26364
57
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
2. Networks 57
2. Networks
2. Networks
You can connect your multifunction machine to a PC
with a USB cable or to a PC or network via a wireless
connection.
With the USB cable, you can connect your multifunction
machine to a PC that is connected to a network. Other
PCs on this network can then access the multifunction
machine if it is shared for use on the network. You can-
not connect the machine directly to a network over the
USB cable!
With a WLAN adapter, it is possible to integrate the
multifunction machine into an existing wireless net-
work as a network printer. It functions only with an
original adapter, which you can purchase through our
order service (see the back page of this user manual).
More information: www.fax.philips.com
Wireless Networks
One refers to a wireless network or WLAN (Wireless
Local Area Network) if at least two computers, printers
or other devices communicate in a network over radio
waves (high frequency waves). e data transmission in
the wireless network is based on the TCP/IP protocol.
Depending on the way the network is structured, it is
referred to either as an infrastructure or ad-hoc net-
work.
Infrastructure Wireless Network
In an infrastructure network, multiple devices commu-
nicate via a central access point (gateway, router). All
data are sent to the access point (gateway, router) and
distributed from there.
Ad-hoc Wireless Network
In an ad-hoc network, the devices communicate with
each other equally, without an access point (gateway,
router) acting as intermediary. e transmission rate
in an entire ad-hoc wireless network depends on the
worst connection in the network. e transmission rate
depends on the spatial distance as well as obstacles be-
tween the sender and receiver such as walls or ceilings.
Setting Up Wireless
Networks (WLAN)
ree steps are required to integrate your multifunction
machine into a wireless network (WLAN):
1 Configure the network on your PC.
2 Configure your multifunction machine for net-
work operation.
3 Install the software C S IH with the
required printer drivers on your PC after you have
configured the machine.
Æ
Before you configure the multifunction ma-
chine, the network must be set up on your PC
and, if applicable, on all connected devices (other
PCs, access point, gateway, router) and must be
functioning. All required information for config-
uration of the machine, such as network names
(SSID), radio channel, WEP key, IP address or
subnet mask must match the information of the
network. You can find this information on your
PC under S > S > N C-
. Select the WLAN there. Consult the
user manual of your WLAN adapter for instruc-
tions on how to configure the wireless network
on your PC. In larger networks, consult your
network administrator.
²
Faultless communication is ensured if you
also use an original adapter on your PC (see
order service on the back page of this user man-
ual). e newest drivers for the original adapt-
er and other information can be found on our
Internet page: www.fax.philips.com
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips CRYSTAL650 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips CRYSTAL650 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Philips CRYSTAL650

Philips CRYSTAL650 Gebruiksaanwijzing - Nederlands - 88 pagina's

Philips CRYSTAL650 Gebruiksaanwijzing - Deutsch - 88 pagina's

Philips CRYSTAL650 Gebruiksaanwijzing - Italiano - 84 pagina's

Philips CRYSTAL650 Gebruiksaanwijzing - Espanôl - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info