4
4.1
Setup
Picture and Sound
Smart settings
You can adjust each Smart setting with the settings in Picture or
Sound in Setup, TV settings. Adjust the brightness for a particular
Smart picture or adjust the bass for a Smart sound.
To return to the original smart setting values, undoing the
adjustments you made, first set up the TV in the smart setting you
want to reset. Then press h > Setup > TV settings, select Reset,
press OK and confirm.
Read more about Smart picture and sound settings in Help > Use
your TV > Watch TV > Smart picture and sound settings.
Picture
In the Picture menu, you can adjust all picture settings individually.
To open the Picture settings, press h > Setup > TV settings >
Picture.
• Contrast
Sets the contrast level of the picture.
• Brightness
Sets the brightness level of the picture.
• Colour
Sets the level of colour saturation.
• Hue
If NTSC is broadcast, hue compensates the colour variations.
• Sharpness
Sets the level of sharpness of fine detail.
• Noise reduction
Filters out and reduces the image noise in the picture.
• Tint
Sets the colours to Normal, Warm (reddish) or Cool (bluish).
Select Custom to set up your own personal settings in the Custom
menu.
• Custom tint
Use the slider bar to set the colour temperature of the picture.
• Pixel Precise HD
Controls the advanced settings of the Pixel Precise HD.
— HD Natural Motion removes motion judder and reproduces
smooth movement, especially in movies.
— 100 Hz Clear LCD gives a superior motion sharpness, better
black level, high contrast with a flicker-free, quiet image and a larger
viewing angle.
— Super resolution enables superior sharpness, especially on lines
and contours in the picture.
— Perfect contrast sets the level at which the TV automatically
enhances the details in the dark, middle and light areas of the
picture.
— Dynamic backlight sets the level at which power consumption
can be reduced by dimming the brightness intensity of the screen.
Choose for the best power consumption or for the picture with the
best brightness intensity.
— MPEG artefact reduction smooths the digital transitions in the
picture.
— Colour enhancement makes the colours more vivid and
improves the resolution of details in bright colours.
— Gamma is a non-linear setting for picture luminance and contrast.
Use the slider bar to set a higher or lower gamma value.
• PC mode
Sets the TV to the ideal pre-defined computer setting if a computer
has been connected.
• Light sensor
Adjusts the picture settings automatically to the lighting conditions of
the room.
• Picture format
Read Help > Use your TV > Watch TV > Picture format.
• Screen edges
Slightly enlarge the picture to hide distorted edges.
• Picture shift
Move the picture up / down or left / right with the cursor keys.
Sound
In the Sound menu, you can adjust all sound settings individually.
To open Sound settings, press h > Setup > TV settings > Sound.
• Bass
Sets the level of low tones in the sound.
• Treble
Sets the level of high tones in the sound.
• Surround
Sets the surround sound effect from internal speakers.
• Headphones volume
Sets the volume for the headphone connection of the TV.
• Auto volume levelling
Reduces sudden volume differences like at the beginning of adverts
or when switching from one channel to another.
• Balance
Sets the balance of the left and right speakers to best fit your
listening position.
Eco settings
Eco settings bundle the TV settings that help the environment.
While watching TV, press the Green key to open Eco settings.
Active settings are marked with a ê.
Press again to close.
Energy saving
This Smart picture setting sets the picture in the most ideal energy
conscious setting. To switch on, select Energy saving in Eco settings
and press OK.
To switch off Energy saving, select another Smart picture in the s
Adjust menu.
Mute screen
If you only listen to music, you can mute the TV screen to save
energy. Select Mute screen and press OK. To switch the screen
back on, press any key on the remote control.
Light sensor
The built-in light sensor automatically adjusts the picture to the
lighting conditions of the room. To switch on, select Light sensor
and press OK. To switch off, press OK again.
