that you:
connect the PS/2 cable to PC and projector before switching on the PC;
switch on the projector before switching on the PC;
do not connect the USB cable when making the PS/2 connection.
Also refer to the User Guide or support information of your computer.
In case of USB connection:
Connect another USB device (mouse, scanner, webcam, etc.) and see if it works.
If it does not work there is a problem with the computer.
Also refer to the User Guide or support information of the computer.
–‘Windows did not manage to install the driver correctly. In this case the Device manager will
contain a catagory Other devices.
Disconnect the projector.
Remove all items listed under Other devices in the Device manager.
Restart the computer.
Reconnect the projector.
In case the computer asks for monitor drivers, install the drivers on the CD-ROM supplied
with the projector.
In case the computer asks for a USB-device driver, install the required drivers on the
CD-ROM supplied with the computer.
The size of the image exceeds 128 Kb.
Reduce the size of the capture window.
Select another image.
The mouse cursor does
not react when using the
cursor control on the
remote control
Computer asks for drivers
Image for personal start-
up screen cannot be
loaded
Philips Multimedia Projector 34 English User guide bSure1 / bSure 2
7.Troubleshooting <
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips lc3142 40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips lc3142 40 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info