472874
4
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
HTS5533
HTS5543
HTS5553
Register your product and get support at
www.philips.com/welcome
1
English
EN
Contents
1 Important 2
Safety 2
Care for your product 3
Care of the environment 3
Help and support 3
2 Your home theater 4
Main unit 4
Connectors 4
Remote control 5
3 Connect and set up 7
Connect speakers 7
Connect to TV 8
Connect audio from TV and other devices 9
Set up speakers 10
Set up EasyLink (HDMI-CEC control) 10
4 Use your home theater 12
Discs 12
Data les 13
USB storage devices 14
Audio, video, and picture options 14
Radio 15
MP3 player 15
Create MP3 les 16
Choose sound 16
5 Change settings 18
Language settings 18
Picture and video settings 18
Audio settings 18
Parental control settings 19
Display settings 19
Energy saving settings 19
Restore default settings 19
6 Update software 20
Check software version 20
Update software through USB 20
7 Product speci cations 21
8 Troubleshooting 23
9 Notice 25
Copyright 25
Mains fuse (UK only) 25
Compliance 25
Trademarks 25
10 Index 27
2 EN
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or re!
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer Care
to have the product checked before use.
Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the home theater!
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident,
injury or damage.
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on at, level surfaces that can support the
combined weight of the speaker and stand.
Never place the product or any objects
on power cords or on other electrical
equipment.
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Do not touch the disc optical lens inside
the disc compartment.
Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
Never install this product in a con ned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
Do not mix batteries (old and new or
carbon and alkaine, etc.).
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
3
English
EN
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Care for your product
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Use only micro ber cloth to clean the
product.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
Help and support
Philips provides extensive online support. Visit
our website at www.philips.com/support to:
download the complete user manual
print the quick start guide
watch video tutorials (available only for
selected models)
nd answers to frequently answered
questions (FAQs)
email us a question
chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
serial number of your product. You can nd this
information on the back or bottom of your
product.
4 EN
2 Your home
theater
Congratulations on your purchase, and
welcome to Philips! To fully bene t from the
support that Philips offers, register your product
at www.philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
a ( Standby-On )
Switch the home theater on or to standby.
b
( Play/Pause )
Start, pause or resume play.
c
( Stop )
Stop play.
In radio mode, press and hold to erase
the current preset radio stations.
d SOURCE
Select an audio or video source for the
home theater.
e
+/-
Increase or decrease volume.
f
( Open/Close )
Open or close the disc compartment, or
eject the disc.
g Display panel
h Disc compartment
Connectors
This section includes an overview of the
connectors available on your home theater.
Front connectors
a MUSIC iLINK
Audio input from an MP3 player.
b
( USB )
Audio, video or picture input from a USB
storage device.
Rear connectors
a AC MAINS
Connect to the power supply.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c Wireless Rear Audio
Connect to a Philips wireless module.
(Model: Philips RWSS5512, sold separately)
d HDMI OUT (ARC)
Connect to the HDMI input on the TV.
e VIDEO OUT - VIDEO
Connect to the composite video input on
the TV.
5
English
EN
f ANTENNA FM 75
Signal input from an antenna, cable or
satellite.
g AUDIO IN - AUX 1 / AUX 2
Connect to an analog audio output on the
TV or an analog device.
h DIGITAL IN - OPTICAL
Connect to an optical audio output on the
TV or a digital device.
i DIGITAL IN - COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
Remote control
This section includes an overview of the
remote control.
1
2
3
4
5
6
7
8
20
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
6 EN
a ( Standby-On )
Switch the home theater on or to
standby.
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b
( Open/Close )
Open or close the disc compartment, or
eject the disc.
c Source buttons
DISC : Switch to disc source. Access or
exit the disc menu when you play a disc.
AUDIO SOURCE : Select an audio
input source.
RADIO : Switch to FM radio.
USB : Switch to USB storage device.
d Navigation buttons
Navigate menus.
In video mode, press left or right to fast
backward or fast forward; press up or
down to slow backward or slow forward.
In radio mode, press left or right to
search a radio station; press up or
down to ne tune a radio frequency.
e OK
Con rm an entry or selection.
f
BACK
Return to a previous menu screen.
g
/ ( Previous/Next )
Skip to the previous or next track,
chapter or le.
In radio mode, select a preset radio
station.
h
( Mute )
Mute or restore volume.
