33119
1
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Thank you for buying a Philips TV-Video combi.
This TV-Video combi is one of the most sophisti-
cated and easy-to-use TV-Video combi on the
market. Please take the time to read this operat-
ing manual before using your TV-Video combi. It
contains important information and notes regard-
ing operation. The TV-Video combi should not
be turned on immediately after transporta-
tion from a cold to a hot area or vice versa, or
in conditions of extreme humidity. Wait at least
three hours after transporting the device. The
TV-Video combi needs this time in order to
become acclimatised to its new environment
(temperature, air humidity, etc.).
This TV-Video combi is used for the recording and
playback of VHS videocassettes. Cassettes with
the VHS-C label (VHS cassettes for camcorders)
may only be used with a suitable adapter.
We hope you enjoy your new TV-Video combi.
Important notes regarding operation
Danger: High voltage!
There is a risk of an electrical shock!
The TV-Video combi does not contain any
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
As soon as the TV-Video combi is connect-
ed to the power supply, some components
are in constant operation. To-switch off the
TV-Video combi completely you must dis-
connect it from the mains or switch it off
with the main switch.
Make sure that air can circulate freely
through the ventilation slots on the TV-
Video combi. Do not place the device on an
unsteady base.
Make sure that no objects or liquids enter
the TV-Video combi. Do not place vases or
the like on the TV-Video combi. If liquid is
spilt into it, immediately disconnect the TV-
Video combi from the power supply and call
After-sales Service for advice.
Do not place any combustible objects on
the device (candles, etc.).
Make sure that children do not place any
foreign objects within the openings or venti-
lation slots.
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate col-
lection points.
Please make use of the facilities available
in your country for disposing of the packag-
ing of the TV-Video combi in a way that
helps to protect the environment.
This electronic device contains many materials
that can be recycled. Please enquire about the
possibilities for recycling your old device.
So that you can identify your machine for service
questions or in the event of theft, enter the serial num-
ber here. The serial number (PROD.NO.) is printed on
the type plate fixed at the back of the device.
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
Interference
The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence hold-
ers improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post
Office for the booklet 'How to lmprove Television
and Radio Reception'.
Specifications
Voltage: 230-240V/50Hz
Power consumption : 52W
Power consumption (Standby): less than 4W
Rewind time:
less than 240 seconds (cassette E-180)
Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette E-180)
6 hours (LP) (cassette E-180)
Supplied accessories
• Operating instructions
• Remote control and batteries
PAL
MODEL NO.
:
14PV111/07, 14PV112/07, 14PV415/07
14PV203/07, 14PV460/07
PROD. NO.
...........................
!
"
"
"
!
!
!
TVCR
14PV111/07 14PV112/07
14PV415/07 14PV203/07 14PV460/07
T6310EZ-I(EN).qx3 02.4.25 2:40 PM Page 1
EN
2
BRIEF
The remote control
To eject the cassette.
To delete last entry/Clear programmed recording (TIMER).
To record the TV channel selected at this moment or press
repeatedly to start a One-Touch Recording.
To stop the tape and show a still picture.
To select the programme number. During normal or slow motion playback,
press to adjust the tracking or vertical jitter.
To eliminate the sound. Press again to restore the volume.
To adjust the volume.
Doesn’t work in these models.
To select the switch-off time in 30 minutes intervals.
To switch TVCR On or Off or to interrupt menu function.
To call up main menu of TVCR.
To access or remove the TVCR’s on-screen status display. To exit
on-screen menus.
Press to select channels.
When tape playback is stopped, press to fast forward the tape at hight
speed. During playback, press to fast forward the tape while the picture stay on the
screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR
menu.
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stay on the screen.To
return the cursor in the menu. Press to adjust the controls of TVCR menu.
To play a tape, select an item in the menu of TVCR.
To stop the tape, select an item in the menu of TVCR.
<14PV203/07, 14PV460/07>
To switch TELETEXT on or off,or transparent mode.
: enlarge font
: switch TELETEXT decoder off temporarily
: Doesn’t work in these models.
:
recall hidden information
: stop page changes
: go back to start page.
