33089
1
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
1. CONNECT THE TV-VIDEO COMBI 4...................
Placingthebatteriesintheremotecontrol4...........
Connectingthecables5.............................
Connectingadecoderorotherequipment5............
2. INSTALLATION 6...................................
Initialinstallation6..................................
Allocatingadecoder6..............................
ManualTVchannelsearch7.........................
Satellitereceiver7..................................
Specialinstallationfunctions8.......................
AutomaticTVchannelsearch8......................
SortingandclearingTVchannelsmanually8...........
Settingthetimeanddate9...........................
3. TV SET FUNCTIONS 10..............................
SelectingaTVchannel10...........................
(Switch-onvolume)10...............................
Switch-offfunction(SLEEPTIMER)11.................
4. IMPORTANT NOTES FOR OPERATION 12..............
Generalinformation12..............................
Summaryofuserguide13...........................
Userguide(OSD)13.................................
5. PLAYBACK FUNCTIONS 14..........................
Playingapre-recordedcassette14...................
PlayingNTSCcassettes14...........................
Tapepositionindication14...........................
Searchingfortapepositionwiththepicture(picture
search)14.........................................
Stillpicture15......................................
Searchingfortapepositionwithoutthepicture
(winding)15........................................
’InstantViewfunction15............................
Automaticsearchforatapeposition(indexsearch)15..
Eliminatingpictureinterference(tracking)15...........
6. MANUAL RECORDING 16............................
Recordingwithoutautomaticswitch-off16............
Recordingwithautomaticswitch-off(OTR
one-touch-recording)16.............................
Protectingyourrecordings16........................
Auto-assembling16.................................
Selectingtherecordingspeed(SP/LP)17..............
7. PROGRAMMED RECORDING (TIMER) 18...............
Programmingarecording18.........................
Howtocheckorchangeaprogrammedrecording
(TIMER)19.........................................
Clearingaprogrammedrecording(TIMER)19..........
8. ADDITIONAL FUNCTIONS 20.........................
SwitchingOSDinformationon/off20..................
9. BEFORE YOU CALL AN ENGINEER 21..................
10. GLOSSARY 22......................................
Technicaltermsused22.............................
CONTENTS
The remote control
0..9 Number buttons:0-9
STANDBY m Standby : Turn machine off, cancel current
function.
Press for more than 3 seconds: cancel current
recording
MUTE y Volume off: To switch the volume on or off
RECORD n Record: To record the programme selected
z Previous programme number: To select the
respective previously selected programme
number
CLEAR (CL) Delete : Delete last entry (data)
TIMER k TIMER: To programme recordings or to
alter/clear programmed TIMER recordings
SELECT Red button / select functions : e.g.: in the Timer
overview
SMART Green button / No function
u Yellow button / No function
SLEEP Blue button / sleep timer: to select the
switch-off time in 15 minutes intervals
MENU Menu: To call up or close the main menu
TELETEXT e No function
;P q Select: Next programme number / in the menu: next line
=P r Select: Previous programme number / in the menu: previous line
QSr Select: Reduce volume / in the menu: to the left or to select settings/values
SqP Select: Increase volume / in the menu: to the right or to select settings/values
OK Store/Confirm: To store or confirm entry
INDEX E Index search: Search for the previous/next recording code on the tape in
combination with H / I
STILL R Still picture: Stop the tape and show the current picture as a still picture
H Rewind : During STOP or STANDBY: rewind, during PLAYBACK: reverse picture
search
STOP h Pause/Stop: Stop the tape, except with programmed recordings (TIMER)
Press for more than 3 seconds, eject tape
PLAY G Playback: To play a recorded cassette
I Forward wind: During STOP or STANDBY: forward wind, during PLAYBACK:
forward picture search
OPERATING INSTRUCTIONS IN BRIEF
Front of the set
8 Netzschalter: To switch off the machine
Caution: If you switch off using the power switch, TIMER-recordings are not possible!
m Standby : Switch machine off, cancel current function.
Press for more than 3 seconds: cancel current recording
P /S Volume: In connection with the button q , r to regulate the volume
r
Programme number minus: previous programme number
q
Programme number plus : next programme number
n
Record: To record the programme currently selected
G
Playback: To play a recorded cassette
?
