& Connect your digital equipment with a eurocable 1 to one of
the euroconnectors (
EXT 1, 2 or 3), or with a cinch cable or a
S-VHS cable to the video input at the left side of the TV.
é To enjoy Multichannel surround sound from digital sources with
a Digital audio output also connect an audio cable 2 to the
SPDIF IN socket of your TV. Select Dig. Audio in 1 in the
Setup, Source menu, p. 10.
“ According to the connected digital equipment, select REC, DVD,
DVD-R, SAT, Game or Digital STB in the Setup/Source menu.
See p. 10.
HDMI is the leading new standard for Digital video and audio
interconnection. Eg. with a Digital Set top box or compatible DVD-R,
AV receiver, with DVI-equipped devices like a PC (only 640x480
display mode), ...
Connect your HDMI device with the
HDMI connector.
Note: Due to legal requirements it is possible that with certain copy
protected PCM audio qualities from a device connected to the HDMI input,
the SPDIF output signal is muted.
(This is not the case with the analogue AUDIO OUT output signal.)
HDMI (High Definition Multimedia Interface) connector
MultiChannel Surround receiver
& Connect a MultiChannel surround receiver (with or without
digital input connectors) to the
AUDIO OUT R and L
connectors at the bottom of your TV 1.
é If you want the loudspeakers of your TV to act as centre
speaker, also connect an audio cable 2 to the MultiChannel
surround receiver centre out connector and to the centre in
connector at the bottom of your TV.
“ Select Centre input On in the Setup, Source menu. See p. 10.
The loudspeakers of the TV will now only produce centre
sound.
‘ If necessary, adjust the volume level of the centre sound in the
Centre in volume menu item of the Source menu.The overall
volume has to be controlled via the MultiChannel surround
receiver.
( In case of a Digital MultiChannel surround receiver, also connect
the receiver to the
SPDIF OUT connector.