Yellow button/ Select TELETEXT function when you are in TELETEXT mode.
o
l
p
o
l
p
TEXT
LC
KB
s0
B1
0..9
STATUS/EXIT
MENU
STANDBY/ON
yy
SLEEP
SYSTEM
5L5K
MUTE
P-P+
STILL
RECORD/OTR I
CLEAR
EJECT
AA
1 2 3
4 5 6
7 8
0
9
STANDBY/ON
EJECT
MENU STATUS/EXIT CLEAR
RECORD/OTR
STILL
P-
MUTE
P+
SYSTEM
SLEEP
TEXT
o
l
p
o
l
p
?
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 2
3
EN
Front of the device
Power switch: To switch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
Standby/on: To switch TVCR On or Off or to interrupt a menu function.
Volume: In connection with the button , to adjust the volume.
Programme number minus: previous programme number
Programme number plus: next programme number
Record: To record the programme currently selected.
Playback: To play a recorded cassette.
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at high speed.
When tape playback is stopped, press to rewind the tape at high speed.
Sockets on the front:
White socket / input socket: To connect a camcorder or video games (audio).
Yellow socket / input socket: To connect a camcorder or video games (video).
Small socket / socket for headphones: To connect headphones.
VIDEO
AUDIO
0
1
C
/
AA
B
I
P+
P-
+
55
yy
STANDBY
Back of the set
Aerial input socket: To connect the aerial cable.
Scart socket :To connect a satellite receiver, decoder, video recorder, etc.
The control lights at the front of machine
STANDBY Standby LED: lights up when the TV-Video Combi has been switched On by means of the main
switch.
RECORD Recording LED: lights up during recording.
Fast blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.
Slow blink: TIMER RECORDING is stored in a timer block.
EXT1/AV1
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 3
EN
4
Important for the United Kingdom
This apparatus is fitted with an approved 5 Amp plug.
To change a fuse in this type of plug proceed as fol-
lows:
1.
1.Remove fuse cover and fuse.
2.
2.Fix new fuse which should be a BS1362
5A,ASTA or BSI approved type.
3.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.
How to connect a plug:
The wires in the mains lead are coloured in
accordance with the following code:
BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')
4.
4.The BLUE wire must be connected to the ter-
minal which is marked with the letter 'N' or
coloured BLACK.
5.
5.The BROWN wire must be connected to the
terminal which is marked with the letter 'L' or
coloured RED.
6.
6.Do not connect either wires to the earth ter-
minal in the plug which is marked with the
letter 'E' or by the safety earth symbol or
coloured green or green-and-yellow.
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead-not imply over the two wires.
Preparing the remote control for
operation
The remote control and its batteries are packed sepa-
rately in the original TV-Video Combi packaging. You
must install the batteries in the remote control before
use.
1.
1.Take the remote control and the enclosed
batteries (2 batteries).
2.
2.Open the remote control's battery compart-
ment and place the batteries in it as shown in
the picture and close the battery compart-
ment.
The remote control is now ready to use.
Its range is approximately 7 metres.
Connecting the cable
1.
1.Insert the aerial cable plug into the AERIAL
at the back of the TV-Video Combi.
2.
2.Connect the mains cable to the wall socket.
3.
3.If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
switch. The power switch is located on the
left side panel of the set.
This text will appear on the TV screen.
You can find more details in chapter 'Preparation
for use'.
Connecting additional devices
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket..
The respective scart socket is usually marked
'
AV
'
or
'
TV
'
on the decoder or satellite receiver.
The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a
13A socket elsewhere.
1. Connecting the TV-Video Combi
PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR
THEN...
PUSH P+
KEY
OR...
FOR PLAY ONLY PUSH PLAY
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 4
<14PV203/07, 14PV460/07>
3.
3.'TIME' and 'DATE' will appear on the TV
screen.
4.
4.Check 'TIME'. If required, please change the
time with the number buttons .
5.
5.Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.
6.When all information is correct, save by
pressing .
The preparation for use is now complete.
STATUS/EXIT
0..9
5
EN
2. Important notes for operation
Navigation in the screen menu
You can check/change many functions and set-
tings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:
Call up the menu: with .
To select: with .
To enter or change your selection: with the
number buttons or with .
To save or confirm: with .
To cancel: with .
To end: with .
STATUS/EXIT
CLEAR
B1
LCKB
0..9
LCKB
MENU
Switching on
You can switch TV-Video Combi on with
.