i VOL +/-
Increase or decrease volume.
j SOUND
Select a sound mode.
k Numeric buttons
Select an item to play.
l ANGLE
Select video scenes recorded in different
camera angels.
m REPEAT / PROGRAM
Select or turn off repeat mode.
In radio mode, press once to access
program mode, and press again to
store the radio station.
In radio mode, press and hold for three
seconds to reinstall the radio stations.
n REPEAT A-B
Mark two points within a chapter or track
to repeat play, or turn off the repeat mode.
o CREATE MP3 / ZOOM
Access the create MP3 menu.
Zoom into a video scene or picture.
Press the Navigation buttons (left/
right) to select a zoom factor.
p
SCREEN FIT
Fit the picture format to the TV screen.
q SUBTITLE
Select subtitle language for video.
r AUDIO SYNC
Select an audio language or channel.
Press and hold to access audio delay
setting, and then press the +/- or
Navigation buttons to delay the audio
to match the video.
s SURR
Select surround sound or stereo sound.
t
( Stop )
Stop play.
In radio mode, press and hold to erase
the current preset radio stations.
u
( Play/Pause )
Start, pause or resume play.
v
INFO
Access more play options while playing a
disc or a USB storage device.
w
SETUP
Access or exit the setup menu.
x SLEEP
Switch the home theater to standby mode
after the elapsed time.
7
English
EN
3 Connect and set
up
This section helps you connect your home
theater to a TV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see
the quick start guide. For a comprehensive
interactive guide, visit www.connectivityguide.
philips.com.
Note
For identi cation and supply ratings, see the type plate
at the back or bottom of the product.
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting
up a surround sound effect. For best effect,
position all the speakers towards the seating
position and place them close to your ear level
(seated).
Note
Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
re ective surfaces, and speaker acoustics. Experiment
with the speaker positions to nd the optimum setting
for you.
Follow these general guidelines for speakers
placement.
1 Seating position:
This is the center of your listening area.
2 FRONT CENTER (front center) speaker:
Place the center speaker directly in front of
the seating position, either above or below
your TV.
3 FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the
front, and at equal distance from the center
speaker. Make sure that the left, right, and
the center speakers are at equal distance
from your seating position.
4 REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
9
English
EN
2 Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 9 ) .
3 On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
If you cannot hear the TV audio
through your home theater, set up the
audio manually (see 'Set up the audio'
on page 11 ) .
Note
If your TV has a DVI connector, you can use an HDMI/
DVI adapter to connect to TV. However, some of the
features may not be available.
Option 3: Connect to the TV through
composite video
Basic quality video
If your TV does not have HDMI connectors, use
a composite video connection. A composite
connection does not support high-de nition
video.
1 Using a composite video cable, connect the
VIDEO connector on your home theater
to the VIDEO IN connector on the TV.
The composite video connector might
be labeled AV IN , COMPOSITE , or
BASEBAND .
2 Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 9 ) .
TV
3 When you watch TV programs, press
SOURCE on your home theater
repeatedly to select the correct audio
input.
4 When you watch videos, switch your TV to
the correct video input. For details, see the
TV user manual.
Connect audio from TV and
other devices
Play audio from TV or other devices through
your home theater speakers.
Use the best quality connection available on
your TV, home theater, and other devices.
Note
The audio connections in this user manual are only
recommendations. You can use other connections too.
When your home theater and TV are connected
through HDMI ARC , an audio connection is not
required.
Option 1: Connect audio through a
digital optical cable
Best quality audio
1 Using an optical cable, connect the
OPTICAL connector on your home
theater to the OPTICAL OUT connector
on the TV or other device.
The digital optical connector might be
labeled SPDIF or SPDIF OUT .
TV
10 EN
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1 Using a coaxial cable, connect the
COAXIAL connector on your home
theater to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
The digital coaxial connector might be
labeled DIGITAL AUDIO OUT .
Option 3: Connect audio through
analog audio cables
Basic quality audio
1 Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on the TV or
other device.
TV
VCR
Set up speakers
Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.
1 Press SETUP on your home theater
remote control.
2 Select [Audio Setup] and then press OK .
3 Press the Navigation buttons and OK to
select and change:
[Speakers Volume] : Set the volume
level of each speaker.
[Speakers Delay] : Set the delay time
for speakers which are placed closer to
the seating position in order to obtain
equal audio transmission from all the
speakers.
