545878
86
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
1 - Press
and press
(left)
Setup
.
2 - Click
Satellite Installation
>
Automatic Channel Update
and
click
Off
.
3 - Press
BACK
repeatedly if necessary, to close the menu.
You can set the TV to only update the channels of a specific
satellite.
To mark satellites for updating…
1 - Press
and press
(left)
Setup
.
2 - Click
Satellite Installation
and click
Automatic Update
Option
. In the list of satellites, click a satellite to mark or unmark.
3 - Press
BACK
repeatedly if necessary, to close the menu.
In certain countries, the automatic channel update is done while
watching TV or on any moment when the TV is in Standby.
Manual Channel Update
You can always start an channel update yourself.
To start a channel update manually…
1 - Press
and press
(left)
Setup
.
2 - Click
Satellite Installation
>
Search for Channels
and
click
Update Channels
.
3 - Follow the instructions on screen. The update may take a
few minutes.
Add a Satellite
You can add an additional satellite to your current satellite
installation. The installed satellites and their channels remain
untouched. Some satellite operators do not allow adding a
satellite.
The additional satellite should be seen as an extra, it is not your
main satellite subscription or not the main satellite of which you
use its channel package. Typically, you would add a 4th satellite
when you have 3 satellites already installed. If you have 4
satellites installed, you might consider removing one first to be
able to add a new satellite.
Setup
If you currently have only 1 or 2 satellites installed, the current
installation settings might not allow adding an extra satellite. If
you need to change the installation settings, you must redo the
complete satellite installation. You cannot use
Add satellite
if a
change of settings is needed.
To add a satellite…
1 - Press
and press
(left)
Setup
.
2 - Click
Satellite Installation
>
Search for satellite
and
click
Add Satellite
. The current satellites are shown.
3 - Click Search. The TV will search for new satellites.
4 - If the TV has found one or more satellites, click
Install
. The
TV installs the channels of the found satellites.
5 - To store the channels and radio stations, click
Finish
.
Remove a Satellite
You can remove one or more satellites from your current
satellite installation. You remove the satellite and its channels.
Some satellite operators do not allow removing a satellite.
To remove satellites…
1 - Press
and press
(left)
Setup
.
2 - Click
Satellite Installation
>
Search for satellite
and
click
Remove Satellite
. The current satellites are shown.
3 - Click on the satellite(s) to mark or unmark them to remove.
4 - Click
Remove
. The satellites are removed.
5 - Click
Exit
to close Remove Satellite.
Manual Installation
Manual Installation is intended for expert users.
You can use Manual Installation to quickly add new channels
from a satellite transponder. You need to know the frequency
and polarization of the transponder. The TV will install all
channels of that transponder. If the transponder was installed
before, all its channels - the former and the new ones - are
moved to the end of the channel list All.
You cannot use Manual installation if you need to change the
number of satellites. If this is needed, you have to do a complete
installation with Install Satellites.
To install a transponder…
1 - Press
and press
(left)
Setup
.
2 - Click
Satellite Installation
and click
Manual Installation
.
3 - If you have more than 1 satellite installed, select the
satellite/LNB for which you want to add channels.
4 - Set the
Polarization
you need. If you set the
Symbol Rate
Mode
to
Manual
, you can enter the symbol rate in
Symbol
Rate
manually. Enter the
Frequency
and start searching for the
transponder.
5 - If a transponder is found, click
Store
to store the new
transponder on the selected LNB.
6 - Click
Exit
to leave the manual installation.
LNB Settings
In some countries, you can adjust some expert settings for each
LNB.
LNB Power
By default, LNB Power is set to On.
22 kHz Tone
By default, the Tone is set to Auto.
Low LO Frequency / High LO Frequency
The local oscillator frequencies are set to standard values. Adjust
the values only in case of exceptional equipment that needs
86
86

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips 65PUS9809 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips 65PUS9809 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Philips 65PUS9809

Philips 65PUS9809 Gebruiksaanwijzing - Nederlands - 100 pagina's

Philips 65PUS9809 Gebruiksaanwijzing - Deutsch - 134 pagina's

Philips 65PUS9809 Gebruiksaanwijzing - Français - 133 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info