Philips Institutional TV Software
Typical Philips Institutional Televisions can be configured to operate in either "Consumer" or "Commercial" operational
modes. However, the 20FT3010/37 hiFace-based ITV product is primarily intended to operate in the Commercial mode.
Consumer-mode operation is not intended for the 20FT3010/37, because it is based on a consumer product (20PF7835)
that is adapted for commercial use by means of the hiFace module.
Commercial Mode
The configuration of Commercial mode features requires a Philips ITV master setup remote (RG4172BK or RC2573GR,
optional accessory). When the television is in Commercial mode, access to its operation from its keyboard or from a
guest-mode remote can be restricted, depending upon the settings of the Institutional TV features. For examples, the
unit’s keyboard controls can be “locked-out” (rendered inoperable), only certain channels can be selected, and the vol-
ume can be limited to a given range.
Identifying the Operational Mode: To identify the television’s operational mode, a system 7 (commercial setup mode)
master setup remote must be used. With the setup remote in setup mode (RG4172BK: press TV SETUP, or RC2573:
place switch in SETUP position), press Recall. The following information will appear on-screen, depending upon the
version of iFace / HcIface.
N
OTE: There are currently two versions of the 20FT3010/37. The respective versions are as indicated in the last line of
the respective SYSTEM STATUS.
8
DFU 20FT3010/37 050404.0944 PRELIMINARY
Philips ITV General Information
MODE COMMERCIAL
CHANNEL TV 12 (ANTENNA)
DCM OFF
CODES 96 1 98 48 8
0 200 32 32 34
SIGNAL TUNED
OP HRS 000Bh
IFACE 1.01
SYSTEM STATUS
RG4172BK RC2573GR
Philips ITV master setup remotes
MODE COMMERCIAL
CHANNEL AV2 (AV2)
DCM OFF
CODES 44 0 34 48 8
0 200 32 32 32
OP HRS 000Bh
HCIFACE 0.07 / 1.00
IFACE 1.01 HCIFACE 0.07 / 1.00