Pause/Stop, eject cassette: To stop the tape; when STOP is pressed, the cassette will be
ejected from the machine
Back of the set
2 Aerial input socket: To connect the aerial cable
EXT
Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
The control lights at the front of the machine
STANDBY 5 Standby light: lights up when the TV-Video Combi has been switched on by means of the
main switch; it blinks when a button is pressed on the remote control
RECORD 5 Recording light: lights up during recording, Timer recording; blinks when timer recording is
unable to start
Thank you for buying a PHILIPSTV-Video Combi. The
14PV110/07 is one of the most sophisticated and simple-to-use
TV video recorders (TV-Video Combi) on the market. With this
device you can record and play VHS-standard cassettes.
Please take the time to read this operating manual before
using your set.
Safety instructions and other notes
ADanger: High voltage! Do not open!
There is a risk of an electrical shock!
AThe machine does not contain any components that can be
repaired by the customer. When the TV-Video Combi is
connected to the power supply there are some components that
are constantly operational. To switch off the TV-Video Combi
completely you must switch it off with the power switch.
BMake sure that air can circulate freely through the ventilation
slots on the machine. We recommend to leave approx. 5 cm of
space all around your machine to ensure proper ventilation.
BMake sure that no objects or liquids enter the machine. If liquid
is spilt into it, immediately disconnect the machine from the
power supply and call the After-sales Service for advice.
BThe machine should not be brought into a warm room directly
following a transport from a cold room or vice versa. Also, do
not use machine in extremely high humidity conditions.
After unpacking the TV-Video Combi, it should be allowed to
acclimatise for at least three hours before installation.
C These operating instructions have been printed on non-polluting
paper.
C Deposit old batteries at the respective collection points.
C Please make use of the facilities available in your country for
disposing of the packaging in a way that helps to protect the
environment.
C This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilities for recycling
your old set.
So that you can identify your machine in the event of theft,
enter the serial number here. You will find this serial number
(PROD.NO:) on the model plate at the back of the machine:
MODEL NO. 14PV110/07
PROD.NO: ......
This product complies with the requirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.
Interference
The Department of Trade and Industry operates a Radio
Investigation Service to help TV licence holders improve
reception of BBC and ITC programmes where these are being
spoilt by interference.
If your dealer cannot help, ask at a Main Post Office for the
booklet ’How to Improve Television and Radio Reception’.
Technical information
Voltage : 198-264V/ 50Hz
Power consumption : 48W
Power consumption (Standby): less than 6W
Measurements in cm (W/H/D): 36.9/40.1/37.2
Weight without packaging in kg:12.6
Winding time: Forward/rewind approx. 260/170 seconds
(Cassette E-180)
Number of video heads:2
Recording/Playback time: 4 Hours (Cassette E-240)
8 Hours (LP) (Cassette E-240)
List of accessories
Operating instructions
Remote control and batteries
Emergency interrupt
The machine and the remote control have an ’emergency
interrupt’. You can use the button STANDBY m to interrupt any
function. If you want to interrupt a running recording, hold the
STANDBY m button for several seconds.
Every time you are having operating problems, you can just
interrupt the function and start again.
You can practise operating your set without any worries. No
matter which buttons you press, you cannot damage the
machine in any manner.
OPERATING INSTRUCTIONS PHILIPS 14PV110/07
1
Special functions on your TV-Video Combi
Philips has developed a system which produces the best possible playback
quality. The interferences are reduced in old, frequently used video cassettes.
The details are enhanced with very good cassettes.
When you have plugged your TV-Video Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the automatic channel
search/store.
The tape speed for the recordings is cut in half, thus you can record 8 hours
onto a 4-hour-cassette. For playback, the correct recording speed will
automatically be selected.
With this set you can playback cassettes that have been recorded on another
video recorder in the NTSC standard (for example, American cassettes).
Switching between the different TV Systems takes place automatically.
The TV-Video Combi shuts itself off automatically after a certain
pre-programmed time period has elapsed (max. 4 hours).
Sleep timer settings can be programmed in steps of 15 minutes each.
2
Important for the United Kingdom
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
DNote: * The severed plug must be destroyed to avoid
a possible shock hazard should it be inserted into a
13A socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accordance with
the following code:
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
d The BLUE wire must be connected to the terminal which
is marked with the letter ’N’ or coloured BLACK.
e The BROWN wire must be connected to the terminal
which is marked with the letter ’L’ or coloured RED.
f Do not connect either wires to the earth terminal in the
plug which is marked with the letter ’E’ or by the safety
earth symbol \or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not imply over the
two wires.
Placing the batteries in the remote control
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b Close the battery compartment.
