489441
12
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
Cleaning the side brushes
After some time, uff, hairs and threads start to accumulate around the shafts of the side brushes. To
ensure proper functioning, clean the side brushes and the shafts from time to time.
1 Make sure the on/off switch is in ‘off’ position.
2 Placetherobotupsidedownonaatsurface.
3 Grab one of the side brushes by its bristles (Fig. 29).
4 Pull the side brush upwards to remove it from the shaft (Fig. 30).
5 Removeuff,hairsandthreadsfromtheshaftandfromthesidebrushwithasoftbrush(e.g.
a toothbrush) or a cloth (Fig. 31).
6 Push the side brush back onto the shaft (Fig. 32).
7 Repeat steps 2 to 5 for the other shaft and the other side brush.
Storage
1 Switch off the robot by setting the on/off switch to ‘off’ position.
2 Emptythedustcontainerandcleanthelter(seechapter‘Cleaningandmaintenance’).
3 Remove the side brushes from their shafts.
4 Store the robot in a dry place with a temperature of at least 15°C.
Note: After a long period of storage, always charge the robot before you switch it on.
Replacement
Replacing the lter
Replace the lter if it can no longer be cleaned properly.
1 Make sure the on/off switch is in ‘off’ position.
2 Remove the dust container from the robot (see steps 2 to 4 of chapter ‘Cleaning and
maintenance’, section ‘Emptying and cleaning the dust container’).
3 Carefullyliftthelidoffthedustcontainerandremovetheoldlter.Emptythedust
container (Fig. 33).
4 Placethenewlterinthedustcontainerandplacethelidonthedustcontainer(Fig.34).
5 Put back the dust container and the dust container compartment cover (see steps 10 and 11
of chapter ‘Cleaning and maintenance’, section ‘Empying and cleaning the dust container’).
Replacing the side brushes
Replace the side brushes after some time to ensure proper cleaning results.
Note: Always replace the side brushes when you notice signs of wear. We also recommend that you
replace both side brushes at the same time.
1 Make sure the on/off switch is in ‘off’ position.
2 Placetherobotupsidedownonaatsurface.
3 Grab one side brush by its bristles and pull it off the shaft (Fig. 30).
4 Push the new side brush onto the shaft (Fig. 32).
ENGLISH12
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips FC8800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips FC8800 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info