Before first use
1 Remove any stickers and wipe the body of the toaster with a damp cloth.
2 Before using the appliance for the first time, we advise you to let the appliance complete a
few toasting cycles without slices of bread on the highest browning setting in a properly
ventilated room.
This will burn off any dust that may have accumulated on the heating elements and will prevent
unpleasant smells when toasting bread.
Using the appliance
Never let the toaster operate unattended.
◗ You can adjust the length of the cord by winding part of it round the brackets in the base of
the appliance (fig. 2).
1 Put the appliance on a stable and flat surface, away from curtains and other combustible
materials.
2 Put the plug in the wall socket.
Toasting bread
1 Put one or two slices of bread in the toaster (fig. 3).
2 Select the 7 mode by pressing the mode button until 7 appears on the display. Depending on
the previously selected mode, you have to press the mode button once or several times
(fig. 4).
3 Select the desired browning setting (fig. 5).
Select a low setting for lightly toasted bread and a high setting for a dark browning result.
- Press the - button once or several times to select a lower setting for lighter toast.
- Press the + button once or several times to select a higher setting for darker toast.
The selected setting is shown on the display.
4 Push the toasting lever down to switch the appliance on (fig. 6).
- The stop button lights up.
- The toasting lever will only stay down if the appliance has been connected to the mains.
- The remaining toasting time appears on the display and starts blinking.
The top part of the toaster will get hot during toasting. Be careful not to touch it.
◗ Monitoring the toasting process (fig. 7).
The display shows the toasting time and starts counting down.The last minute is displayed in
seconds.
5 Adjusting the browning setting during toasting (fig. 8).
When the toaster is operating you can press the + button to get darker toast or the - button to get
lighter toast.
The toasting time and browning setting are adjusted on the display.
B
Note: when you select a lower setting for lighter toast, the toast may pop up immediately because the
desired browning level has already been reached.
When the toast is ready, you will hear an audible signal, the display blinks a few times and the bread
pops up.
ENGLISH 7