1. CONNECT THE TV-VIDEO COMBI
4
Connecting the cables
a Insert the aerial plug into the 2 socket.
b Insert the plug of the mains cable into the wall socket.
c If the little red standby light (STANDBY 5) at the front panel
of the set is not lit, please switch on the set using the
main power switch. The power switch 8 is located on
the left side panel of the set.
This text will appear on the TV screen.
IF YOU HAVE CONNECTED
THE AERIAL -
PRESS OK
d Then, read the section ’Initial installation’ in the chapter
’INSTALLING YOUR VIDEO RECORDER’.
Connecting a decoder or other equipment
You can also connect additional equipment to the EXT
socket; for instance, a decoder, satellite receiver or
camcorder.
DThe respective scart socket is usually marked ’AV’
or ’VCR’ on the decoder or satellite receiver.
5
Initial installation
a After you have connected the aerial, confirm the picture
on the TV screen with OK on the remote control.
The automatic TV channel search starts. This picture will
appear on the screen:
AUTO SEARCH
SEARCHING
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Wait until all TV channels have been found. This can take
several minutes.
b When the TV channel search is complete, STORED’ will
briefly appear on the TV screen.
The initial installation is now complete.
DCheck the time and date. Please read ’Setting the
time and date’ in this chapter.
DIf you have connected a satellite receiver, please
read the section ’satellite receiver’.
DIf you have connected a decoder, you must install it
as described in the next section.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a purchased or hired decoder. You
can connect such a decoder (descrambler) to your TV-Video
Combi. With the following function, the connected decoder
will automatically be activated for the TV channel you want to
watch.
a Select the TV channel for which you want to use the
decoder with the ;P q , =P r button on the
TV-Video Combi or the number buttons 0..9 on the
remote control.
b Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’MANUAL SEARCH’ with the menu
buttons ;P q or =P r and confirm with the
SqP button.
MANUAL SEARCH
PROGRAMME NUMBER W P01 X
FREQUENCY 754
DECODER OFF
EXIT: MENU STORE: OK
d Select the line ’DECODER’ with the menu buttons
=P r or ;P q .
e Select ’ON’ with the menu buttons QSr or
SqP .
DWhen you select ’OFF’, the decoder will not be
allocated.
f Confirm with the OK button.
g To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
2. INSTALLATION
6
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’MANUAL SEARCH’ with the =P r or
;P q button and confirm with the SqP button.
MANUAL SEARCH
PROGRAMME NUMBER W P01 X
FREQUENCY 754
DECODER OFF
EXIT: MENU STORE: OK
c In the line ’PROGRAMME NUMBER’, select the function
with the buttons QSr or SqP or use the
number buttons ’ 0..9 ’ on the remote control to select the
desired programme number, e.g.: ’P01’.
d Select the line ’FREQUENCY’ with the menu buttons
=P r or ;P q .
e Enter the frequency of the desired TV channel with the
number buttons 0..9 .
DIf you don’t know the frequency of the desired TV
channel, press SqP in line FREQUENCY’to
start the automatic search.
Repeat automatic search until you have found the
desired TV channel. A changing frequency number
will appear on the TV screen.
f If you want to allocate a decoder, in line ’DECODER
select ’ON’ using the button SqP .
g To store the TV channel, press OK .’STORED’ will
briefly appear on the TV screen.
DIf you would like to search for more TV channels,
start again at step b.
h To end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT .
a To do this, select the channel number ’E1’ using the
button 0 on the remote control. You will have to select
the channels to be received by the satellite receiver on
the receiver itself.
b Use the number buttons 0..9 on the remote control to
select the channels on the TV-Video Combi.
7
Special installation functions
You can select one of the following installation functions in
order to adapt your TV-Video Combi to your own specific
requirements.
Automatic TV channel search
Your TV-Video Combi will search for all TV channels.
DIf you want to start the automatic TV channel search
again, follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’AUTO SEARCH’ with the menu buttons
=P r or ;P q .
c Press the SqP button. The ’Automatic TV channel
search’ starts.
AUTO SEARCH
SEARCHING
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
d When the TV channel search is complete, STORED’ will
briefly appear on the TV screen.
e To end, press the MENU button.
Information on how to search for a TV channel manually can
be found in the section ’Manual TV channel search’.
Sorting and clearing TV channels manually
You can allocate a programmed TV channel to a random
programme number (e.g.: P01’) or you can delete a TV
programme recorded by mistake.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’TV CHANNEL ALLOC.’ with the menu
buttons =P r or ;P q .
c Confirm with the SqP button.
