11
Setup Menu
VCR, DVD, AMP and SAT keys
& Press ⁄ and Ÿ on the remote control at
the same time.
é With the cursor, select SETUP and press u.
“ Use the cursor to adjust :
•
Digital sources : if you have connected a digital
peripheral (DVD, satellite receiver, …), select
the corresponding connector :
FRONT, EXT1,
EXT2 or None.
• Decoder : select the programme(s) that use the
external decoder then select the connector
where the decoder is connected :EXT1 or EXT2.
Press Ì to return to the previous menu.
If the decoder is connected to the video recorder,
select the video recorder’s connector (
EXT2).
•
Information line : to activate or disable the
display of information on the programme
(if available).This information (name of channel
or broadcast) is displayed when the channels
are changed or by pressing
d.The content is
defined by the programme.
•
Factory settings : press u to reset the
factory picture and sound settings.
• Auto Surround
(only available on certain versions):
when this function is switched on, the
television set will automatically select Virtual
Dolby Surround sound when the identification
signal is being transmitted.
‘ To exit, press
Ì several times.
Most of the audio and video equipment from our range of products can
be operated with the remote control of your TV.
& Press one of the keys to select the required mode :
VCR (video
recorder),
DVD, AMP (amplifier) or SAT (satellite receiver).
The remote control indicator lights up to display the selected mode.
After 30 seconds of no buttons having been pressed the remote will
automatically return to tv mode.
é The following keys are operational, depending on the equipment :
b standby,
· recording,
¢ fast rewind,
Ê stop,
Æ play,
∫ fast forward,
⁄ VCR timer,
c DVD : title selection,
o DVD : subtitle selection
VCR : tape list function,
Ì menu,
cursor navigation and adjustments,
u validation,
09 digit keys,
@
P# programme selection,
e audio selection.
d OSD menu,
◊ DVD :T-C function
VCR : index function.