Power outage/no power
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
STANDBY/ON
yy
SELECT KL CHOOSE B
TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
3. Installing your TV-Video Combi
Preparation for use
1.
1.After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
2.
2.The automatic TV channel search starts.
This picture will appear on the screen.
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
B1
PLEASE WAIT
START FINISH
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 5
EN
6
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
1.
1.Use
,
or to select the TV chan-
nel which you would like to allocate the
decoder to.
2.
2.Press . The main menu will appear.
3.
3.Use to select 'TUNER SET UP'.
Then press .
4.
4.Use to select 'MANUAL TUNING'.
Then press .
5.
5.Use to select 'DECODER'.
6.
6.Use to select 'ON'
(Decoder switched on).
7.
7.
To end, press .
The decoder has now been allocated to this TV
channel.
STATUS/EXIT
B1
LCKB
B1
LCKB
B1
LCKB
MENU
0..9
P-
P+
MANUAL TUNING
PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT KL CHOOSE B
END=EXIT
How can I switch off the decoder?
Use to select 'OFF' (Decoder switched
off).
B1
Manual TV channel search
In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.
1.
1.
Press . The main menu will appear.
2.
2.Select 'TUNER SET UP' with and
confirm with .
3.
3.Select 'MANUAL TUNING' with
and confirm with
.
4.
4.Select 'PROG.' with
. Then press
.
5.
5.With
or
, select the desired
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press .
6.
6.Select 'CHANNEL' with , and con-
firm with . Then enter the desired chan-
nel with
.
When a channel is found,it will stop searching. If
this is the channel you want, press . If you
set
'
SKIP
'
on for a channel, this channel will be
ignored when going through the channels with
or .
To search for other TV channels, begin again at
step 4.
7.
7.To end, press
.
STATUS/EXIT
P–
P+
B1
0..9
B1
LCKB
B1
0..9
LCKB
B1
LCKB
B1
LCKB
B1
LCKB
MENU
MANUAL TUNING
PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT KL CHOOSE B
END=EXIT
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
I don't know the channels for my TV stations In
this case, press in 'CHANNEL' to start
the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.
LCKB
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 6
7
EN
Using the satellite receiver
You can receive channels from the satellite
receiver via the scart socket .
To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys on the remote
control.You will have to select the channel you
want to receive on the satellite receiver itself.
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If you want to replace
the TV channels already saved with the new
ones, follow the instructions below.
1.
1.Press . The main menu will appear.
2.
2.Select 'TUNER SET UP' with and
confirm with .
3.
3.Select 'AUTO TUNING' with
and
confirm with
.
4.
4.The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.
5.
5.When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
B1
LCKB
B1
LCKB
MENU
0..9
AV1/EXT1
PLEASE WAIT
START FINISH
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
Sorting and clearing TV channels
manually
You can use this function to individually sort the
TV channels already saved or to delete unwant-
ed TV channels or those with poor reception.
1.
1.
Press . The main menu will appear.
2.
2.Select 'TUNER SET UP' with and
confirm with .
3.
3.Select 'MOVE' with , and confirm
with .
4.
4.With , select the saved TV chan-
nel that you want to move.
5.
5.Confirm with .
6.
6.Move the selected channel with to
the programme number you want to assign.
Then press . The programme number
will change to '_ _'.
7.
7.Confirm with .
8.
8.To assign other TV channels to a programme
number, repeat steps 4 to 7.
9.
9.Confirm the assignment of the TV channel
with
MOVE menu
.
10.
10.
To exit the
MOVE menu
, press
.
The following sorting of TV channels is recom-
mended:
P01: BBC1
P02: BBC2
P03: ITV
P04: CH4
P05: CH5
P06: SKY
and then all other TV channels.
STATUS/EXIT
B1
B1
LCKB
B1
LCKB
B1
LCKB
B1
LCKB
MENU
MOVE
P01: 02 P06: 90
P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT KL CHOOSE B
END=EXIT
The clock resets automatically
If you save a TV channel that transmits TXT/PDC
on programme number ‘P01’, date and time will
and constantly be updated. As a result, time
changes, i.e. daylight savings time, will be set
automatically.