ALLOCATE ON P01’ will appear in the display.
TV CHANNEL ALLOC.
ALLOCATE ON P01
FREQUENCY W 754 X
EXIT: MENU STORE: OK
d Use the buttons QSr or SqP to select the
stored TV channel to which you wish to allocate the
programme number ’P01’.
e Confirm this allocation with OK . The following message
will briefly appear on the TV screen: ’STORED’.
f After that, the allocation for the next-highest programme
number will appear on the screen, e.g.: ’ALLOCATE
ON P02’.
g Use the buttons QSr or SqP to select the
stored TV channel which you wish to allocate the
programme number to, ’ e.g.: P02’.
DIf you want to delete a TV programme recorded by
mistake, press the button CLEAR (CL) .
h Confirm this allocation with OK . The following message
will briefly appear on the TV screen: ’STORED’.
DIf you confirm the last possible allocation using the
OK button, you will automatically be taken back to
the main menu. Continue at step k .
8
i Repeat steps fto huntil you have given a
programme number to all TV channels you wish to
allocate.
j To stop the allocation, press the MENU button.
k To exit the main menu, press the MENU button.
Setting the time and date
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’CLOCK’ using the =P r or ;P q
buttons and confirm this selection with the button
SqP .
CLOCK
YEAR W 2001 X
MONTH 01
DATE 01
TIME 20:00
STORE: OK
c Check the year displayed in the line ’YEAR’. If required,
please change the year with the number buttons 0..9 on
the remote control.
d Select the next line with ;P q or =P r .
e Check ’MONTH’, ’DATE’ and ’TIME’ in the same way.
f When all information is correct, confirm with OK .
STORED’ will briefly appear on the display.
g To end, press the MENU button.
9
Selecting a TV channel
Select the required TV channel (= the programme number)
with the ;P q , =P r buttons or with the digit buttons
0..9 on the remote control.
Channel number of the scart socket
a Select the channel number ’E1’ using the button 0 on
the remote control.
Volume control
You can adjust the volume using the QSr , SqP
buttons on the remote control.
DIf you would like to change the volume on the
machine, press the button P /S on the TV-Video
Combi and change the volume using the buttons
q or r .
DIf you want to mute the sound temporarily (e.g.:
during a telephone call), press the MUTE y button
on the remote control. When you press the
MUTE y button again, the sound will return at its
original volume level.
DWhile the sound is turned off, ’y’ will appear on the
screen.
Picture settings
The picture can be adjusted according to your personal
preferences.
These settings are automatically stored after exiting the main
menu.
a Press the MENU button. The main menu appears.
b Confirm the line ’TV SETTINGS’ using the button
SqP .
TV SETTINGS
BRIGHTNESS W(,=,,$X
COLOUR (,,=,$
CONTRAST (,=,,$
SHARPNESS (,,=,$
START UP VOLUME (=,,,$
EXIT: MENU
c Select the desired line with the =P r or ;P q button
and modify the settings using the QSr or
SqP button.
DIf you TV-Video Combi also has the function:
START UP VOLUME(Switch-on volume) , please
read more detailed information in the respective
section.
d To end, press the MENU button.
(Switch-on volume)
The function ’START UP VOLUME’ (switch-on volume)
regulates the volume when turning on the TV-Video Combi to
this preset value.
a In the line ’START UP VOLUME’ change the volume
using the buttons QSr or SqP .
3. TV SET FUNCTIONS
10
Switch-off function (SLEEP TIMER)
You can programme your set to switch-off automatically after
a predetermined period.
a Press the SLEEP button on the remote control.
The screen will show the time remaining until switch-off,
e.g.: ’+0:15’
b Press the button SLEEP repeatedly to extend the time
until switch-off in 15 minute increments.
DThe maximum time period to be set until switch-off is
4 hours.
The machine now counts backwards to the switch-off time.
DIf you would like to turn this function off, push the
SLEEP button on the remote control and then press
CLEAR (CL) when the time remaining until switch-off
appears.
’--:--’ will appear on the screen.
DTo check the time until switch-off, press the
SLEEP button on the remote control.
DIf a recording is in process, only the screen will be
switched off by the switch-off function.
11
General information
E We suggest that, from now on, you switch off your
TV-Video Combi with the m button on the front of the
set or with the STANDBY m button on the remote control.
When the set is in the standby mode, a small red lamp
(STANDBY 5) at the front of the set will be alight.
