Handleiding Philips gc 4641 (pagina 42 van 48) (Nederlands, Duits, Engels, Frans, Italiaans)

323572

Verklein

Vergroot

Pagina terug

1/48

Pagina verder

GC4600 SERIES

A B C D E G/HF I

M L

J K



 6

 13

 21

 29

 37



Congratulations on your purchase and welcome to Philips! To fully benet from the support that

Philips offers, register your product at www.philips.com/welcome.



 Spray nozzle

 Cap of lling opening

 Steam boost

 Spray button

 Steam control

 Ionic DeepSteam trigger (specic types only)

 Amber temperature light

 Auto-off light (specic types only)/Ionic DeepSteam light (specic types only)

 Temperature dial

 Water tank (specic types only: with light and auto-off indication)

 Mains cord

 Type plate

 Soleplate

- Not shown: Filling cup

- Not shown: Heat-resistant protective cover (GC4640 only)

- Not shown: Delicate fabric protector (GC4625 only)



Read this user manual carefully before you use the appliance and save it for future reference.



- Never immerse the iron in water.



- Check if the voltage indicated on the type plate corresponds to the local mains voltage before

you connect the appliance.

- Do not use the appliance if the plug, the mains cord or the appliance itself shows visible damage,

or if the appliance has been dropped or leaks.

- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by

Philips or similarly qualied persons in order to avoid a hazard.

- Never leave the appliance unattended when it is connected to the mains.

- This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their

safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Do not let the mains cord come into contact with the hot soleplate of the iron.



- Only connect the appliance to an earthed wall socket.

- Check the mains cord regularly for possible damage.

- The soleplate of the iron can become extremely hot and may cause burns if touched.

- When you have nished ironing, when you clean the appliance, when you ll or empty the

water tank and also when you leave the iron even for a short while: set the steam control to

position 0, put the iron on its heel and remove the mains plug from the wall socket.

- Always place and use the iron on a stable, level and horizontal surface.

- Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the

water tank.



- This appliance is intended for household use only.



This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientic evidence available today.



Note: Remove the cardboard cover from the soleplate before you use the iron for the rst time.





You can use normal tap water to ll the water tank.

Tip: If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled

water or to use distilled water only.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0 (= no steam) (Fig. 2).

3 Open the cap of the lling opening (Fig. 3).

4 Tilt the iron backwards and ll the water tank with tap water up to the maximum level

with the lling cup (Fig. 4).

Do not ll the water tank beyond the MAX indication.

Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water

tank.

5 Close the cap of the lling opening (‘click’) (Fig. 5).





Fabric type Temperature

setting

Steam setting Steam boost Ionic DeepSteam

(specic types

only)

Linen Max.

; \

yes

Cotton 3

; \

yes

Wool 2

N.A. yes

Silk 1 0 N.A. N.A.

Synthetic fabrics (e.g.

acrylic, nylon,

polyamide, polyester)

1 0 N.A. N.A.

1 Specic types only: remove the heat-resistant protective cover (Fig. 6).

Do not leave the heat-resistant protective cover on the soleplate during ironing.

2 Put the iron on its heel.

 7

3 To set the required ironing temperature, turn the temperature dial to the appropriate

position (see ‘Temperature and steam settings’ table) (Fig. 7).

Check the laundry care label for the fabric type.

If you do not know what kind or kinds of fabric an article is made of, determine the right ironing

temperature by ironing a part that is not visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. To

prevent stains, do not use the spray function.

Start ironing the articles that require the lowest ironing temperature, such as those made of

synthetic bres.

4 Set the appropriate steam setting (see ‘Temperature and steam settings’ table) (Fig. 8).

Note: Make sure that the steam setting you select is suitable for the set ironing temperature.

5 Put the mains plug in an earthed wall socket.

, The amber temperature light goes on (Fig. 9).

6 When the amber temperature light has gone out, wait a while before you start ironing.

The temperature light goes on from time to time during ironing.





1 Set the steam control to position 0 (= no steam).

2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’).



Note: The iron may give off some smoke when you use it for the rst time. This ceases after a short while.

1 Make sure that there is enough water in the water tank.

2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’) (Fig. 7).

3 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’) (Fig. 8).

Note: The iron starts to produce steam as soon as it reaches the set temperature.



When you use the Ionic DeepSteam function during steam ironing, the steam produced is ner than

during regular steam ironing. Fine steam reaches deeper, especially into thick fabrics. This helps you

to remove stubborn creases easily.

1 Make sure that there is enough water in the water tank.

2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’) (Fig. 7).

3 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’). (Fig. 8)

4 Press and hold the Ionic DeepSteam trigger (Fig. 10).

, The blue Ionic DeepSteam light goes on and you hear a humming sound (Fig. 11).

5 The iron now produces Ionic DeepSteam to help you remove even the toughest

creases (Fig. 12).

8

Note: The Ionic DeepSteam function is only effective when it is used in combination with a steam setting

and a temperature setting between 2 and MAX.

Note: Do not use the Ionic DeepSteam function when you iron without steam and/or at low temperature

settings. However, ironing at low temperatures without steam with the Ionic DeepSteam function

switched on will not damage the iron.

Note: The Ionic DeepSteam output may vary from time to time, depending on the ironing temperature.





You can use the spray function to moisten the article to be ironed. This helps remove stubborn

creases.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be ironed (Fig. 13).



A steam boost from the special Steam Tip soleplate helps remove stubborn creases. The steam

boost enhances the distribution of steam into every part of the article to be ironed.

The steam boost function can only be used at temperature settings between 3 and MAX.

