English
24
Before Operation (Continued)
VCR Play System
Your video recorder uses triple colour standards, PAL,
SECAM and MESECAM. During play your video recorder
should select the colour system automatically, however if
you experience problems you may need to do it manually.
AV2 Connection
You can connect a decoder, satellite receiver or other
device to the EURO AV2 socket on the back.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the component video jacks for connec-
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to ON.
ote
Progressive Scan will not be set when the VIDEO OUT-
PUT switch is set at RGB position.
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Factory Setting
If you need to, you can reset the recorder to all its facto-
ry settings. Select ‘SET’ icon then press OK.
ote
Some options can not be reset. (Auto Programming, Clock Set,
Set Password, Rating, Area Code, and Disc Protect)
LANGUAGE
Display Language
Select a language for the Setup menu and on-screen
display.
Disc Language
Select a language for the disc’s Menu, Audio, and Subtitle.
- Original: The original language set for the disc is
selected.
- Others: To select another language, select Others
option then press OK. Use the numbered
buttons to key-in the corresponding 4-digit
number according to the language code list
on page 57. If you make a mistake, press b
repeatedly to delete one by one and correct
it.