E You can switch the machine on with the ;P q ,
=P r or 0..9 buttons or by inserting a cassette.
AAttention: If you use the power switch 8 on the side
panel, you switch off the set completely from the mains
power supply. No programmed recordings are possible in
this state. The red standby lamp (STANDBY 5) at the front
of the set will not be alight. After some time, the date and
clock settings will be lost.
We therefore advise you to keep your TV-Video Combi
connected to the mains and keep the mains switch 8
on at all times to ensure that programmed recordings can
be made and that the television works normally. The
power consumption will be low.
E Attention: If you switch off the appliance using the power
switch 8 , make sure that you have removed the tape
by pressing the ? button.
E If the TV-Video Combi does not receive a signal for more
than 15 minutes, it switches off automatically to conserve
energy.
E If the TV-Video Combi is not plugged into the mains, the
TV channel information is stored for approx. one year and
the clock and timer information will be stored for approx.
30 minutes.
4. IMPORTANT NOTES FOR OPERATION
12
Summary of user guide
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
MAIN MENU
TV SETTINGS X
SPECIAL SETTINGS
CLOCK
AUTO TUNING
MANUAL SEARCH
TV CHANNEL ALLOC.
EXIT: MENU CONTINUE: p
Main menu
User guide (OSD)
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. Thus, you can
comfortably check your settings. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
E To call up the main menu: With the MENU button.
E To select a line: With the =P r or ;P q button.
E To enter or change your selection: With the 0..9 ,
QSr or SqP button.
E To cancel: With the STANDBY m button.
E Store/confirm: With the OK button.
E To close the main menu: With the MENU button.
DIf the symbol ’X appears on the right end of the
menu line instead of X’, the function of this line is
not possible.
TV SETTINGS
BRIGHTNESS W(,=,,$X
COLOUR (,,=,$
CONTRAST (,=,,$
SHARPNESS (,,=,$
START UP VOLUME (=,,,$
EXIT: MENU
Chapter ’TV SET FUNCTIONS - Picture settings’
CLOCK
YEAR W 2001 X
MONTH 01
DATE 01
TIME 20:00
STORE: OK
Chapter ’INSTALLING YOUR VIDEO RECORDER -
Setting time/date’
MANUAL SEARCH
PROGRAMME NUMBER W P01 X
FREQUENCY 754
DECODER OFF
EXIT: MENU STORE: OK
Chapter ’INSTALLING YOUR VIDEO RECORDER -
Manual TV channel search’
DThe summary of the OSD menus are examples and are intended to help you select the various functions. Sometimes,
they may slightly differ from the OSD menus on your TV-Video Combi.
13
Playing a pre-recorded cassette
a Put a cassette into the cassette slot (see illustration). The
cassette will be pulled in automatically.
b Press the button PLAY G to play the cassette. The
screen displays for example:
0:00:00
c
To stop, press the STOP h button.
d To eject the cassette, press ? on the front of the
TV-Video Combi while it is in Stop mode.
You may also use the STOP h button on the remote
control for more than 3 seconds.
DBefore transportation, make sure that there is no
cassette in the TV-Video Combi.
DIn case of colour problems during the use of special
functions (e.g.: still picture, picture search) the
colour is automatically switched off.
DSome hired cassettes may have poor picture or
sound quality. This is not a fault in your machine.
Please read ’Eliminating picture interference
(Tracking)’.
DSome functions will automatically switch off after a
while (e.g.: pause, still picture, picture search). This
helps to protect the cassette and avoids wasting
power.
DDuring playback, the machine will automatically
switch between the speeds ’LP/SP’. Please read the
section ’Selecting the recording speed (SP/LP)’ in
the chapter ’MANUAL RECORDING’.
Playing NTSC cassettes
With this TV-Video Combi you can playback cassettes that
have been recorded in NTSC standard on other video
recorders (e.g. American cassettes).
DDuring NTSC playback, ’NTSC will briefly appear on
the screen.
DSome special functions (e.g.: still picture) are not
possible during NTSC playback.
Tape position indication
By pressing OK you can show the present tape position on
the TV screen. You can read the elapsed playing time in hours,
minutes and seconds.
DIf you want to set the counter to ’0:00:00’, press
the CLEAR (CL) button.
DWhen you put a new cassette into the machine, the
counter will automatically reset to 0:00:00’.
DIf you rewind a cassette from the position
0:00:00’, the counter will show: ’-0:01:20
(rewound 1 minute 20 seconds from the ’0:00:00
position).