1 Make sure that there is enough water in the water tank.

2 Press and release the steam boost button (Fig. 14).

- You can also use the steam boost function when you hold the iron in vertical position. This is

useful for removing creases from hanging clothes, curtains etc. (Fig. 15)



This iron is equipped with a drip-stop function: the iron automatically stops producing steam when

the temperature is too low, to prevent water from dripping out of the soleplate. When this happens,

you may hear a sound.



The automatic shut-off function automatically switches off the iron if it has not been moved for a

while.

- Specic types only: The tank light ashes to indicate that the iron has been switched off by the

automatic shut-off function (Fig. 16).

- Sspecic types only: The red auto-off light ashes to indicate that the iron has been switched off

by the automatic shut-off function.

- To let the iron heat up again, pick up the iron or move it slightly. The tank light (specic types

only) or auto-off light (specic types only)stops ashing.



The delicate fabric protector protects delicate fabrics from heat, damage and shiny patches.

With the delicate fabric protector you can iron delicate fabrics (silk, wool and nylon) at temperature

settings 3 to MAX in combination with all steam functions available on the iron.

The delicate fabric protector reduces the soleplate temperature instantly, thus allowing you to iron

delicate fabrics safely.

If you do not know what kind or kinds of fabric an article is made of, determine the right ironing

temperature by ironing a part that is not visible when you wear or use the article.

1 Put the iron on the delicate fabric protector (‘click’) (Fig. 17).

 9



Remove the mains plug from the wall socket, set the steam control to position 0 and let the iron

cool down before you clean it.

Do not put vinegar or other descaling agents in the water tank.



1 Wipe akes and any other deposits off the soleplate with a damp cloth and a non-abrasive

(liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad,

vinegar or other chemicals to clean the soleplate.

2 Clean the upper part of the iron with a damp cloth.

3 Regularly rinse the water tank with water. Empty the water tank after you have rinsed it.



The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank combined with

the Calc-Clean function.

1 The Anti-Calc tablet prevents scale from clogging the steam vents. This tablet is constantly active

and does not need to be replaced.

2 The Calc-Clean function removes the scale particles from the iron.



Use the Calc-Clean function once every two weeks. If the water in your area is very hard (i.e. when

akes come out of the soleplate during ironing), use the Calc-Clean function more frequently.

1 Fill the water tank to the maximum level.

Do not put vinegar or other descaling agents in the water tank.

2 Set the temperature dial to MAX (Fig. 18).

3 Put the plug in an earthed wall socket.

4 Unplug the iron when the temperature light goes out.

5 Hold the iron over the sink. Push the steam control to the Calc-Clean position and hold it.

Gently shake the iron to and fro (Fig. 19).

, Steam and boiling water come out of the soleplate. Impurities and akes (if any) are ushed

out.

6 Release the steam control as soon as all the water in the tank has been used up.

Repeat the Calc-Clean process if the iron still contains a lot of impurities.



1 Put the plug in the wall socket and let the iron heat up to let the soleplate dry.

2 Unplug the iron when it has reached the set ironing temperature.

3 Move the hot iron gently over a piece of used cloth to remove any water stains that may

have formed on the soleplate.

4 Let the iron cool down before you store it.



1 Set the steam control to position 0, unplug the iron and let it cool down.

2 Empty the water tank and store the iron on its heel on a stable surface. (Fig. 20)

10

3 Steek de stekker in een geaard stopcontact.

4 Haal de stekker uit het stopcontact nadat het temperatuurlampje is uitgegaan.

5 Houd het strijkijzer boven de gootsteen en schuif de stoomregelaar naar de Calc-Clean-

stand en houd deze vast. Schud het strijkijzer voorzichtig heen en weer (g. 19).

, Er komt stoom en kokend water uit de zoolplaat. Schilfertjes en verontreinigingen, voor

zover aanwezig, worden uit het strijkijzer weggespoeld.

6 Laat de stoomregelaar los zodra al het water in het reservoir is opgebruikt.

Gebruik de Calc-Clean-functie nogmaals als het strijkijzer nog steeds veel verontreinigingen bevat.



1 Steek de stekker in het stopcontact en laat het strijkijzer opwarmen om de zoolplaat te laten

drogen.

2 Haal de stekker uit het stopcontact zodra het strijkijzer de ingestelde temperatuur bereikt

heeft.

3 Beweeg het hete strijkijzer voorzichtig over een schone oude lap om eventuele watervlekken

van de zoolplaat te verwijderen.

4 Laat het strijkijzer afkoelen voordat u het opbergt.



1 Zet de stoomregelaar op stand 0, haal de stekker uit het stopcontact en laat het strijkijzer

afkoelen.

2 Leeg het waterreservoir en berg het strijkijzer op door het op zijn achterkant op een stevige

ondergrond te plaatsen. (g. 20)

3 Rol het netsnoer op en maak het vast met het snoerbindertje.



U kunt het strijkijzer na het strijken onmiddellijk op de hittebestendige beschermhoes plaatsen. U

hoeft het strijkijzer niet eerst te laten afkoelen.

Gebruik de hittebestendige beschermhoes niet tijdens het strijken.

1 Plaats de punt van de zoolplaat in de hittebestendige beschermhoes (1) en druk vervolgens

de achterkant van het strijkijzer omlaag (2) (g. 21).



- Gooi het apparaat aan het einde van zijn levensduur niet weg met het normale huisvuil, maar

lever het in op een door de overheid aangewezen inzamelpunt om het te laten recyclen. Op die

manier levert u een bijdrage aan een schonere leefomgeving (g. 22).



Als u service of informatie nodig hebt of als u een probleem hebt, bezoek dan de Philips-website

(www.philips.nl) of neem contact op met het Philips Consumer Care Centre in uw land (u vindt het

telefoonnummer in het ‘worldwide guarantee’-vouwblad). Als er geen Consumer Care Centre in uw

land is, ga dan naar uw Philips-dealer.

42

Philips gc 4641 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info