There are three levels of menus that provide access to setup and control of the 20FT3010/37.
1. LCD Main Menu: The lowest menu level is the LCD main menu, which contains the menu items: picture & sound set-
tings, and tuner mode. This menu is normally not accessible and must be reached by the instructions below. Philips iTV rec-
ommends that the factory-setup picture and sound settings be kept. Also note that the current volume level is used as the MAX
volume when the "hotel mode" is activated.
2. LCD Hotel Mode Menu: The next menu level is the LCD hotel mode menu, which contains the following additional menu
items: ON CHANNEL, CHANNEL BLANK, KEYBOARD LOCK, OSD display, and ON VOLUME. Of these settings, only
ON VOLUME
is usable, since the highest level or hiFace module software will override hotel mode menu items. This menu is
normally not accessible and must be reached by the instructions below. ITV recommends that
ON VOLUME is the only menu
item set. The units are set at
ON VOLUME level "50", as set at the factory.
3. hiFace Menu: The highest menu level is the hiFace module menu, which contains most of the standard iTV features:
CHANNEL RING, AUTO-PROGRAMMING, KEYBOARD LOCK, ESP, WELCOME MESSAGE, CHANNEL GUIDE,
REMINDER, SECURITY, etc. The menu items missing are the volume controls (MAX / ON). These are available in the menu
levels previously discussed, but cannot be cloned. Only the menu items at this highest level can be cloned. The additional menu
setting is HIFACE CONTROL. This item must be ON for the hiFace module to control the panel and activate the SmartPort.
The only time that this menu item should be set to OFF, is when one accesses the service mode or accessing the other two lev-
els.
1. With iTV setup remote (in setup mode), press MENU button.
2. Cursor down through setup menu, set IFACE CONTROL OFF (IFACE 1.01) or AV LOCK ON (HCIFACE 0.07).Then
EXIT menu.
3. After the hiface control menu item is OFF, the IR switch should be set to the “out” position (see below) to prevent the IR
from reaching the hiFace module. This allows easy access to the other menu levels. Please note that this switch must be
set to the "in" position when the hiFace module is active.
14
DFU 20FT3010/37 050404.0944 PRELIMINARY
LCD Panel Menu Access
ENABLE IR ON LCD PANEL BY
PUSHING SWITCH OUT WITH
30mm-LONG PAPER CLIP OR
RIGID WIRE.
TV SETUP MENU
CHANNEL DISPLAY ALL
KEYBOARD LOCK OFF
ESP OFF
WELCOME MESSAGE >
CHANNEL GUIDE OFF
REMINDER OFF
3 DIGIT ENTRY OFF
A/CH A/V SWITCH OFF
IFACE CONTROL OFF
TV SETUP MENU
LANGUAGE ENGLISH
CHANNEL INSTALL >
CURRENT RING 1
SWITCH ON CHANNEL STANDARD
POWER ON STANDARD
ESP OFF
CHANNEL GUIDE ON
3 DIGIT ENTRY OFF
AV LOCK ON
IFACE 1.01 HCIFACE 0.07