DIf there is an empty space on the tape, the counter
will stop.
Searching for tape position with the picture
(picture search)
a While a cassette is playing, press the H (reverse) or
I (forward) button once or several times. The screen
displays for example:
0:01:20
b
To stop at the desired position, press the PLAY G
button.
DThe picture quality is lessened during picture
search. The sound is deactivated.
5. PLAYBACK FUNCTIONS
14
Still picture
a Press the STILL R button. A still picture will appear on
the screen.
b Each time you press STILL R again, the picture will
move on one step.
DInterference stripes may appear on the screen
during still picture.
c To exit the still picture, press the PLAY G button.
Searching for tape position without the
picture (winding)
a Stop the tape with the STOP h button.
b Press the H (reverse) or I (forward) button. The
following will appear on the screen:
0:01:20
P01
c
To stop at the desired position, press the STOP h
button.
’Instant View’ function
With this function you can switch to picture search during
wind and rewind.
a If you hold the H (rewind) or I (forward) button
during wind or rewind, you will switch to picture search.
b When you release this button, the TV-Video Combi
automatically switches back to wind and rewind.
Automatic search for a tape position
(index search)
At the start of each recording, an index code is written on the
tape.
a In order to search for the previous or next index code,
press the INDEX E button and then the H button for
the previous code or the I button for the next code.
The following may appear on the screen for the next
code:
0:01:20
b
When the TV-Video Combi finds the marker, it will
automatically switch to playback mode.
Eliminating picture interference (tracking)
If the picture quality is poor during playback, you can manually
adjust the tracking.
a Press and hold the button ;P q or =P r during
playback until the playback quality reaches its best.
T+’ will appear on the screen when the button ;P q is
pressed. ’T-’ will appear when you press the button
=P r .
This setting will remain until the cassette is removed.
15
Use the ’Manual recording’ function to spontaneously start
recording (e.g. to record a TV show already in progress).
E Please refer to section ’Recording without automatic
switch-off’, if you want to manually start and stop your
own recording.
E Please refer to section ’Recording with automatic
switch-off’, if you would like to start your own recording
but want it to end automatically (e.g. not to record all the
way to the end of the cassette).
Recording without automatic switch-off
a Place a cassette in the machine.
b Use the button ;P q or =P r to select the
programme number which you would like to record from,
e.g. ’P01’. This picture will appear on the screen:
0:01:20
P01
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT scart socket).
c To record the TV programme, press the button
RECORD n on the remote control or the button n on the
TV-Video Combi.
DDuring recording, the recording lamp ’RECORD 5’on
the front of the machine lights up. The following will
appear on the screen:
0:01:20
P01
DUse the button OK to display the current tape
position on the screen.
d Stop recording with the STOP h button.
DIf you would like to turn off the screen during the
recording, press the button STANDBY m .
DTo switch the screen back on again, press the
;P q button.
DWith the screen switched off you can only stop a
recording in process by pressing the button
STANDBY m for more than 3 seconds.
DDuring a recording you can only watch the current
programme.
Recording with automatic switch-off
(OTR one-touch-recording)
a Place a cassette in the machine.
b Use ;P q or =P r to select the programme number
of the TV channel you wish to record.
c Press the RECORD n button on the remote control.
d Press the RECORD n button on the remote control several
times to add 30 minutes to the recording time.
DTo cancel this entry, press the CLEAR (CL) button.
DThe recording time can be extended only to up to 4
hours.
Protecting your recordings
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
Auto-assembling
You can use the auto-assembling function to join individual
recordings without any flickering between them.
a While the cassette is playing, search for the next
recording’s position on the tape.
b Press the STOP h button on the remote control. s
appears on the TV screen.
c Now start recording as usual by pressing the
RECORD n button on the remote control.
d Stop recording with the STOP h button.
6. MANUAL RECORDING
16
Selecting the recording speed (SP/LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’SPECIAL SETTINGS’ with the buttons
=P r or ;P q and confirm with the SqP
button.
c Choose the desired recording speed in the line ’RECORD
SPEED’ using the buttons QSr or SqP .
DLP: LongPlay = half recording speed (double
recording period).
SP: StandardPlay = normal recording speed.
d Confirm with the OK button.
e To end, press the MENU button.
DThe picture quality with LP recordings will not be as
good as it is with SP recordings.
DFor playback, the correct speed will automatically
be selected.
17
Use programmed recording to automatically start and stop a
recording at a later date.
