26
Connect Peripheral Equipment
& Connect your camera or camcorder to sockets at the right side of your TV.
é Connect the equipment to VIDEO 2 and AUDIO L 3 for mono
equipment.
“ Press the X key repeatedly to select the sound coming from one or
both loudspeakers of your TV.
‘ For stereo equipment also connect AUDIO R 3.
S-VHS quality with a S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VIDEO input 1 and AUDIO inputs 3.
Camera & camcorder
Connect your digital equipment with a eurocable 1 to one of the
euroconnectors (
EXT1, EXT2 or EXT3), or with a cinch cable to the VIDEO
input at the right side of the TV (see illustration above).
& Press U and f at the same time.
é Select Digital sources in the Setup menu of the INSTALLATION menu and
select:
•
None if you have no digital source connected,
•
EXT1, EXT2 or EXT3 if you have connected your equipment to a
euroconnector,
•
FRONT in case you connected to the right side of the TV-.
“ Press the Ï key to switch off all menus.
Note: the low quality of some digital picture material may be the cause of digital
image distortion. In this case select
Eco under the SMART PICTURE a key on the
remote control as this setting is intended to improve distorted picture quality.
Digital and other equipments
INSTALLATION
Menu language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
SETUP
J SETUP
& Insert the plug into the headphone socket L at the right side of the TV.
é Press ¬ on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND menu select Headphone volume to adjust the headphone
volume. See p. 12.
