Copy a device mode
In case you have two TV’s, you can change any of the other device modes of
the SRU 7060 into a second TV mode for controlling that second TV.
Example:You have two TVs, but no satellite or cable box.
1 Select the target mode STB with
the SELECT key.
2 Press keys 1 and 6 simultaneously for
5 seconds until the label of the selected mode
blinks twice and remains lit.
3 Press keys 9, 9 and 2, in that order.
4 Select the source mode (TV) you want to
copy.
5 Press key 1.
– The STB mode label will blink twice to
confirm.You can now program the STB mode
for operating a second TV. Please read chapter
2 ‘Installing the remote’ how to do this.
– Any satellite device, learned keys or macros
stored in the STB mode will be deleted.
• If the mode light blinks once for a longer time, the copying failed.
Try again from step 1.
Reset all functions in a device mode
To reset a copied device mode to the original mode or to delete all learned
keys or macros stored in a mode, you can reset this mode to the default
factory settings.
1 Select the mode to be reset with the SELECT key.
2 Press keys 1 and 6 simultaneously for
5 seconds until the label of the selected mode
blinks twice and remains lit.
3 Press keys 9, 9 and 6, in that order.
10
Instructions for use
English
