399726
11
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
3 Put the measuring cup in the lid, set the control knob to the highest speed and let the
appliance run for max. 40 seconds.
4 Set the control knob to 0 and remove the blender jar from the motor unit.
5 Pour out the drink through the spout of the blender jar (Fig. 9).
Make sure the lid is closed and the measuring cup is in the lid. This prevents pulp and skins from
ending up in your drink.
6 For optimal results, put the jar with the remaining ingredients back onto the appliance,
without opening/removing the lid. Then let the appliance run for a few more seconds.
7 Pour out the rest of the drink.
8 When you have nished processing, set the control knob to 0 and unplug the appliance.

- When you process a large quantity, we advise you not to put all the ingredients in the lter at
the same time. Start to process a small quantity and let the appliance run for a few seconds.
Then switch off the appliance and add another small quantity. Repeat this procedure until you
have processed all the ingredients. Always keep the lid on the blender jar during processing.
- To get the best result when you make fruit juices and cocktails, add approx. 300ml water to
150g fruit. You can also use other liquids, e.g. to make cocktails.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.

You can use the mill to grind and chop ingredients such as peppercorns, sesame seeds, rice, wheat,
coconut esh, nuts (shelled), coffee beans, dried soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
Do not exceed the maximum level indicated on the mill beaker.

1 Put the ingredients in the mill beaker (Fig. 10).
Note: See the mill table at the end of this user manual for the recommended quantities and processing
times.
2 Screw the mill blade unit clockwise onto the mill beaker (Fig. 11).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (Fig. 12).

1 Switch on the appliance.
We advise you to use the pulse setting or speed setting 5.
Never let the mill run for more than 30 seconds without interruption.
2 When you have nished processing, set the control knob to 0.
3 To remove the mill from the motor unit, turn the mill anticlockwise.
 11
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips hr 2071 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips hr 2071 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info