12
Make the connections as shown opposite.
With the
µ key, select AV/S-VHS.
For a mono set, connect the sound signal to the AUDIO L (or AUDIO R)
input.The sound automatically comes out of the left and right speakers
of the set.
Headphones
When headphones are connected, the sound on the TV set will be
cut.The
- ” +
keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Side connections
Amplifier
Computer
To connect to a home theater or hi-fi system, use an audio
connection cable and connect the sound output
Audio out on
the TV set to the “AUDIO IN” “L” and “R” input on your hi-fi
amplifier.
Connect the monitor output of your computer to the
PC VGA
In or DVI-D In
of the TV.
Attention: If you are using a Notebook computer, you need to toggle to the
monitor screen (please refer to your Notebook Computer user manual).
Connect the sound output Audio out L and R of the computer
to the input
Audio in (PC) of the TV.
Attention: the PIP feature is only available if a computer is connected
to the DVI-D In. For more information on using PC mode see page 9.
Configure the computer on 1024 x 768, 60 Hz for optimum
resolution.
Attention:
if you use another resolution, the PIP function may not work.
In this case a warning message is displayed on the screen.
Here is the list of the different display resolutions available on
your TV:
