37870
12
Verklein
Vergroot
Pagina terug
1/174
Pagina verder
4.3 SLEEP-TIMER
Some televisions and satellite boxes have a sleep-timer function built-in. This
enables these devices to be programmed for switching off at a pre-set time. You
can check whether your equipment (TV, VCR etc.) has a built-in sleep-timer by
aiming the SBC RU880 at it and pressing and holding the Shift key and B key.
If there’s a sleep-timer function built in, the equipment will respond. If the
selected equipment does not have a sleep-timer function built in, the SBC
RU880's internal sleep-timer can be activated. Here's how:
1 Press and hold the SMART key (for about three seconds) until the LCD
displays TIMER. Release the SMART key.
2 Press Cursor up or Cursor down until the LCD displays SPECIAL.
3 Press OK.
The LCD displays THEATRE.
4 Press Cursor up or Cursor down until the LCD displays SLEEP.
5 Press OK.
The LCD displays DISABLE.
6 Press Cursor up or Cursor down to switch between DISABLE and
ENABLE.
If you select ENABLE the internal sleep-timer is set.
7 Press OK.
The RU880 returns to normal mode.
4.3.1 Activating the SBC RU880’s sleep-timer
The SBC RU880’s sleep-timer function can be used to switch off equipment after
a pre-determined time. First, select the equipment you want switched off, point
your SBC RU880 at it, then:
1 Press and hold the SBC RU880’s Shift key and then press the B key. Release
both keys.
The LCD displays SLEEP 15 by default.
2 Press Cursor up or Cursor down to choose between the sleep-timer in 15,
30, 45, 60 minute sequences or OFF.
3 If you want the SBC RU880 to turn off your equipment after 15 minutes,
press Cursor up until the LCD displays SLEEP 15.
4 Press OK to confirm your selection.
The LCD displays SLEEP 15 and commences count-down.
After 15 minutes the SBC RU880 turns off the selected equipment and
returns to normal operation.
NOTE: Always point the SBC RU880 directly at your equipment to ensure a
response to your key command.
4.3.2 To erase the sleep-timer
1 Select the equipment that you want to be turned off.
2 Press and hold the SBC RU880’s Shift key and B key until the LCD displays
SLEEP 15.
3 Press Cursor up until the LCD displays SLEEP OFF.
4 Press OK.
The sleep-timer function is erased and your equipment stays on.
4.3.3 Turning off both your equipment and sleep-timer
1 Select the equipment that you set to be turned off.
2 Press the B key on the SBC RU880.
The equipment turns off and the SBC RU880 erases the sleep-timer function.
4.4 PREPARING THE SBC RU880 FOR HOME THEATRE CONTROL
NOTE: You should only programme the SBC RU880’s THEATRE key after you have
programmed all the rest of your devices.
Home Theatre is an integrated A/V system that offers the best in sound and
vision entertainment. If you have a Home Theatre system, you can use the SBC
RU880 to operate the most important functions of each device (TV, VCR,
amplifier etc.) without changing devices all the time.
The SBC RU880 is already factory preset to operate TVs, VCRs and amplifiers
under THEATRE. All you have to do is programme the THEATRE key. Just:
1 Press and hold the SMART key (for about three seconds) until the LCD
displays TIMER. Release the SMART key.
2 Press Cursor up or Cursor down until the LCD displays SPECIAL.
3 Press OK.
The LCD displays THEATRE.
English
12
12

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Philips-SBC-RU-880

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips SBC RU 880 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips SBC RU 880 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info