T6310EZ-I(EN).qx3 02.4.25 2:40 PM Page 7
EN
8
Setting the clock
If the display shows an incorrect time or ' --:-- '
the time and date must be reset manually.
1.
1.Press . The main menu will appear.
2.
2.Select 'GENERAL SET UP' with
and confirm with .
3.
3.Select 'CLOCK' with and confirm
with .
B1
LCKB
B1
LCKB
MENU
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
4. TV SET FUNCTIONS
If you would like to change the volume on the
machine, press or on the TV-Video
Combi.
If you want to mute the sound temporarily
(e.g.:during a telephone call), press on
the remote control. When you press
again, the sound will return at its original vol-
ume level.
MUTE
MUTE
5
+
5
-
4.
4.Check the time in 'TIME'. If required, please
change the time with .
5.
5.Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
(Choose 'SMART CLOCK' ON or OFF with
. [14PV203/07, 14PV460/07] )
6.
6.To end, press
.
STATUS/EXIT
B1
0..9
<14PV203/07, 14PV460/07>
Time/date is displayed incorrectly despite
manual setting
* With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme num-
ber
'P01', date and time will automatically be
updated when the TV-Video Combi is in
Stand-
by
.
If you wish to switch this automatic time cor-
rection off, select 'OFF' for Smart Clock. You
can reactivate this function at any time by
selecting Smart Clock 'ON'.
Selecting a TV channel
Select the desired TV channel (= the programme
number) with , or with on the
remote control.
Selection of the scart socket
To select the Scart socket, please enter 0,0,1,
with the keys on the remote control. AV1
appears on the screen.
Selection of the front A/V sockets
To select the front A/V sockets, please enter
0,0,2, with the keys on the remote control.
'AV2' appears on the screen.
0..9
0..9
0..9
P-P+
Volume control
You can adjust the volume using , on
the remote control.
5L5K
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 8
9
EN
Picture settings
The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.
1.
1.Press the . The main menu will
appear.
2.
2.Select 'PICTURE CONTROL' with
and confirm with .
3.
3.Select an item using , and then
modify with .
4.
4.To end, press .
'TINT' appars only when receiving NTSC signals
from another source.
How do I read TELETEXT?
(14PV203/07, 14PV460/07)
Many TV channels transmit TELETEXT informa-
tion along with their TV channels. With this TV-
Video Combi you can retrieve this information
and display it on the screen using the built-in
TELETEXT decoder.
1.
1.Press to switch the TELETEXT
decoder on. Your TV-Video Combi will now
show TELETEXT for the TV channel you
have selected. Press again to show
TELETEXT in transparent mode.
2.
2.If you want to select another page, type in
the number of the page with the number but-
tons on the remote control.
3.
3.Press to switch the TELETEXT
decoder off.
TEXT
0..9
TEXT
TEXT
STATUS/EXIT
B1
s0
LC
KB
B1
LC
KB
MENU
Special TELETEXT functions
(14PV203/07, 14PV460/07)
In TELETEXT mode you can use the special
TELETEXT functions.
: enlarge font
:switch TELETEXT decoder off
temporarily
: recall hidden information
: stop page changes
: go back to start page
Switch-off function (SLEEP TIMER)
You can programme your set to switch-off auto-
matically after a predetermined period.
1.
1.Press .
The screen will show the time remaining until
switch-off, e.g.: '+0:30'.
2.
2.Press repeatedly to extend the time
until switch-off in 30 minute increments.
The machine now counts backwards to the
switch-off time.
SLEEP
SLEEP
o
l
p
o
l
p
SELECT KL ADJUST s
/
B
BRIGHTNESS < >
CONTRAST < >
COLOUR < >
SHARPNESS < >
TINT < >
END=EXIT
With the colour buttons on your remote control
you can directly select the page numbers
shown at the bottom of the TV screen.
The button takes you back to the start
page.
The maximum time period to be set until switch-
off is 2 hours.
If you would like to turn this function off, press
on the remote control several times
until switch-off appears. '--:--' will appear on the
screen.
To check the time until switch-off, press
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
SLEEP
SLEEP
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 9
Playing cassettes
You can use this TV-Video Combi to playback
recorded VHS video cassettes. You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
1.
1.Put a cassette into the cassette slot. The
cassette is inserted automatically.
