unplugging the power supply from the electrical
outlet. Ensure the electrical outlet is located
close to the apparatus and is always easily
accessible.
1.4 Telephone connection
The voltage on the network is classified as TNV-
3 (Telecommunication Network Voltages, as
defined in the standard UL 60950). Following a
power cut, the call in progress is lost.
1.5 Safety precautions
• Do not allow the handset to come into
contact with liquids or moisture.
• Do not open the handset, base station or
charger.This could expose you to high
voltages.
• Do not allow the charging contacts of the
charger or the battery to come into contact
with extraneous conductive materials.
• There is a slight chance that the telephone
could be damaged by an electrical storm. It
is recommended that users unplug the
phone from the USB socket and the phone
line from the phone wall socket during a
storm.
• Do not use the handset in an explosive
hazard area such as where there is gas
leaking.
• Young children should be supervised to
ensure that they do not play with the
telephone.
• Because the phone works by sending radio
signals between the base unit and the
handset, wearers of hearing aids may
experience interference in the form of a
humming noise.
• We advise that this phone should not be
used near intensive care medical equipment
or by persons with pacemakers.
• Your phone can interfere with electrical
equipment such as answering machines,TV
and radio sets if placed too close. It is
recommended that you position the base
unit at least one meter from such
appliances.
Warning
Use only the mains adapter supplied with this
telephone. Incorrect adapter polarity or voltage
can seriously damage the unit.
Warning
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries; use
recommended type supplied with this
telephone. NiMH batteries must be disposed of
in accordance with the applicable waste disposal
regulations.
FCC CERTIFICATION NUMBER IS LOCATED
ON THE CABINET BOTTOM
The term “IC:” before the certification number
signifies that Industry Canada technical
specifications were met.This certification means
that the equipment meets certain radio
communications and operational requirements.
1.6 Warranty
This Class B digital apparatus complies with
Canadian ICES-003.
The warranty informations are available on
www.p4c.philips.com.
1.7 Conformity
The Declaration of conformity is available on
www.p4c.philips.com.
1.8 Environmental care
Please remember to observe the local
regulations regarding the disposal of your
packaging materials, exhausted batteries
and old phone and, where possible,
promote their recycling.
Philips has marked the packaging with
standard symbols designed to promote
the recycling and appropriate disposal of
your eventual waste.
A financial contribution has been paid to
the associated national recovery &
recycling system.
The labeled packaging material is recyclable.
