B
You can clean the outer filter and the inner filter with a brush or with a
normal vacuum cleaner if they are very dirty.
B
If necessary, you can clean the outer filter and the inner filter in cold or
lukewarm water.
5 Place the outer filter back onto the filter holder and put the filter
holder back into the dust compartment. Make sure you insert the
filter holder in the correct way (fig. 12).
Never use the vacuum cleaner if the filter unit is still wet.
Storage
1 You can store the brush tool and the crevice tool by placing them
on the charging unit (fig. 13).
Replacement
◗ Replace the inner filter if it can no longer be cleaned properly
(usually after having been cleaned about 50 times).
1 Remove the filter unit from the dust compartment (fig. 11).
2 Remove the outer filter from the holder by turning it
anticlockwise (fig. 14).
3 Remove the inner filter from the holder by gently turning it
anticlockwise (fig. 15).
4 Attach a new inner filter to the holder (fig. 16).
5 Push the tip of the inner filter inwards (fig. 17).
6 Reattach the outer filter to the holder (fig. 18).
Accessories
New inner filters are available under type no. FC8035. Contact your
Philips dealer.
ENGLISH 9
