Handleiding Philips hp6609 satinelle soft total body epilator (pagina 3 van 7) (Engels, Italiaans, Turks)

429009

Verklein

Vergroot

Pagina terug

1/7

Pagina verder

1 Push the epilating head in the direction of the

arrows on the back of the appliance (1) and remove

it from the appliance (2) (Fig. 12).

2 Put the trimming head on the appliance (1) and

push it against the direction of the arrows on the

back of the appliance (2) to x it (Fig. 13).

3 Put the comb on the trimming head.

4 Switch on the appliance (Fig. 14).

Note: Speed II does not work when the trimming head is

attached.

5 Stretch the skin with your free hand.

6 Move the appliance against the direction of hair

growth. Make sure the surface of the comb always

stays in contact with the skin (Fig. 15).

7 When you have nished trimming, switch off the

appliance and remove the comb.

Styling with the trimming head.

To style your bikini line, use the trimming head without

the comb. Styling without the comb results in a hair

length of approx. 0.5-1mm. You can be as creative as you

like when you style your bikini line. You can even draw

and cut out a template, e.g. a heart shape, which you can

use to create a personal style.

Note: The trimming head can only be used at speed setting I.

1 Push the epilating head in the direction of the

arrows on the back of the appliance (1) and remove

it from the appliance (2) (Fig. 12).

2 Put the trimming head on the appliance (1) and

push it against the direction of the arrows on the

back of the appliance (2) to x it (Fig. 13).

Note: We advise you not to put the comb on the trimming

head.

3 Switch on the appliance (Fig. 14).

Note: Speed II does not work when the trimming head is

attached.

4 Move the appliance towards the desired contour

of your bikini line, against the direction of hair

growth. Touch the skin lightly with the trimming

head (Fig. 16).

Cleaning and maintenance

Note: Make sure the appliance is switched off and

unplugged before you start to clean it.

Never use scouring pads, abrasive cleaning agents or

aggressive liquids such as petrol or acetone to clean the

appliance.

Never rinse the appliance or the adapter under the

tap (Fig. 17).

Keep the appliance and the adapter dry (Fig. 18).

Cleaning the attachments

1 Remove any attachment (sensitive area cap,

opti-start cap with massage element, hair-lifting

attachment with massage element) from the

epilating head (Fig. 19).

Remove the trimming comb by pulling it off the

trimming head (Fig. 20).

2 Remove loose hairs from the attachment with the

cleaning brush.

3 Rinse the attachment under the tap while turning it.

4 Dry the attachment before you use or store it.

Cleaning the epilating head/trimming head

1 Push the epilating head/trimming head in the

direction of the arrows on the back of the

appliance (1) and remove it (2) (Fig. 12).

2 Remove loose hairs with the cleaning

brush (Fig. 21).

3 Rinse the epilating head/trimming head under the

tap for 5-10 seconds while turning it (Fig. 22).

Pull the front cover off the trimming head to remove

any hair that has accumulated inside the trimming

head (Fig. 23).

4 Shake the epilating head/trimming

head rmly (Fig. 24).

Dry the epilating/trimming head thoroughly with a tea

towel.

Note: Make sure the epilating head/trimming head is

completely dry before you place it back onto the appliance.

Replacement

All parts of the appliance can be replaced. If you need to

replace one or more of the following parts, go to your

Philips dealer or an authorised Philips service centre:

appliance itself

epilating head

sensitive area cap

opti-start cap with massage element

hair-lifting attachment with massage element

trimming head

comb

cleaning brush

adapter

Environment

Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 25).

Guarantee & service

If you need service or information or if you have a

problem, please visit the Philips website at www.philips.

com or contact the Philips Consumer Care Centre

in your country (you nd its phone number in the

worldwide guarantee leaet). If there is no Consumer

Care Centre in your country, go to your local Philips

dealer.

Troubleshooting

This chapter summarises the most common problems

you could encounter with the appliance. If you are unable

to solve the problem with the information below, contact

the Consumer Care Centre in your country.

Problem Cause Solution

Poor epilating results. You move the

appliance in the wrong

direction.

Move the appliance against the direction of hair growth, with

the on/off slide pointing in the direction in which you move the

appliance.

You place the epilating

head on the skin at the

wrong angle.

Make sure that you place the appliance on the skin at an angle

of 90° (see chapter ‘Using the appliance’).

You used a (depilatory)

cream prior to epilation.

Make sure your skin is clean, entirely dry and free from grease.

Do not use any cream before you start epilating.

The hairs are too short. Sometimes hairs are too short to be caught. The optimal length

for easy removal of the hairs is 3-4mm. The hairs that are not

caught during this session will be long enough to be removed

when you epilate the next time. You can also try to catch the

hairs by moving the appliance across the skin a few more times.

The sensitive area cap

is on the epilating head

when you epilate your

legs.

Do not use the sensitive area cap when you epilate your legs,

as the cap reduces the number of active epilating discs. NB:

Never use the epilator without the sensitive area cap when

you epilate your underarms or bikini line.

The appliance does

not work.

The socket to which the

appliance is connected is

not live.

Make sure the socket is live. If you have connected the epilator

to the socket in a bathroom cabinet, you may need to switch

on the bathroom light to activate the socket.

I cannot select speed

setting II.

The trimming head is

attached. The trimming

head can only be used at

speed setting I.

Select speed setting I when you use the trimming head.

I cannot remove the

trimming head/

epilating head from

the appliance.

You try to pull it straight

off.

Push the epilating head/trimming head in the direction of the

arrows on the back of the appliance before you pull it off the

appliance (see chapter ‘Cleaning and maintenance’).

4203.000.4330.1

3/7

Philips hp6609 satinelle soft total body epilator Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info