34
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or
service center.
For further help, please also check out the RUSH FAQ list at
hhtp://www.audio.philips.com/rush
WARNING: Do not open the set as there is a risk of electric shock! Under no
circumstances should you try to repair the set yourself, as this will
invalidate the warranty.
My RUSH has no power, or nothing is shown in the display.
What's wrong?
– Battery weak/ incorrectly inserted.
• Correctly insert fresh battery.
– Joy pad pressed too quickly.
• Press and hold 2; OK until display turns on.
– Headphones not properly connected.
• Insert headphone plug into jack completely.
– Corrupted file/ track.
• Clear all tracks from the device memory. Click from your PC task bar:
Start y Programs y Philips RUSH Audio player y Format.
– If there is still no response from the above tips, the Flash memory may have been
corrupted.
• Please check out the following steps to recover your player.
1 Restart your computer.
2 Remove the battery from the battery compartment of RUSH.
3 Connect RUSH to your PC.
4 Press and hold the 2; key while inserting a fresh battery into RUSH.
5 Continue holding 2; for another 5 seconds.
6 RUSH enters recovery mode. On your PC task tray, click Start y Programs
y Start Philips RUSH Audio Playery Recovery.
7 A Recovery screen will pop up. Uncheck the Quick download box. Click Start
to recover the player.
• The recovery application is now correcting your player. Please take care not
to interrupt or unplug RUSH from computer when the recovering is in
progress.
