24
Connect your computer
• Connect one end of a VGA cable (not supplied) to the video card of the
computer and the other end to the
VGA IN connector at the rear side of
the receiver or at the VGA connector behind the door at the front of the
receiver. See also p. 16, VGA input.
• Fix the connectors firmly with the screws on the plug.
• In case of a Multimedia computer, connect audio cables (not supplied) to the
audio outputs of your Multimedia computer and to the
AUDIO R (right) and
L (left) inputs next to the VGA IN connector.
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals
can be used together with the supplied adaptor. Macintosh computers with
Composite Sync and Sync on Green signals may need a special (not
supplied) adaptor or cable. Contact your dealer.
• Connect the supplied switchable adaptor for Apple video connectors to one
end of a VGA cable.
• Put the DIP switches on the adaptor in the following positions :
1234
off off on on
• Connect the end of the VGA cable with the adaptor to the video card of the
computer and the other end to the
VGA IN connector on the back or the
front of the receiver.
• Screw the connectors down firmly.
To reproduce computer screen information and/or channels, see p. 26.
