activate
cursor to select
adjustments
return or switch
main menu on/off
Features menu
& Press the SETTINGS key to display/cancel the MAIN MENU.
é Use the cursor in the up/down directions to select the FEATURES menu.
“ Press the cursor right to activate the selected menu.
‘ Use the cursor in the up/down directions to select a menu item.
( Use the cursor in the left/right directions to select the desired setting.
Sleeptimer
With the sleeptimer you can set a time period after which the TV should
switch itself to standby.
The counter runs from
Off up to 180 min.
One minute before the TV is set to go to standby, the remaining seconds
appear on screen. Not visible in dual screen mode.You can always switch off
your set earlier or change the set time.
Child lock
If the child lock is on, the TV can only be switched on with the remote
control.The
P - and + keys on top of the TV cannot be used to select a TV
channel. In this way you can prevent unauthorised use of your TV.
If the message
Child lock On appears, the child lock must be switched off
before you can use the
P - and + keys on top of the TV to select a TV
channel.
Subtitle (for analogue channels only)
Analogue TV channels with teletext often transmit certain programmes with
subtitling. See Use of the remote control, Continuous Subtitles, p. 15 how to
select the proper subtitle page from the teletext index.
Select
Subtitle On or Off.
Press the
SETTINGS key to switch off the Features menu.
Programme list (when in analogue mode only)
& Press the SETTINGS key to display/cancel the MAIN MENU.
é Select PROGRAMMES with the cursor up/down.
“ Press the cursor right to activate and to display an overview of all the TV
channels installed.
‘ Press the cursor up/down to run through the list and press the SELECT/OK
key to select the desired TV channel.
( Press the SETTINGS key to switch off the Programme list.