The TV-Video Combi requires the following information for
each programmed recording:
* the date you want to make the recording
* the programme number for the TV channel you want to
record
* the start and stop time of the recording
The TV-Video Combi stores all above mentioned information in
a so-called TIMER-Block. You can programme up to 6 TIMER
blocks a whole month in advance.
Programming a recording
a Press the TIMER k button on the remote control. The free
TIMER block will be highlighted.
b Press the TIMER k button. The current information will
appear on the screen.
TIMER PROGRAMMING
DATE PROG. START END
01 01 20:15 21:30
STORE: OK
c Use the buttons SqP or QSr to select
different entry fields: ’DATE’ (Date), PROG.’ (Programme
number), ’START’ (Start time), ’END (End time).
Enter or change your information with ;P q or
=P r , or with the number buttons 0..9 .
d If all information is correct, press the OK button.
DThe information has been stored in a TIMER block.
e Insert a cassette that is not erase protected.
f Switch off using the STANDBY m button.
The programmed recording will only function properly, if
the TV-Video Combi has been switched off using the
button STANDBY m .
DIf the TV-Video Combi is turned on a few minutes
before beginning a programmed recording or if is
being used for playback, PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button OK ,to
continue the programmed recording session. The
TV-Video Combi switches off during this operation.
DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
would like to stop a programmed recording session,
press the button STANDBY m for more than 3
seconds.
DDuring recording, the red recording light at the front
of the machine (RECORD 5) will be alight.
DIf the end of the cassette is reached during a
recording, the TV-Video Combi will automatically
eject the cassette.
DIf you forgot to insert a cassette, NO CASSETTE
will appear.
DIf you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected automatically.
DIf ’ALL TIMERS OCCUPIED’ appears on the TV
screen when you press the TIMER k button, you
have used up all the available TIMER blocks. If you
want to clear or check a programmed recording
(TIMER block), select it with ;P q or =P r .
DIf the message ’DATA ERROR’ appears on the
screen momentarily, the data for the recording was
not transferred. Please check date, start time and
end time of the programmed recording
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT scart socket).
7. PROGRAMMED RECORDING (TIMER)
18
How to check or change a programmed
recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the =P r or ;P q buttons to select the
programmed recording (TIMER) you wish to check or
change.
c Press the TIMER k button.
d Select the entry field with the QSr or SqP
button.
e Change any displayed information with the =P r or
;P q button or with the 0..9 buttons.
f Confirm with the OK button.
g Make sure that the cassette you have inserted is not
erase protected.
h Switch off using the STANDBY m button.
DThe programmed recording will only function
properly, if the TV-Video Combi has been switched
off using the button STANDBY m .
DIf the TV-Video Combi is turned on a few minutes
before beginning a programmed recording or if is
being used for playback, PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button OK ,to
continue the programmed recording session. The
TV-Video Combi switches off during this operation.
Clearing a programmed recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the button =P r or ;P q to select the
programmed recording (TIMER) which you wish to clear.
c Press the CLEAR (CL) button.
The selected programmed recording (TIMER) has now
been deleted.
d To end, press the MENU button.
19
Switching OSD information on/off
You can tailor the on-screen display (OSD) of the current mode
(e.g.: playback, record). to your personal needs.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’SPECIAL SETTINGS’ with the buttons
=P r or ;P q and confirm with the SqP
button.
SPECIAL SETTINGS
RECORD SPEED W SP X
OSD AUTO
EXIT: MENU STORE: OK
c In the line ’OSD’, select one of the options shown using
the button SqP .
AUTO:
The OSD information appears with every selected mode
for a few seconds and disappears again.
MAX:
Additionally, date and time are displayed with every
selected mode.
OFF:
The OSD information is switched off. However, you can
use the button OK to display the OSD information on the
screen.
d Confirm with the OK button.
e To end, press the MENU button.
8. ADDITIONAL FUNCTIONS
20
If you encounter problems with your TV-Video Combi, these
could be caused by one of the following. You can also call the
customer service centre in your country.
The telephone number is listed in the enclosed warranty
information packet or on the last page of the manual cover.
Have the model number (MODEL NO) and the production
number (PROD.NO) of your video recorder ready. You can find
both numbers printed on the type plate fixed at the rear of the
set.
Your TV-Video Combi does not respond to any button being
pressed:
TV-Video Combi has been switched off using the power switch
8 : switch machine on on left side using the power switch.
There is no power supply: Check the power supply.
