6
What to use the mill for?
The mill is suitable for grinding e.g.:
- pepper corns (25-75 g)
- sesame seed (25-75 g)
- rice, wheat (25-75 g)
- soya beans (25-75 g)
- dried peas (25-75 g)
- coconut flesh (25-50 g)
- hard (e.g. Parmesan)
cheese (25-50 g)
- bread crumbs (one dried slice of
bread)
- sugar cubes (50 g)
- nuts (shelled) (25-75 g)
- coffee beans (25-75 g)
The optimum quantities for processing are shown
between brackets.
Filter (only types HR 1704 and HR 1707)
With this filter you will make delicious fresh fruit
juices, cocktails or soy milk in next to no time. All
pips and skins will remain behind in the filter.
Preparing the filter for use
- Assemble the blender jar.
- Put the filter in the assembled blender jar
(fig. 13). Make sure that the grooves of the filter
fit exactly onto the ribs inside the blender jar.
- Put the ingredients in the filter (fig. 14).
- Add water or another liquid (e.g. for cocktails).
- Place the lid in the sieve position (fig. 5a).
- Switch the appliance on. Let the appliance run
for approx. 40 seconds.
- Switch the appliance off and remove the
blender jar.
- Pour out the drink through the spout of the
blender jar (fig. 15).
- For optimal results, put the jar with the
remaining ingredients back onto the appliance
and let it run for a few more seconds.
- Pour out the rest of the drink.
Tips
Particularly when you are processing large
quantities, we advise you not to put all the
ingredients in the filter at the same time. Start
processing a small quantity, let the appliance run
for a moment, switch it off and then add another
small quantity. Always place the lid! Repeat this
procedure until you have processed all the
ingredients.
For soy milk
- Max. 50 g of dry soy beans can be processed
with 500 ml water per batch at a time.
- Soak soy beans for 4 hours before processing
them.
For fruit juices and cocktails
- For the best results, add approximately 300 ml
water (or other liquid for cocktails, etc.) to
150 g fruit.
Cleaning
• Cleaning of the appliance, its parts and the
accessories is easiest immediately after use.
• Never clean the appliance, the accessories or
the parts in the dishwasher.
• The motor unit can be cleaned with a moist
cloth. Do not use abrasives, scourers, alcohol
etc.
Blender
- Assemble the blender jar and pour lukewarm
water and some washing-up liquid into the
blender jar.
- Place the lid.
- Let the appliance run for a few moments.
- Unplug the appliance.
- Remove the blender jar and rinse it with clean
water.
• Be careful with the sharp edges of the blade
unit!
Mill (only types HR 1701 and HR 1707)
- Unplug the appliance
- Detach the mill from the motor unit
- Clean the beaker and the blade unit under a
running tap with lukewarm water and some
washing-up liquid.
Be careful with the sharp edges of the blade
unit!
- After washing up the parts, rinse them with
clean water and dry them thoroughly.
Filter (only types HR 1704 and HR 1707)
- Take the filter out of the blender jar.
- Hold the filter over a waste bin and gently
shake out the contents of the filter.
- Rinse the filter under the tap.
