ENGLISH 7
Important
◗ Read these instructions for use carefully and
look at the illustrations before using the
appliance.
◗ Keep these instructions for use for future
reference.
◗ Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
◗ Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips.Your guarantee
will become invalid if such accessories or
parts have been used.
◗ Do not use the appliance if the mains cord,
the plug or other parts are damaged.
◗ If the mains cord of this appliance is damaged,
it must always be replaced by Philips or a
service centre authorised by Philips, in order
to avoid hazardous situations.
◗ Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
◗ Do not exceed the quantities and preparation
times indicated in the table.
◗ Do not exceed the maximum content
indicated on the bowl, i.e. do not fill beyond
the top graduation.
◗ Unplug the appliance immediately after use.
◗ Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed
tube while the appliance is running. Only the
pusher is to be used for this purpose.
◗ Always unplug the appliance before reaching
into the blender jar with your fingers or an
object (e.g. a spatula).
◗ Keep the appliance out of the reach of
children.
◗ Never let the appliance run unattended.
◗ Place the lid on the bowl in the right position.
The build-in safety lock will now be deblocked
and you will be able to turn the appliance on.
Both the motor unit and the screw cap have
been provided with marks.The appliance will
only function if the dot on the motor unit is
placed opposite the dot on the screw cap.
◗ Switch the appliance off before detaching any
accessory.
◗ Always switch the appliance off by switching
to speed setting 0.
◗ Wait until moving parts have stopped running
before you remove the lid of the appliance.
◗ The screw cap can only be removed if the lid
is not on the bowl or if the bowl has been
removed altogether.
◗ Never immerse the motor unit in water or
any other fluid,nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
◗ Remove the protective cover from the blade
before use.
◗ Let hot ingredients cool down before
processing them (max.temperature
80cC/175cF).
◗ If you are processing a liquid that is hot or
tends to foam, do not put more than 1 litre
into the blender jar to avoid spillage.