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI can be controlled by a single remote
control.
Note
Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
11
English
EN
Before you start
Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Enable EasyLink
1 Press SETUP .
2 Select [Video Setup] and then press OK .
3 Select [HDMI Setup] > [EasyLink Setup]
> [EasyLink] > [On] .
4 On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
On your TV, set the audio output to
'Ampli er' (instead of TV speakers).
For details, see the TV user manual.
EasyLink controls
With EasyLink, you can control your home
theater, TV, and other connected HDMI-CEC
compliant devices with a single remote control.
[One Touch Play] (One-touch play): When
a video disc is in the disc compartment,
press
to wake up the TV from standby,
and then play a disc.
[One Touch Standby] (One-touch
standby): If one-touch standby is enabled,
your home theater can switch to standby
with the remote control of the TV or other
HDMI-CEC devices.
[System Audio Control] (System audio
control): If system audio control is enabled,
the audio of the connected device is
output through your home theater
speakers automatically when you play the
device.
[Audio Input Mapping] (Audio input
mapping): If system audio control does not
work, map the connected device to the
correct audio input connector on your
home theater (see 'Set up the audio' on
page 11 ) .
Note
To change the EasyLink control settings, press
SETUP , select [Video Setup] > [HDMI Setup] >
[EasyLink Setup] .
Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, check that you have enabled Easylink
on all the devices (see 'Enable EasyLink' on
page 11 ) . Then, set up the EasyLink audio
control.
1 Press SETUP .
2 Select [Video Setup] and then press OK .
3 Select [HDMI Setup] > [EasyLink Setup]
> [System Audio Control] > [On] .
To play the audio from the TV
speakers, select [Off] , and then skip the
following steps.
4 Select [EasyLink Setup] > [Audio Input
Mapping] .
5 Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.
12 EN
4 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
Make the necessary connections described
in the quick start guide and the user manual.
Switch the TV to the correct source for
your home theater (for example, HDMI,
AV IN).
Discs
Your home theater can play DVDs, VCDs, and
CDs. It can also play discs that you’ve made at
home, such as CD-R discs of photos and music.
1 Insert a disc into the home theater.
2 If the disc does not play automatically, press
DISC .
3 Use the remote control to control play.
Play buttons
Button Action
Navigation
buttons
Navigate menus.
Up/Down:
Video: Slow forward or slow
backward (VCD/SVCD can
only slow forward).
Picture: Rotate the picture
clockwise or counter-clockwise.
Left/Right:
Video: Fast backward or fast
forward. Press repeatedly to
change the search speed.
Picture: Flip the picture verti-
cally or horizontally.
OK Con rm an entry or selection.
( Play/
Pause )
Start, pause or resume play.
Stop play.
/ Skip to the previous or next
track, chapter or le.
SUBTITLE Select subtitle language for
video.
DISC Access or exit the disc menu.
AUDIO
SYNC
Select an audio language or
channel.
SCREEN
FIT
Fit the picture format to the TV
screen.
ZOOM Zoom into a video scene or
picture.
REPEAT Select or turn off repeat mode.
REPEAT
A-B
Mark two points within a
chapter or track to repeat play,
or turn off the repeat mode.
ANGLE Select video scenes recorded in
different camera angels.
INFO Access the advanced options
when you play your audio, video,
or media les (see 'Audio, video,
and picture options' on page
14 ) .
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1 While playing video, press and hold
AUDIO SYNC .
» Audio sync menu is displayed.
2 Press the +/- or Navigation buttons to
synchronize the audio with the video, and
then press OK .
Note
Picture and sound can be synchronized through the
setup menu of your home theater, press
SETUP ,
select [Audio Setup] > [Audio Sync] .
19
English
EN
Parental control settings
Password and Ratings
1 Press SETUP .
2 Select [Preference Setup] and then press
OK .
[Password] : Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000 .
[Parental] : Enable maturity-based
restricted access for playback of DVD-
video that are recorded with ratings.
To play discs irrespective of the rating,
select [8 Adult] .
Lock disc
1 Press SETUP .
2 Select [General Setup] and then press OK .
[Disc Lock] : Lock the disc to restrict
play. You can lock up to 20 discs on
your home theater.
Note
To play a locked disc, follow the onscreen instructions
to enter the password, and then press OK .
Display settings
1 Press SETUP .
2 Select [Preference Setup] and then press
OK .
[PBC] : Enable or disable the content
menu navigation of VCD and SVCD
discs with Play Back Control feature.
[MP3/JPEG Display] : Select the
content display for MP3/JPEG les.
Energy saving settings
1 Press SETUP .
2 Select [General Setup] and then press OK .
[Screen Saver] : Switch the home
theater to screen saver mode after 10
minutes of no activity.
[Auto Standby] : Switch the home
theater to standby mode after 30
minutes of no activity when in disc or
USB mode.
[Sleep Timer] : Switch the home