A programmed recording is currently being made: If desired,
cancel the programmed recording pressing the
STANDBY m
button (for longer than 3 seconds).
Remote control does not work
The red standby lamp (STANDBY 5) does not blink, if one of the
buttons on the remote control is pressed:
Remote control not pointed toward the TV-Video Combi: Point the
remote control at the TV-Video Combi.
There is a technical problem: Take out the batteries, wait for 10
seconds and place them back.
Batteries are weak: Change the batteries.
Technical problem:
Switch machine off using power switch 8 , wait 30 seconds
and switch back on.
You can reset the settings on your set (careful: all information will
be deleted):
1. Switch machine off using power switch
8 .
2. Press the
m button on the machine and hold button. Switch
back on using power switch
8 .
3. If the standby lamp (
STANDBY 5) on the set begins to blink,
release the
m button.
The machine settings are reset and the data memory is deleted.
No picture (black/blue picture):
The red standby lamp (STANDBY 5) on the front of the set is not
lit up:
TV-Video Combi switched off: Switch on the set using the mains
switch on the left side of the unit.
There is no power supply: Check the power supply.
The red standby lamp (
STANDBY 5) on the front of the set is lit:
TV-Video Combi switched off automatically: Switch it back on
using the
;P q button.
Switched to the programme number of an external source, e.g.:
E1’ for the scart socket EXT , but the attached device is
turned off: Switch on external device or choose a different
programme number.
A TV channel (programme number) has been chosen but there is
no reception on this channel: Select the correct TV channel.
No reception: Have the aerial checked.
Some of the menu lines can be selected, but are without
functions:
Recording is in session; if required, cancel recording session.
Cassette is jammed in the TV-VIDEO Combi:
Don’t use force. Switch off with the 8 power switch for 30
seconds, then switch it on again.
No playback on the TV-Video Combi:
There is no recording on the cassette: Change the cassette.
Poor quality playback on the TV-Video Combi:
The cassette is badly worn or of poor quality: Use a new
cassette.
Tracking is not properly adjusted: Turn to chapter ’PLAYBACK
FUNCTIONS’ and read the section ’Eliminating picture
interference’.
Poor playback of recordings made via the scart socket
EXT :
Recording copy-guarded data via the scart socket EXT can
lead to picture/sound distortions. This is not a fault in your
machine.
The TV-Video Combi will not record:
The TV channel is not stored or not selected properly: Check TV
channels stored.
You have loaded a cassette which is erase protected: Undo the
erase protection on the cassette.
Programmed recording does not work:
You have not set the TIMER properly: Check the TIMER blocks.
Clock/date were set incorrectly: Check clock/date.
You have put in a cassette that is erase protected: Undo the
erase protection on the cassette.
The machine has not been switched to standby when recording
starts: Switch machine off in time before recording using the
STANDBY m button.
9. BEFORE YOU CALL AN ENGINEER
21
Technical terms used
Current tape position
The part of the tape currently being played.
External source
A device connected via a socket (e.g.: scart socket) which
transmits audio/video signals to the TV-Video Combi.
Index code
A code which is automatically recorded on the tape at the
beginning of every recording. This code (recording ID) can be
searched for with the Index search function.
Scart cable
Also known as a Euro-AV cable. This standard cable is an
easy method of connecting various audio and video devices,
computers and televisions. Other signals in addition to audio
and video signals can be transmitted on it.
TV system
There are various systems for transmitting television signals,
for example, PAL, SECAM, PAL BG, SECAM DK, SECAM L/L,
NTSC,... The system used by your television depends on which
country you are in.
OTR
One touch recording (recording using one button). This
function enables you to select the switch-off time in intervals
of 30 minutes.
Standby
Standby is an operating mode which you can activate by
pressing the STANDBY m button (remote control) or the m
button (front of machine) of your TV-Video Combi.
In order to recognise this operating mode, the red standby
lamp (STANDBY 5) at the front of the set will be alight.
Preprogrammed recordings are possible.
In order to switch the TV-Video Combi back on, select a TV
channel using the buttons 0..9 , ;P q or =P r on the
remote control or the buttons q or r on the front of the
machine.
OSD
The OSD (On Screen Display) feature displays information
regarding counter, programme number, operating mode
(record, play,) on the screen. The OSD also provides
increased ease of use via screen menus.
10. GLOSSARY
22
3103 166 29061
0515/011 14PV110/07
(WwnnNNNwwnwNNnwnWwnNnwNWnNwwnN)
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips 14PV110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips 14PV110 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info