561037
77
Verklein
Vergroot
Pagina terug
1/119
Pagina verder
2 - Click
Antenna/Cable Installation
>
Search for Channels
and
click
Update
.
3 - Follow the instructions on screen. The update may take a
few minutes.
New channels
In the Channel List, newly found channels are marked with a
.
To open a list of only the new channels…
1 - Press
LIST
to open the Channel List.
2 - Press
OPTIONS
and click
Show New Channels
. You can
mark a channel as a favourite, lock or rename a channel.
3 - Press the colour key
Close
to close the list of new
channels.
Reinstall Channels
Reinstall Channels
You can reinstall all channels and leave all other TV settings
untouched.
If a child lock code is set, you will need to enter this code before
you can reinstall channels.
To reinstall channels…
1 - Press
and press
(left)
Setup
.
2 - Click
Antenna/Cable Installation
>
Search for Channels
and
click
Reinstall
.
3 - Follow the instructions on screen. The installation may take a
few minutes.
Reinstall TV
You can redo a full TV installation. The TV is completely
reinstalled.
To redo a full TV installation…
1 - Press
and press
(left)
Setup
.
2 - Click
General Settings
and click
Reinstall TV
.
3 - Follow the instructions on screen. The installation may take a
few minutes.
Factory Settings
You can set the TV back to the original TV settings (the factory
settings) for picture, sound and Ambilight.
To switch back to the original settings…
1 - Press
and press
(left)
Setup
.
2 - Click
General Settings
and click
Factory Settings
.
3 - Press
BACK
repeatedly if necessary, to close the menu.
Channel List Copy
Introduction
Channel List Copy is intended for dealers and expert users. In
some countries, Channel List Copy is only available for copying
satellite channels.
With Channel List Copy, you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel List Copy, you avoid the time-consuming channel
search by uploading a predefined channel list on a TV. Use a
USB flash drive of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current software version
You can check the current version of the TV software with
in
Setup
>
Update Software
>
Current Software Info
.
Copy Channel List
To copy a channel list…
1 - Switch on the TV. This TV should have channels installed.
2 - Plug in a USB flash drive.
3 - Press
and press
(left)
Setup
.
4 - Click
General Settings
>
Channel List Copy
and click
Copy
to USB
. You might be asked to enter the Child Lock PIN code
to copy the channel list.
5 - When copying is done, unplug the USB flash drive.
6 - Press
BACK
repeatedly if necessary, to close the menu.
Now you can upload the copied channel list onto another
Philips TV.
Upload Channel List
To not Installed TVs
Depending on whether your TV is already installed or not, you
must use a different method to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select
language and country. You can skip the channel search. Finish the
installation.
2 - Plug in the USB flash drive that holds the channel list of the
other TV.
3 - To start the channel list upload, press
and
press
(left)
Setup
.
4 - Click
General Settings
>
Channel List Copy
and click
Copy
to TV
. You might be asked to enter the Child Lock PIN code of
77
77

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Philips-49PUS7909

Zoeken resetten

  • Als ik in playstore ga word er gemeld geen resultaten gevonden,waarom kan ik niet meer downloaden Gesteld op 11-8-2021 om 15:45

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik mijn beeldbreedte veranderen hoogte is goed maar de breedte kan ik niet smaller makken ook niet met zoomen, Hans z
    .
    Gesteld op 17-1-2021 om 15:21

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik mijn Philips smart Tv draadloos met Spotify verbinden Gesteld op 4-1-2021 om 13:51

    Reageer op deze vraag Misbruik melden
  • ik kom niet meer in het hoofdmenu ik wi naar de fabrieksinstelling terug? handbediening reageert niet kan niet naar de bron instellingen
    Gesteld op 31-12-2020 om 10:22

    Reageer op deze vraag Misbruik melden
  • Mijn Philips tv 49PUS7909/12 wil niet helemaal meer uit sinds laatste software update. Rode stand-bye lampje blijft aan. Is hier een oplossing voor bekend? Gesteld op 14-5-2016 om 15:51

    Reageer op deze vraag Misbruik melden
    • Heb ik ook gehad,moest ik steeds de stekker eruit trekken,maar sinds de laatste update is het probleem bij mij voorbij Geantwoord op 6-6-2016 om 18:10

      Waardeer dit antwoord Misbruik melden
  • Indien ik op de joystick aan de achterzijde druk gaat het rode lampje niet uit? Voorheen ging dat wel. Volgens mij is dit veranderd na de laatste update. Ik kan de tv nu niet meer uitzetten. Wat te doen?
    Gesteld op 8-4-2016 om 12:42

    Reageer op deze vraag Misbruik melden
    • Ik heb de zelfde klacht. Kan de tv na de laatste software update niet meer uit zetten. Als de tv op standby staat en ik druk op de knop op de achterzijde dan gaat de tv weer aan. Geantwoord op 22-4-2016 om 09:06

      Waardeer dit antwoord (1) Misbruik melden
  • 6
  • Hoe krijg ik de afstandbediening van alleen spraakfunctie af bij youtube? Gesteld op 29-12-2015 om 13:11

    Reageer op deze vraag Misbruik melden
  • Ik heb een HDD recorder aangesloten via SCART. Als ik de HDD recorder aanzet, komt het beeld van recorder op TV scherm. Echter elke keer als de TV een nacht heeft uitgestaan, wordt de HDD niet meer herkend. Het lukt me niet om dit permanent te krijgen. Handmatig via source de SCART activeren lukt wel, maar moet dit iedere keer doen. Wat kan ik hieraan doen? Gesteld op 22-11-2015 om 14:08

    Reageer op deze vraag Misbruik melden
    • probleem had ik ook,steeds stekker eruit,maar sinds laatste update van enige weken geleden is het probleem over,recorder die ik gebruik is horizon van ziggo Geantwoord op 24-1-2016 om 13:30

      Waardeer dit antwoord Misbruik melden
  • heb net nieuwe tv zat instellingen te veranderen maar heb nu alleen geluid en geen beeld waar zal ik dat nu weer moeten veranderen weet echt niet meer waar ik op heb gezeten, als ik naar youtube ga dan kan ik wel een filmpje afspelen. Gesteld op 30-1-2015 om 09:54

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips 49PUS7909 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips 49PUS7909 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Philips 49PUS7909

Philips 49PUS7909 Gebruiksaanwijzing - Nederlands - 125 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Deutsch - 129 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Français - 128 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Italiano - 124 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Português - 124 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Espanõl - 124 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Polski - 127 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Türkiye - 118 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Dansk - 120 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Svenska - 120 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Norsk - 120 pagina's

Philips 49PUS7909 Gebruiksaanwijzing - Alle talen - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info