theater to standby mode after the
elapsed time.
[Display Dim] : Set the brightness of
the home theater front panel display.
Restore default settings
1 Press SETUP .
2 Select [Preference Setup] > [Default] , and
then press OK .
3 Select [Reset] and then press OK to
con rm.
» Your home theater is reset to its
default settings, except for parental
control setting.
20 EN
6 Update software
Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.
Compare the version of your current software
with the latest version on www.philips.com/
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
Caution
Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
Check software version
Check the version of the current software
installed on your home theater.
1 Press SETUP .
2 Select [Preference Setup] and then press
OK .
3 Select [Version Info.] and then press OK .
» The software version is displayed.
Update software through
USB
What you need
A USB ash drive that is FAT-formatted,
with at least 75MB of memory. Do not use
a USB hard drive.
A computer with Internet access.
An archive utility that supports the ZIP le
format.
Step 1: Download the latest software
1 Connect a USB ash drive to your
computer.
2 In your web browser, go to www.philips.
com/support.
3 At the Philips Support website, nd your
product and locate the Software and
drivers .
» The software update is available as a
zip le.
4 Save the zip le in the root directory of
your USB ash drive.
5 Use the archive utility to extract the
software update le in the root directory.
6 Disconnect the USB ash drive from your
computer.
Step 2: Update the software
Caution
Do not switch off the home theater or remove the
USB ash drive during the update.
1 Connect the USB ash drive containing the
downloaded le to your home theater.
Make sure that the disc compartment
is closed and there is no disc inside.
2 Switch your TV to the correct source for
your home theater.
3 Follow the onscreen instructions to
con rm the update.
» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
24 EN
Cannot play a DivX le.
Make sure that the DivX le is encoded
according to the 'Home Theater Pro le'
with the DivX encoder.
Make sure that the DivX le is complete.
DivX subtitles do not display correctly.
Make sure that the subtitle le name is
the same as the movie le name (see
'Subtitles' on page 13 ) .
Select the correct character set (see
'Subtitles' on page 13 ) .
Cannot read the contents of a USB storage
device.
Make sure that the format of the USB
storage device is compatible with the
home theater.
Make sure that the le system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
The operation is not possible.
EasyLink does not work.
Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is turned on (see
'Set up EasyLink (HDMI-CEC control)' on
page 10 ) .
When you switch on the TV, the home theater
automatically switches on.
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
25
English
EN
9 Notice
This section contains the legal and trademark
notices.
Copyright
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Copyright in the UK
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performers Protection Acts 1958 to 1972.
Mains fuse (UK only)
This information applies only to products with a
UK mains plug.
This product is tted with an approved molded
plug. If you replace the fuse, use one with:
the ratings shown on the plug,
a BS 1362 approval, and
the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.
Compliance
This product is in compliance with the essential
requirements and other relevant provisions
of Directives 2006/95/EC (Low Voltage),
2004/108/EC (EMC).
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued
& pending. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks
& DTS Digital Surround and the DTS logos
are trademarks of DTS, Inc. Product includes
software.
DTS, Inc. All Rights Reserved.
DivX , DivX Ultra , DivX Certi ed and
associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under
license.
DivX Ultra
Certi ed to play DivX video
with advanced features and premium content.
ABOUT DIVX VIDEO: DivX
is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an of cial DivX
Certi ed
device that plays DivX video. Visit
divx.com for more information and software
tools to convert your les into DivX videos.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips HTS5543 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips HTS5543 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Philips HTS5543

Philips HTS5543 Snelstart handleiding - Nederlands - 12 pagina's

Philips HTS5543 Gebruiksaanwijzing - Nederlands - 36 pagina's

Philips HTS5543 Snelstart handleiding - Deutsch - 12 pagina's

Philips HTS5543 Gebruiksaanwijzing - Deutsch - 38 pagina's

Philips HTS5543 Snelstart handleiding - English, Français - 12 pagina's

Philips HTS5543 Gebruiksaanwijzing - Français - 38 pagina's

Philips HTS5543 Snelstart handleiding - Italiano - 12 pagina's

Philips HTS5543 Gebruiksaanwijzing - Português - 34 pagina's

Philips HTS5543 Snelstart handleiding - Espanõl - 12 pagina's

Philips HTS5543 Gebruiksaanwijzing - Espanõl - 36 pagina's

Philips HTS5543 Snelstart handleiding - Dansk - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info