C
◗ Screw the wall holder to the wall with the
screws supplied with the appliance.
◗ You can also place the vacuum cleaner and
the wall holder FLAT on a table during
charging.
C
◗ The crevice tool, floor nozzle,squeegee and
the stick can be attached to the wall holder
by pushing them into the appropriate
fastening slots.
Charging the appliance
1 Make sure that the slide switch of the
vacuum cleaner is in the off position (0)
during charging.The appliance will not
charge if the slide switch is in another
position.
2 Insert the charger plug into the wall
socket.
C
3 Always put the vacuum cleaner back onto
the holder after use to recharge the
batteries, even if the batteries are still
almost fully charged.
C
◗ The indicator light will come on to indicate
that the appliance is charging.
The indicator light will stay on as long as the
appliance is connected to the wall holder and the
plug is in the wall socket.
The indicator light does not give any information
about the charge level of the built-in batteries.
ENGLISH 7
