ENGLISH6
Food processor: parts and accessories
A Speed control
B Motor unit
C Built-in saftely lock
D Bowl
E Screw cap (for closing the blender fixing hole
when the blender is not in use)
F Tool holder
G Blender jar
H Peg of lid (activates and deactivates the safety
switch)
I Lif of bowl
J Feed tube
K Pusher
L Lid of blender jar
M Cover with closable insert storage space
N Slicing insert medium
O Slicing insert fime
P Shredding insert medium
Q Insert holder
R Blade (with protective cover)
S Kneading accessory
T Emulsifying disc
U Spatula
Introduction
This appliance has been equipped with an
automatic thermal cut-off system. This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1 Pull the mains plug out of the wall socket.
2 Press the 'PULSE / 0' button to switch the
appliance off.
3 Let the appliance cool down for
60 minutes.
4 Put the mains plug in the wall socket.
5 Switch the appliance on again.
Please contact your Philips dealer or authorised
Philips service centre if the automatic thermal cut-
out system is activated too often.
CAUTION: In order to avoid a hazardous
situation, this appliance must never be connected
to a timer switch.
Important
◗ Read the instructions for use carefully and
look at the illustrations before using the
appliance.
◗ Keep these instructions for use for future
reference.
◗ Check if the voltage indicated on the
appliance corresponds to the local mains
voltage (110-127V or 220-240V) before you
connect the appliance.