2.
2.Press to view the tape.
3.
3.To stop the playback, press or on
the TV-Video Combi.
4.
4.To eject the cassette, press
or
when the TV-Video Combi stops the
playback.
C/
AA
EJECT
AA
C/
AA
LC
KB
EN
10
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
5. Playback
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system
reduces interference. For new or high quality
cassettes, it emphasises the details.
Picture/ sound quality is poor
When playing rental videos or older, poorer
quality cassettes, it may not be possible to
completely filter out picture and sound interfer-
ence. This is not a fault in your machine. Read
the section 'Manual tracking'.
Do I need to change the playback speed
when playing back LP recordings?
During playback, the correct speed will auto-
matically be selected. For more information,
please read the section 'Selecting the recording
speed (SP or LP)' in the chapter 'Manual
recording'.
Searching for a tape position with
picture (scanning)
1.
1.
While a cassette is playing, press
(reverse) or (forward) one or more
times.
2.
2.Press to resume playback.
Still picture
1.
1.During playback, press to stop the
tape and display a still picture.
2.
2.To continue playback, press .
Scanning and still motion interferes with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
Searching for tape position without
picture (forward wind and rewind)
1.
1.Stop the tape with .
2.
2.Press (reverse) or (forward).
3.
3.To stop the tape, press .
LC
B1
s0
LC
KB
STILL
2
KB
B1
s0
Manual Tracking
To adjust the tracking manually, press or
on the TV/VCR during playback
.
Tracking returns to Automatic Tracking
Adjustment when you press or insert a
tape.
LC
P-
P+
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 10
11
EN
General information
Use 'Manual Recording' to make a sponta-
neous recording (for example, a programme cur-
rently being shown).
If you want to start and stop a recording manual-
ly, read the section 'Recording without auto-
matic switch-off'.
If you want to start a recording manually but
have it stopped automatically, read the section
'Recording with automatic switch-off'.(e.g.
not to record to the end of the tape)
Read the section 'Automatic recording from a
satellite receiver', if you want a recording to be
controlled automatically by a satellite receiver.
Recording without automatic
switch-off
1.
1.Insert a cassette.
2.
2.Use or to select the pro-
gramme number you want to record, for
example, 'P01'.
3.
3.To start recording, press .
4.
4.To stop recording, press .
Recording with automatic switch-off
(OTR One-Touch-Recording)
1.
1.Insert a cassette.
2.
2.Use or to select the pro-
gramme number you want to record.
3.
3.Press .
4.
4.Each time you press you will
add 30 minutes to the recording time.
Preventing accidental erasing of
cassettes
All cassettes (except for rental and pre-recorded
purchased cassettes) have a security tab on the
back of the cassette.
To prevent recording
over important record-
ings (erasing), you can
remove this security tab.
If you later decide to
record on a protected cassette, simply cover the
hole with adhesive tape.
RECORD/OTR I
RECORD/OTR I
0..9
P-P+
LC
RECORD/OTR I
0..9
P-P+
Lining up recordings (assemble cut)
When you add a further recording to a cassette,
which already has a recording on it, a short
blank (flicker) can appear between the old and
the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as
follows:
1.
1.
Find the tape position of the old recording
where you want to insert the new recording.
2.
2.Look at the last minute of the old recording
(playback).
3.
3.Press at the tape position where
the new recording is to go and press
.
4.
4.Now start recording as usual by pressing
on the remote control.
5.
5.Stop recording with .
Selecting the recording speed (SP
or LP)
LP allows to double the recording duration on tape
(for example six hours instead of three hours on a
E180 cassette).
1.
1.Press . The main menu will appear.
2.
2.Select 'RECORD SETUP' with
and confirm with
.
3.
3.Select the required recording speed with
.
4.
4.To end, press .
STATUS/EXIT
B1
B1
LC
KB
MENU
LC
RECORD/OTR I
RECORD/OTR I
STILL
22
6. Manual recording
SELECT KL CHOOSE B
RECORD SPEED [SP]
END=EXIT
'SP'/'LP'
'SP': StandardPlay (normal recording speed)
offers the usual first-class picture quality.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3-
hour cassette (E180) with a somewhat reduced
picture quality.
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 11
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips 14PV203 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips 14PV203 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info